Bind-mounting symlinks is apparently not possible, which is why the
thing was failing.
Fortunately, symlinks are small, so we can fallback to copy them at no cost.
Fix https://github.com/NixOS/nix/issues/9579
Co-authored-by: Artturin <Artturin@artturin.com>
Now that we have a few things identifying content address methods by
name, we should be consistent about it.
Move up the `parseHashAlgoOpt` for tidiness too.
Discussed this change for consistency's sake as part of #8876
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
This was used in only one place, namely builtins.fetchurl with an
expected hash. Since this can cause similar issues as described
in #9814 and #9905 with the "locked" flag for fetchTarball and fetchTree,
let's just remove it.
Note that if an expected hash is given and the hash algorithm is
SHA-256, then we will never do a download anyway if the resulting
store path already exists. So removing the "locked" flag will only
cause potentially unnecessary HTTP requests (subject to the tarball
TTL) for non-SHA-256 hashes.
This probably snuck in in a refactor using truthiness or so. The
trustedness flag was having the optional fullness checked, rather than
the actual contained trust level.
Also adds some tests.
```
m1@6876551b-255d-4cb0-af02-8a4f17b27e2e ~ % nix store ping
warning: 'nix store ping' is a deprecated alias for 'nix store info'
Store URL: daemon
Version: 2.20.4
Trusted: 0
m1@6876551b-255d-4cb0-af02-8a4f17b27e2e ~ % nix doctor
warning: 'doctor' is a deprecated alias for 'config check'
[PASS] PATH contains only one nix version.
[PASS] All profiles are gcroots.
[PASS] Client protocol matches store protocol.
[INFO] You are trusted by store uri: daemon
```
code blocks, if not surrounded by empty lines, have the language
tags (in these cases, always `nix`) show up in the output of :doc.
for example:
nix-repl> :doc builtins.parseFlakeRef
Synopsis: builtins.parseFlakeRef flake-ref
Parse a flake reference, and return its exploded form.
For example: nix builtins.parseFlakeRef
"github:NixOS/nixpkgs/23.05?dir=lib" evaluates to: nix { dir =
"lib"; owner = "NixOS"; ref = "23.05"; repo = "nixpkgs"; type =
"github"; }
is now instead:
nix-repl> :doc builtins.parseFlakeRef
Synopsis: builtins.parseFlakeRef flake-ref
Parse a flake reference, and return its exploded form.
For example:
| builtins.parseFlakeRef "github:NixOS/nixpkgs/23.05?dir=lib"
evaluates to:
| { dir = "lib"; owner = "NixOS"; ref = "23.05"; repo = "nixpkgs"; type = "github"; }
When querying all paths in a binary cache store, the path's representation
is `<hash>-x` (where `x` is the value of `MissingName`) because the .narinfo
filenames only contain the hash.
Before cc46ea1630 this worked correctly,
because the entire path info was read and the path from this
representation was printed, i.e. in the form `<hash>-<name>`. Since then
however, the direct result from `queryAllValidPaths()` was used as `path`.
Added a regression test to make sure the behavior remains correct.
This was part of approved PR #10021. Unfortunately that one is stalled
on a peculiar Linux test timeout, so trying to get bits of it merged
first to bisect failure.
Forcing a conditional include, vs making the headers content
conditional, I think is more maintainable.
It is also how the other platform-specific headers (like
`namespaces.hh`) have been adapted.
A possible use of them might have been to figure out the paths
(which can now be retrieved with maybePathsOut), but I have
not found evidence that it was used this way, and it would have
been broken, because non-CA outputs weren't recorded in the map.
It's a little weird we don't check the return status for these, but
changing that would introduce risk so I did not.
Co-authored-by: Théophane Hufschmitt <7226587+thufschmitt@users.noreply.github.com>
This introduces new utility functions to get elements from JSON — in an ergonomic way and with nice error messages if the expected type does not match.
Co-authored-by: John Ericson <John.Ericson@Obsidian.Systems>
This splits files and adds new identifiers in preperation for supporting
windows, but no Windows-specific code is actually added yet.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
This patch makes `makeDecompressionSink` strip only a single layer
of compression specified via method. This fixes erroneous decompression
of doubly-compressed NARs fetched with curl.
This function is nice for more than `PosixSourceAccessor`. We can make a
few things simpler with it.
Note that the error logic slightly changes in some of the call sites, in
that we also count `ENOTDIR` and not just `ENOENT` as not having the
file, but that should be fine.
HintFmt(string) invokes the HintFmt("%s", literal) constructor,
which is not what we want here. Add a constructor with a proper name
and call that.
Next step: rename all the other ones to HintFmt::literal(string).
Fixes https://github.com/NixOS/nix/issues/10238
Thunks are now overwritten by a helper function
`Value::finishValue(newType, payload)` (where `payload` is the
original anonymous union inside `Value`). This helps to ensure we
never update a value elsewhere, since that would be incompatible with
parallel evaluation (i.e. after a value has transitioned from being a
thunk to being a non-thunk, it should be immutable).
There were two places where this happened: `Value::mkString()` and
`ExprAttrs::eval()`.
This PR also adds a bunch of accessor functions for value contents,
like `Value::integer()` to access the integer field in the union.
Fixes an instance of
nix: src/libutil/util.cc:139: nix::Path nix::canonPath(PathView, bool): Assertion `path != ""' failed.
... which I've been getting in one of my shells for some reason.
I have yet to find out why TMPDIR was empty, but it's no reason for
Nix to break.
Fixes
terminate called after throwing an instance of 'boost::wrapexcept<boost::io::too_few_args>'
what(): boost::too_few_args: format-string referred to more arguments than were passed
Aborted (core dumped)
for type errors in AttrCursor.
In a daemon-based Nix setup, some options cannot be overridden by a
client unless the client's user is considered trusted.
Currently, if an untrusted user tries to override one of those
options, we are silently ignoring it.
This can be pretty confusing in certain situations.
e.g. a user thinks he disabled the sandbox when in reality he did not.
We are now sending a warning message letting know the user some options
have been ignored.
Related to #1761.
This is a cherry-pick of 9e0f5f803f.
The above commit has been reverted by
a59e77d9e5 to prevent spamming warnings
with experimental features, but these are now totally ignored on the
daemon side, so there's no reason for the revert any more.
Previously, `state.mkList()` would set the type of the value to tList
and allocate the list vector, but it would not initialize the values
in the list. This has two problems:
* If an exception occurs, the list is left in an undefined state.
* More importantly, for multithreaded evaluation, if a value
transitions from thunk to non-thunk, it should be final (i.e. other
threads should be able to access the value safely).
To address this, there now is a `ListBuilder` class (analogous to
`BindingsBuilder`) to build the list vector prior to the call to
`Value::mkList()`. Typical usage:
auto list = state.buildList(size);
for (auto & v : list)
v = ... set value ...;
vRes.mkList(list);
* Add regression test
* Fix 'no repo' test so it doesn't succeed if the data is still in cache
* Use git_revparse_single inside git-utils instead of reimplementing the same logic.
Previously, errors while printing values in `nix repl` would be printed
in `«error: ...»` brackets rather than displayed normally:
```
nix-repl> legacyPackages.aarch64-darwin.pythonPackages.APScheduler
«error: Package ‘python-2.7.18.7’ in /nix/store/6s0m1qc31zw3l3kq0q4wd5cp3lqpkq0q-source/pkgs/development/interpreters/python/cpython/2.7/default.nix:335 is marked as insecure, refusing to evaluate.»
```
Now, errors will be displayed normally if they're emitted at the
top-level of an expression:
```
nix-repl> legacyPackages.aarch64-darwin.pythonPackages.APScheduler
error:
… in the condition of the assert statement
at /nix/store/6s0m1qc31zw3l3kq0q4wd5cp3lqpkq0q-source/lib/customisation.nix:268:17:
267| in commonAttrs // {
268| drvPath = assert condition; drv.drvPath;
| ^
269| outPath = assert condition; drv.outPath;
… in the left operand of the OR (||) operator
at /nix/store/6s0m1qc31zw3l3kq0q4wd5cp3lqpkq0q-source/pkgs/development/interpreters/python/passthrufun.nix:28:45:
27| if lib.isDerivation value then
28| lib.extendDerivation (valid value || throw "${name} should use `buildPythonPackage` or `toPythonModule` if it is to be part of the Python packages set.") {} value
| ^
29| else
(stack trace truncated; use '--show-trace' to show the full trace)
error: Package ‘python-2.7.18.7’ in /nix/store/6s0m1qc31zw3l3kq0q4wd5cp3lqpkq0q-source/pkgs/development/interpreters/python/cpython/2.7/default.nix:335 is marked as insecure, refusing to evaluate.
```
Errors emitted in nested structures (like e.g. when printing `nixpkgs`)
will still be printed in brackets.
Strings are now printed directly when evaluated by `:print`, rather than
escaped. This makes it easier to debug multi-line strings or strings
containing quotes, like the results of `builtins.readFile`,
`lib.toShellArg`, and so on.
```
nix-repl> "cuppy\ndog\ncity"
"cuppy\ndog\ncity"
nix-repl> :p "cuppy\ndog\ncity"
cuppy
dog
city
```
Fixes this very long warning, which I'll only include the first line of:
/nix/store/8wrjhrycpshhc3b41xmjwvgqr2m3yajq-libcxx-16.0.6-dev/include/c++/v1/__memory/construct_at.h:66:5: warning: destructor called on non-final 'RegexMatcher' that has virtual functions but non-virtual destructor [-Wdelete-non-abstract-non-virtual-dtor]
__loc->~_Tp();
`nix eval` forces values and prints derivations as attribute sets, so
commands that print derivations (e.g. `nix eval nixpkgs#bash`) will
infinitely loop and segfault.
Printing derivations as `.drv` paths makes `nix eval` complete as
expected. Further work is needed, but this is better than a segfault.
This wasn't caught by CI because #10149 and #10152 pass
individually... It doesn't happen on lazy-trees either because we
never try to fetch relative path flakes (#10089).
we now keep not a table of all positions, but a table of all origins and
their sizes. position indices are now direct pointers into the virtual
concatenation of all parsed contents. this slightly reduces memory usage
and time spent in the parser, at the cost of not being able to report
positions if the total input size exceeds 4GiB. this limit is not unique
to nix though, rustc and clang also limit their input to 4GiB (although
at least clang refuses to process inputs that are larger, we will not).
this new 4GiB limit probably will not cause any problems for quite a
while, all of nixpkgs together is less than 100MiB in size and already
needs over 700MiB of memory and multiple seconds just to parse. 4GiB
worth of input will easily take multiple minutes and over 30GiB of
memory without even evaluating anything. if problems *do* arise we can
probably recover the old table-based system by adding some tracking to
Pos::Origin (or increasing the size of PosIdx outright), but for time
being this looks like more complexity than it's worth.
since we now need to read the entire input again to determine the
line/column of a position we'll make unsafeGetAttrPos slightly lazy:
mostly the set it returns is only used to determine the file of origin
of an attribute, not its exact location. the thunks do not add
measurable runtime overhead.
notably this change is necessary to allow changing the parser since
apparently nothing supports nix's very idiosyncratic line ending choice
of "anything goes", making it very hard to calculate line/column
positions in the parser (while byte offsets are very easy).
this needs a string comparison because there seems to be no other way to
get that information out of bison. usually the location info is going to
be correct (pointing at a bad token), but since EOF isn't a token as
such it'll be wrong in that this case.
this hasn't shown up much so far because a single line ending *is* a
token, so any file formatted in the usual manner (ie, ending in a line
ending) would have its EOF position reported correctly.
the parser treats a plain \r as a newline, error reports do not. this
can lead to interesting divergences if anything makes use of this
feature, with error reports pointing to wrong locations in the input (or
even outside the input altogether).
previously we reported the error at the beginning of the binding
block (for plain inherits) or the beginning of the attr list (for
inherit-from), effectively hiding where exactly the error happened.
this also carries over to runtime positions of attributes in sets as
reported by unsafeGetAttrPos. we're not worried about this changing
observable eval behavior because it *is* marked unsafe, and the new
behavior is much more useful.
we already normalize attr order to lexicographic, doing the same for
formals makes sense. doubly so because the order of formals would
otherwise depend on the context of the expression, which is not quite as
useful as one might expect.
the parser modifies its inputs, which means that sharing them between
the error context reporting system and the parser itself can confuse the
reporting system. usually this led to early truncation of error context
reports which, while not dangerous, can be quite confusing.
* Convert all InputScheme::fetch() methods to getAccessor().
* Add checkLocks() method for checking lock attributes.
* Rename fetch() to fetchToStore().
This is the case for e.g. dirty Git workdirs, where we would get
$ nix flake metadata
Resolved URL: git+file:///home/eelco/Dev/nix-master
Locked URL: git+file:///home/eelco/Dev/nix-master
The "lockedRef" field is a misnomer, since it can be unlocked
(e.g. for a dirty Git workdir). In that case, `nix profile upgrade`
needs to assume that the package can have changed, and perform an
upgrade.
When reviewing old PRs, I found that #9997 adds some code to ensure one
particular assert is always present. But, removing asserts isn't
something we do in our own release builds either in the flake here or in
nixpkgs, and is plainly a bad idea that increases support burden,
especially if other distros make bad choices of build flags in their Nix
packaging.
For context, the assert macro in the C standard is defined to do nothing
if NDEBUG is set.
There is no way in our build system to set -DNDEBUG without manually
adding it to CFLAGS, so this is simply a configuration we do not use.
Let's ban it at compile time.
I put this preprocessor directive in src/libutil.cc because it is not
obvious where else to put it, and it seems like the most logical file
since you are not getting a usable nix without it.
Directly fail if a flakeref points to something that isn't a directory
instead of falling back to the logic of trying to look up the hierarchy
to find a valid flake root.
Fix https://github.com/NixOS/nix/issues/9868
It is possible to exfiltrate a file descriptor out of the build sandbox
of FODs, and use it to modify the store path after it has been
registered.
To avoid that issue, don't register the output of the build, but a copy
of it (that will be free of any leaked file descriptor).
Instead, serialize as NAR and send that over, then rehash sever side.
This is alorithmically simpler, but comes at the cost of a newer
parameter to `Store::addToStoreFromDump`.
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
Part of RFC 133
Extracted from our old IPFS branches.
Co-Authored-By: Matthew Bauer <mjbauer95@gmail.com>
Co-Authored-By: Carlo Nucera <carlo.nucera@protonmail.com>
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: Florian Klink <flokli@flokli.de>
desugaring inherit-from to syntactic duplication of the source expr also
duplicates side effects of the source expr (such as trace calls) and
expensive computations (such as derivationStrict).
Flakes still reside in the Nix store (so there shouldn't be any change
in behaviour), but they are now accessed via the rootFS
accessor. Since rootFS implements access checks, we no longer have to
worry about flake.{nix,lock} or their parents being symlinks that
escape from the flake.
Extracted from the lazy-trees branch.
"hash type" -> "hash algorithm" in all comments, documentation, and
messages.
ht -> ha, [Hh]ashType -> [HhashAlgo] for all local variables and
function arguments. No API change is made.
Continuation of 5334c9c792 and 837b889c41.
The sandbox rule `(allow network* (local ip))` doesn't do what it
implies. Adding this rule permits all network traffic. We should be
matching on (remote ip "localhost:*")` instead.
This seems to have found one actual bug in fs-sink.cc: the symlink case
was falling into the regular file case, which can't possibly be
intentional, right?
When a file conflict arises during a package install a suggestion is
made to remove the old entry. This was previously done using the
installable URLs of the old entry. These URLs are quite verbose and
often do not equal the URL of the existing entry.
This change uses the recently introduced profile entry name for the
suggestion, resulting in a simpler output.
The improvement is easily seen in the change to the functional test.
- `nix store add` supports text hashing
With functional test ensuring it matches `builtins.toFile`.
- Factored-out flags for both commands
- Move all common reusable flags to `libcmd`
- They are not part of the *definition* of the CLI infra, just a usag
of it.
- The `libstore` flag couldn't go in `args.hh` in libutil anyways,
would be awkward for it to live alone
- Shuffle around `Cmd*` hierarchy so flags for deprecated commands don't
end up on the new ones
This PR reduces the creation of short-lived basic_json objects while
parsing flake.lock files. For large flake.lock files (~1.5MB) I was
observing ~60s being spent for trivial nix build operations while
after this change it is now taking ~1.6s.
It's better to just check whether the input has all the attributes
needed to consider itself locked (e.g. whether a Git input has an
'rev' attribute).
Also, the 'locked' field was actually incorrect for Git inputs: it
would be set to true even for dirty worktrees. As a result, we got
away with using fetchTree() internally even though fetchTree()
requires a locked input in pure mode. In particular, this allowed
'--override-input' to work by accident.
The fix is to pass a set of "overrides" to call-flake.nix for all the
unlocked inputs (i.e. the top-level flake and any --override-inputs).
This fixes warnings like
warning: Ignoring setting 'auto-allocate-uids' because experimental feature 'auto-allocate-uids' is not enabled
warning: Ignoring setting 'impure-env' because experimental feature 'configurable-impure-env' is not enabled
when using the daemon and the user didn't actually set those settings.
Note: this also hides those settings from `nix config show`, but that
seems a good thing.
`canonPath` and `absPath` work on native paths, and so should switch
between supporting Unix paths and Windows paths accordingly.
The templating is because `CanonPath`, which shares the implementation,
should always be Unix style. It is the pure "nix-native" path type for
virtual file operations --- it is part of Nix's "business logic", and
should not vary with the host OS accordingly.
The core `CanonPath` constructors were using `absPath`, but `absPath` in
some situations does IO which is not appropriate. It turns out that
these constructors avoided those situations, and thus were pure, but it
was far from obvious this was the case.
To remedy the situation, abstract the core algorithm from `canonPath` to
use separately in `CanonPath` without any IO. No we know by-construction
that those constructors are pure.
That leaves `CanonPath::fromCWD` as the only operation which uses IO /
is impure. Add docs on it, and `CanonPath` as a whole, explaining the
situation.
This is also necessary to support Windows paths on windows without
messing up `CanonPath`. But, I think it is good even without that.
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
There is no longer an `importTarball` method. Instead, there is a
`unpackTarfileToSink` function (back in libutil). The caller can use
thisw with the `getParseSink` method we added in the last commit easily
enough.
In addition, tarball cache functionality is separated from `git-utils`
and moved into `tarball-cache`. This ensures we are separating mechanism
and policy.
There is now a separation of:
1. A `FileSystemObjectSink` for writing to git repos
2. Adapting libarchive to use that parse sink.
The prepares a proper separation of concerns.
A command like
rm -rf ~/.cache/nix/tarball-cache/ ~/.cache/nix/fetcher-cache-v1.sqlite*; nix flake metadata 'git+file:///home/eelco/Dev/nixpkgs?rev=9463103069725474698139ab10f17a9d125da859'
was spending about 84% of its runtime in lookup(), specifically in
git_tree_entry_bypath(). (The reading of blobs is less than 3%.)
It appears libgit2 doesn't do a lot of caching of trees, so we now
make sure that when we look up a path, we add all its parents, and all
the immediate children of the parents (since we have them in memory
anyway), to our own cache.
This speed up the command above from 17.2s to 7.8s on my machine.
Fixes (or at least should improve a lot) #9684.
Commit 83c067c0fa changed `builtins.pathExists`
to resolve symlinks before checking for existence. Consequently, if the path
refers to a symlink itself, existence of the target of the symlink (instead of
the symlink itself) was checked. Restore the previous behavior by skipping
symlink resolution in the last component.
No outward facing behavior is changed.
Older methods with same names that operate on on method + algo pair (for
old-style `<method>:algo`) are renamed to `*WithAlgo`.)
The functions are unit-tested in the same way the names for the hash
algorithms are tested.
* reword description of the `cores` setting
- be precise about the `builder` executable
- clearly distinguish between `builder` and job parallelism
- clarify the role of `mkDerivation` in the example
- remove prose for the default, it's shown programmatically
- mention relation to `max-jobs`
- move all reference documentation to the `builders` configuration setting
- reword documentation on machine specification, add examples
- disable showing the default value, as it rendered as `@/dummy/machines`, which is wrong
- highlight the examples
- link to the configuration docs for distributed builds
- builder -> build machine
Co-authored-by: Janik H <janik@aq0.de>
for plain inherits this is really just a stylistic choice, but for
inherit-from it actually fixes an exponential size increase problem
during expr printing (as may happen during assertion failure reporting,
on during duplicate attr detection in the parser)
this also has the effect of sorting let bindings lexicographically
rather than by symbol creation order as was previously done, giving a
better canonicalization in the process.
When I started contributing to Nix, I found the mix of definitions and
names in `fmt.hh` to be rather confusing, especially the small
difference between `hintfmt` and `hintformat`. I've renamed many classes
and added documentation to most definitions.
- `formatHelper` is no longer exported.
- `fmt`'s documentation is now with `fmt` rather than (misleadingly)
above `formatHelper`.
- `yellowtxt` is renamed to `Magenta`.
`yellowtxt` wraps its value with `ANSI_WARNING`, but `ANSI_WARNING`
has been equal to `ANSI_MAGENTA` for a long time. Now the name is
updated.
- `normaltxt` is renamed to `Uncolored`.
- `hintfmt` has been merged into `hintformat` as extra constructor
functions.
- `hintformat` has been renamed to `hintfmt`.
- The single-argument `hintformat(std::string)` constructor has been
renamed to a static member `hintformat::interpolate` to avoid pitfalls
with using user-generated strings as format strings.
As discussed in the last Nix team meeting (2024-02-95), this method
doesn't belong because `CanonPath` is a virtual/ideal absolute path
format, not used in file systems beyond the native OS format for which a
"current working directory" is defined.
Progress towards #9205
Pretty-print values in the REPL by printing each item in a list or
attrset on a separate line. When possible, single-item lists and
attrsets are printed on one line, as long as they don't contain a nested
list, attrset, or thunk.
Before:
```
{ attrs = { a = { b = { c = { }; }; }; }; list = [ 1 ]; list' = [ 1 2 3 ]; }
```
After:
```
{
attrs = {
a = {
b = {
c = { };
};
};
};
list = [ 1 ];
list' = [
1
2
3
];
}
```
Some tools which consume the "nix print-dev-env" rc script (such as
"nix-direnv") are sensitive to the use of unbound variables. They use
"set -u".
The "nix print-dev-env" rc script initially unsets "shellHook", then
loads variables from the derivation, and then evaluates "shellHook".
However, most derivations don't have a "shellHook" attribute.
So users get the error "shellHook: unbound variable". This can be
demonstrated with the command:
nix print-dev-env nixpkgs#hello | bash -u
This commit changes the rc script to provide an empty fallback value
for the "shellHook" variable.
Closes: #7951#8253
It is entirely possible for the path to be an empty string and many
unit tests actually pass it as an empty string (e.g. both_roundrip or
turnsEmptyPathIntoCWD). In this case, without this patch, absPath will
perform a one-byte out-of-bounds access.
This was discovered while enabling the nix test suite on Alpine where
we compile all software with `-D_GLIBCXX_ASSERTIONS=1`, thus resulting
in a test failure on Alpine.
While preparing PRs like #9753, I've had to change error messages in
dozens of code paths. It would be nice if instead of
EvalError("expected 'boolean' but found '%1%'", showType(v))
we could write
TypeError(v, "boolean")
or similar. Then, changing the error message could be a mechanical
refactor with the compiler pointing out places the constructor needs to
be changed, rather than the error-prone process of grepping through the
codebase. Structured errors would also help prevent the "same" error
from having multiple slightly different messages, and could be a first
step towards error codes / an error index.
This PR reworks the exception infrastructure in `libexpr` to
support exception types with different constructor signatures than
`BaseError`. Actually refactoring the exceptions to use structured data
will come in a future PR (this one is big enough already, as it has to
touch every exception in `libexpr`).
The core design is in `eval-error.hh`. Generally, errors like this:
state.error("'%s' is not a string", getAttrPathStr())
.debugThrow<TypeError>()
are transformed like this:
state.error<TypeError>("'%s' is not a string", getAttrPathStr())
.debugThrow()
The type annotation has moved from `ErrorBuilder::debugThrow` to
`EvalState::error`.
Previously, the "file:./" prefix was not correctly recognized in
fixGitURL; instead, it was mistaken as a file path, which resulted in a
parsed url of the form "file://file:./".
This commit fixes the issue by properly detecting the "file:" prefix.
Note, however, that unlike "file://", the "file:./" URI is _not_
standardized, but has been widely used to referred to relative file
paths. In particular, the "git+file:./" did work for nix<=2.18, and was
broken since nix 2.19.0.
Finally, this commit fixes the issue completely for the 2.19 series, but
is still inadequate for the 2.20 series due to new behaviors from the
switch to libgit2. However, it does improve the correctness of parsing
even though it is not yet a complete solution.
As discussed in the maintainer meeting on 2024-01-29.
Mainly this is to avoid a situation where the name is parsed and
treated as a file name, mostly to protect users.
.-* and ..-* are also considered invalid because they might strip
on that separator to remove versions. Doesn't really work, but that's
what we decided, and I won't argue with it, because .-* probably
doesn't seem to have a real world application anyway.
We do still permit a 1-character name that's just "-", which still
poses a similar risk in such a situation. We can't start disallowing
trailing -, because a non-zero number of users will need it and we've
seen how annoying and painful such a change is.
What matters most is preventing a situation where . or .. can be
injected, and to just get this done.
To quote the method doc:
Non-impure derivations can still behave impurely, to the degree permitted
by the sandbox. Hence why this method isn't `isPure`: impure derivations
are not the negation of pure derivations. Purity can not be ascertained
except by rather heavy tools.
The code works fine on macOS, but the default stack size we attempt to
set is larger than what my system will allow (Nix attempts to set the
stack size to 67108864, but the maximum allowed is 67092480), so I've
instead used the requested stack size or the maximum allowed, whichever
is smaller.
I've also added an error message if setting the stack size fails. It
looks like this:
> Failed to increase stack size from 8372224 to 67108864 (maximum
> allowed stack size: 67092480): Invalid argument
This extends the `error: cannot coerce a TYPE to a string` message
to print the value that could not be coerced. This helps with debugging
by making it easier to track down where the value is being produced
from, especially in errors with deep or unhelpful stack traces.
This is more conceptually correct (the order does not matter), and also
matches what Hydra already does.
(Nix and Hydra matching is needed for dedup
https://github.com/NixOS/hydra/issues/1164)
More invariants are enforced in the type, and less state needs to be
stored in the main sink itself. The method here is roughly that known as
"session types".
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
This avoids split-on-whitespace errors:
- No more `bash -c` needed
- No more `shellEscape` needed
- `remote-program` ssh store setting also cleanly supports args (e.g.
`nix daemon`)
- `ssh` uses `--` to separate args for SSH from args for the command to
run.
and will help with Hydra dedup.
Some code taken from #6628.
Co-Authored-By: Alexander Bantyev <balsoft@balsoft.ru>
Low-hanging fruit in the spirit of #9753 and #9754 (means 9999years did
all the hard work already).
This basically prints out what was attempted to be called as function,
i.e.
map (import <nixpkgs> {}) [ 1 2 3 ]
now gives the following error message:
error:
… while calling the 'map' builtin
at «string»:1:1:
1| map (import <nixpkgs> {}) [ 1 2 3 ]
| ^
… while evaluating the first argument passed to builtins.map
error: expected a function but found a set: { _type = "pkgs"; AAAAAASomeThingsFailToEvaluate = «thunk»; AMB-plugins = «thunk»; ArchiSteamFarm = «thunk»; BeatSaberModManager = «thunk»; CHOWTapeModel = «thunk»; ChowCentaur = «thunk»; ChowKick = «thunk»; ChowPhaser = «thunk»; CoinMP = «thunk»; «18783 attributes elided»}
Factor out `ServeProto::BasicClientConnection` for Hydra to share
- `queryValidPaths`: Hydra uses the lock argument differently than Nix,
so we un-hard-code it.
- `buildDerivationRequest`: Just the request half, as Hydra does some
things between requesting and responding.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Do this if we want to do `--hash-algo` everywhere, and not `--algo` for
hash commands.
The new `nix hash convert` is updated. Deprecated new CLI commands are
left as-is (`nix hash path` needs to be redone and is also left as-is).
Good to document these formats separately from commands that happen to
use them.
Eventually I would like this and `builtins.derivation` to refer to a
store section on derivations that is authoritative, but that doesn't yet
exist, and will take some time to make. So I think we're just best off
merging this now as is.
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
Return a value instead of throwing.
Rather than the more trivial refactor of wrapping the return value in
another std::optional, we retain the meaning of the outer optional:
"we know at least something."
So we have changed:
return nullopt -> return nullopt
throw InvalidPath -> return make_optional(nullptr)
return vpi -> return make_optional(vpi)
Add several tests for git fetching:
- shallow-cache-separation: can fetch the same repo shallowly and non-shallowly
- shallow-ignore-ref: ensure that ref gets ignored when shallow=true is set
- ssh-shallow: can fetch a git repo via ssh using shallow=1
libgit2 is not capable of using git-credentials helpers yet.
This prevents private repositories from being used.
Based on code that was replaced in https://github.com/NixOS/nix/pull/9240
(Introduce libgit2); hence:
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
In rare cases (e.g. when using allowSubstitutes = false), it's
possible that we simultaneously have a DerivationGoal *and* a
SubstitutionGoal building the same path. So if a DerivationGoal
already built the path while the SubstitutionGoal was waiting for a
download slot, it saves us a superfluous download to exit early.
In the "discard" case (i.e. when the store path already exists
locally), when we call parseDump() from a Finally and it throws an
exception (e.g. if the download of the NAR fails), Nix crashes:
terminate called after throwing an instance of 'nix::SubstituteGone'
what(): error: file 'nar/06br3254rx4gz4cvjzxlv028jrx80zg5i4jr62vjmn416dqihgr7.nar.xz' does not exist in binary cache 'http://localhost'
Aborted (core dumped)
Instead of having it be the default method in `Store` itself, have it be
the implementation in `DummyStore` and `LegacySSHStore`. Then just the
implementations which fail to provide the method pay the "penalty" of
dealing with the icky `unimplemented` function for non-compliance.
Picks up where #8217. Getting close to no `unsupported` in the `Store`
interface itself!
More progress on issue #5729.
It is good to propagate the underlying error so whether or not we use a
process to deal with path length issues is not observable.
Also, as these wrapper functions got more and more complex, the code
duplication got worse and worse. The new `bindConnectProcHelper`
function deduplicates them.
This is useful for determining quickly which substituters to query.
An alternative would be for users to invoke the narinfo cache db directly,
so why do we need this change?
- It is easier to use. I believe Nix itself should also use it.
- This way, the narinfo cache db remains an implementation detail.
- Callers get to use the in-memory cache as well.
This does not yet resolve the coupling between packages and
derivations, but it makes the code more consistent with the
terminology, and it accentuates places where the coupling is
obvious, such as
auto drvPath = packageInfo.queryDrvPath();
if (!drvPath)
throw Error("'%s' is not a derivation", what());
... which isn't wrong, and in my opinion, doesn't even look
wrong, because it just reflects the current logic.
However, I do like that we can now start to see in the code that
this coupling is perhaps a bit arbitrary.
After this rename, we can bring the DerivingPath concept into type
and start to lift this limitation.
these symbols are used a *lot*, so it makes sense to cache them. this
mostly increases clarity of the code (however clear one may wish to call
the parser desugaring here), but it also provides a small performance
benefit.
there's no reason the parser itself should be doing semantic analysis
like bindVars. split this bit apart (retaining the previous name in
EvalState) and have the parser really do *only* parsing, decoupled from
EvalState.
most EvalState and Expr members defined here could be elsewhere, where
they'd be easier to maintain (not being embedded in a file with arcane
syntax) and *somewhat* more faithfully placed according to the path of
the file they're defined in.
most instances of this being used do not refer to the "current"
position, sometimes not even to one reasonably close by. it could also
be called `makePos` instead, but `at` seems clear in context.
ParserState better describes what this struct really is. the parser
really does modify its state (most notably position and symbol tables),
so calling it that rather than obliquely "data" (which implies being
input only) makes sense.
since nix doesn't use the bison `error` terminal anywhere any invocation
of yyerror will immediately cause a failure. since we're *already*
leaking tons of memory whatever little bit bison allocates internally
doesn't much matter any more, and we'll be replacing the parser soon anyway.
coincidentally this now also matches the error behavior of URIs when
they are disabled or ~/ paths in pure eval mode, duplicate attr
detection etc.
The data was (accidentally?) copied into a std::string,
even though the string is immediately converted into a std::string_view.
The code has been changed to construct a std::string_view directly,
such that one copy less happens.
`FLOAT`, `INT`, and `IN` are identifers taken by macros.
The name `IN_KW` is chosen to match `OR_KW`, which is presumably named
that way for the same reason of dodging macros.
Most of this is a `catch SysError` -> `catch SystemError` sed. This
is a rather pure-churn change I would like to get out of the way. **The
intersting part is `src/libutil/error.hh`.**
On Unix, we will only throw the `SysError` concrete class, which has
the same constructors that `SystemError` used to have.
On Windows, we will throw `WinError` *and* `SysError`. `WinError`
(which will be created in a later PR), will use a `DWORD` instead of
`int` error value, and `GetLastError()`, which is the Windows equivalent
of the `errno` machinery. Windows will *also* use `SysError` because
Window's "libc" (MSVCRT) implements the POSIX interface, and we use it
too.
As the docs describe, while we *throw* one of the 3 choices above (2
concrete classes or the alias), we should always *catch* `SystemError`.
This ensures no matter how the implementation changes for Windows (e.g.
between `SysError` and `WinError`) the catching logic stays the same
and stays correct.
Co-Authored-By volth <volth@volth.com>
Co-Authored-By Eugene Butler <eugene@eugene4.com>
When returning a 0-length substring, avoid calling coerceToString,
since it returns a string_view with the string's length, which is
expensive to compute for large strings.
Also fingerprint and some preparatory improvements.
Testing is still not up to scratch because lots of logic is duplicated
between the workdir and commit cases.
Enabled for fetchGit, which historically had this behavior,
among other behaviors we do not want in fetchGit.
fetchTree disables this parameter by default. It can choose the
simpler behavior, as it is still experimental.
I am not confident that the filtering implementation is future
proof. It should reuse a source filtering wrapper, which I believe
Eelco has already written, but not merged yet.
The Nix team has requested that this output format remain unchanged.
I've added a warning to the man page explaining that `nix-instantiate
--eval` output will not parse correctly in many situations.
Previously, there were two mostly-identical value printers -- one in
`libexpr/eval.cc` (which didn't force values) and one in
`libcmd/repl.cc` (which did force values and also printed ANSI color
codes).
This PR unifies both of these printers into `print.cc` and provides a
`PrintOptions` struct for controlling the output, which allows for
toggling whether values are forced, whether repeated values are tracked,
and whether ANSI color codes are displayed.
Additionally, `PrintOptions` allows tuning the maximum number of
attributes, list items, and bytes in a string that will be displayed;
this makes it ideal for contexts where printing too much output (e.g.
all of Nixpkgs) is distracting. (As requested by @roberth in
https://github.com/NixOS/nix/pull/9554#issuecomment-1845095735)
Please read the tests for example output.
Future work:
- It would be nice to provide this function as a builtin, perhaps
`builtins.toStringDebug` -- a printing function that never fails would
be useful when debugging Nix code.
- It would be nice to support customizing `PrintOptions` members on the
command line, e.g. `--option to-string-max-attrs 1000`.
Changes:
- CPP variable is now `USE_READLINE` not `READLINE`
- `configure.ac` supports with new CLI flag
- `package.nix` supports with new configuration option
- `flake.nix` CIs this (along with no markdown)
Remove old Ubuntu 16.04 stop-gap too, as that is now quite old.
Motivation:
- editline does not build for Windows, but readline *should*. (I am
still working on this in Nixpkgs at this time, however. So there will
be a follow-up Nix PR removing the windows-only skipping of the
readline library once I am done.)
- Per
https://salsa.debian.org/debian/nix/-/blob/master/debian/rules?ref_type=heads#L27
and #2551, Debian builds Nix with readline. Now we better support and
CI that build configuration.
This is picking up where #2551 left off, ensuring we test a few more
things not merely have CPP for them.
Co-authored-by: Weijia Wang <9713184+wegank@users.noreply.github.com>
Also move `SourcePath` into `libutil`.
These changes allow `error.hh` and `error.cc` to access source path and
position information, which we can use to produce better error messages
(for example, we could consider omitting filenames when two or more
consecutive stack frames originate from the same file).
This sets up infrastructure in libutil to allow for signing other than
by a secret key in memory. #9076 uses this to implement remote signing.
(Split from that PR to allow reviewing in smaller chunks.)
Co-Authored-By: Raito Bezarius <masterancpp@gmail.com>
This avoids a Value allocation for empty list constants. During a `nix
search nixpkgs`, about 82% of all thunked lists are empty, so this
removes about 3 million Value allocations.
Performance comparison on `nix search github:NixOS/nixpkgs/e1fa12d4f6c6fe19ccb59cac54b5b3f25e160870 --no-eval-cache`:
maximum RSS: median = 3845432.0000 mean = 3845432.0000 stddev = 0.0000 min = 3845432.0000 max = 3845432.0000 [rejected?, p=0.00000, Δ=-70084.00000±0.00000]
soft page faults: median = 965395.0000 mean = 965394.6667 stddev = 1.1181 min = 965392.0000 max = 965396.0000 [rejected?, p=0.00000, Δ=-17929.77778±38.59610]
system CPU time: median = 1.8029 mean = 1.7702 stddev = 0.0621 min = 1.6749 max = 1.8417 [rejected, p=0.00064, Δ=-0.12873±0.09905]
user CPU time: median = 14.1022 mean = 14.0633 stddev = 0.1869 min = 13.8118 max = 14.3190 [not rejected, p=0.03006, Δ=-0.18248±0.24928]
elapsed time: median = 15.8205 mean = 15.8618 stddev = 0.2312 min = 15.5033 max = 16.1670 [not rejected, p=0.00558, Δ=-0.28963±0.29434]
since `up` and `values` are both pointer-aligned the type field will
also be pointer-aligned, wasting 48 bits of space on most machines. we
can get away with removing the type field altogether by encoding some
information into the `with` expr that created the env to begin with,
reducing the GC load for the absolutely massive amount of single-entry
envs we create for lambdas. this reduces memory usage of system eval by
quite a bit (reducing heap size of our system eval from 8.4GB to 8.23GB)
and gives similar savings in eval time.
running `nix eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'`
before:
Time (mean ± σ): 5.576 s ± 0.003 s [User: 5.197 s, System: 0.378 s]
Range (min … max): 5.572 s … 5.581 s 10 runs
after:
Time (mean ± σ): 5.408 s ± 0.002 s [User: 5.019 s, System: 0.388 s]
Range (min … max): 5.405 s … 5.411 s 10 runs
many paths need not be heap-allocated, and derivation env name/valye
pairs can be moved into the map.
before:
Benchmark 1: nix eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
Time (mean ± σ): 6.883 s ± 0.016 s [User: 5.250 s, System: 1.424 s]
Range (min … max): 6.860 s … 6.905 s 10 runs
after:
Benchmark 1: nix eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
Time (mean ± σ): 6.868 s ± 0.027 s [User: 5.194 s, System: 1.466 s]
Range (min … max): 6.828 s … 6.913 s 10 runs
the table is very small compared to cache sizes and a single indexed
load is faster than three comparisons.
before:
Benchmark 1: nix eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
Time (mean ± σ): 6.907 s ± 0.012 s [User: 5.272 s, System: 1.429 s]
Range (min … max): 6.893 s … 6.926 s 10 runs
after:
Benchmark 1: nix eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
Time (mean ± σ): 6.883 s ± 0.016 s [User: 5.250 s, System: 1.424 s]
Range (min … max): 6.860 s … 6.905 s 10 runs
a bunch of derivation strings contain no escape sequences. we can
optimize for this fact by first scanning for the end of a derivation
string and simply returning the contents unmodified if no escape
sequences were found. to make this even more efficient we can also use
BackedStringViews to avoid copies, avoiding heap allocations for
transient data.
before:
Benchmark 1: nix eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
Time (mean ± σ): 6.952 s ± 0.015 s [User: 5.294 s, System: 1.452 s]
Range (min … max): 6.926 s … 6.974 s 10 runs
after:
Benchmark 1: nix eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
Time (mean ± σ): 6.907 s ± 0.012 s [User: 5.272 s, System: 1.429 s]
Range (min … max): 6.893 s … 6.926 s 10 runs
This fixes a segfault on infinite function call recursion (rather than
infinite thunk recursion) by tracking the function call depth in
`EvalState`.
Additionally, to avoid printing extremely long stack traces, stack
frames are now deduplicated, with a `(19997 duplicate traces omitted)`
message. This should only really be triggered in infinite recursion
scenarios.
Before:
$ nix-instantiate --eval --expr '(x: x x) (x: x x)'
Segmentation fault: 11
After:
$ nix-instantiate --eval --expr '(x: x x) (x: x x)'
error: stack overflow
at «string»:1:14:
1| (x: x x) (x: x x)
| ^
$ nix-instantiate --eval --expr '(x: x x) (x: x x)' --show-trace
error:
… from call site
at «string»:1:1:
1| (x: x x) (x: x x)
| ^
… while calling anonymous lambda
at «string»:1:2:
1| (x: x x) (x: x x)
| ^
… from call site
at «string»:1:5:
1| (x: x x) (x: x x)
| ^
… while calling anonymous lambda
at «string»:1:11:
1| (x: x x) (x: x x)
| ^
… from call site
at «string»:1:14:
1| (x: x x) (x: x x)
| ^
(19997 duplicate traces omitted)
error: stack overflow
at «string»:1:14:
1| (x: x x) (x: x x)
| ^
more buffers that can be uninitialized and on the stack. small
difference, but still worth doing.
before:
Benchmark 1: nix eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
Time (mean ± σ): 6.963 s ± 0.011 s [User: 5.330 s, System: 1.421 s]
Range (min … max): 6.943 s … 6.974 s 10 runs
after:
Benchmark 1: nix eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
Time (mean ± σ): 6.952 s ± 0.015 s [User: 5.294 s, System: 1.452 s]
Range (min … max): 6.926 s … 6.974 s 10 runs
istream sentry objects are very expensive for single-character
operations, and since we don't configure exception masks for the
istreams used here they don't even do anything. all we need is
end-of-string checks and an advancing position in an immutable memory
buffer, both of which can be had for much cheaper than istreams allow.
the effect of this change is most apparent on empty stores.
before:
Benchmark 1: nix eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
Time (mean ± σ): 7.167 s ± 0.013 s [User: 5.528 s, System: 1.431 s]
Range (min … max): 7.147 s … 7.182 s 10 runs
after:
Benchmark 1: nix eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
Time (mean ± σ): 6.963 s ± 0.011 s [User: 5.330 s, System: 1.421 s]
Range (min … max): 6.943 s … 6.974 s 10 runs
Previously, IFDs would be built within the eval store, even though one
is typically using `--eval-store` precisely to *avoid* local builds.
Because the resulting Nix expression must be copied back to the eval
store in order to be imported, this requires the eval store to trust
the build store's signatures.
The profile manifest is now an object keyed on the name returned by
getNameFromURL() at installation time, instead of an array. This
ensures that the names of profile elements don't change when other
elements are added/removed.
Prior to this change, Nix would prepend every installable to the PATH
list in order to ensure that installables appeared before the current
PATH from the ambient environment.
With this change, all the installables are still prepended to the PATH,
but in the same order as they appear on the command line. This means
that the first of two packages that expose an executable `hello` would
appear in the PATH first, and thus be executed first.
See the test in the prior commit for a more concrete example.
There's no good reason to deprecate it:
- For consistency reasons it should continue to exist, such that all
primitive types have a corresponding `builtins.is*` primop.
- There's no implementation cost to continuing to have this function
- It costs users time to try to migrate away from it, e.g.
https://github.com/NixOS/nixpkgs/pull/219747 and https://github.com/NixOS/nixpkgs/pull/275548
- Using it can give easier-to-read code like `all isNull list`
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
this also reduces forceValue code size and removes the need for
hideInDiagnostics. coopting thunk forcing like this has the additional
benefit of clarifying how these errors can happen in the first place.
forceValue is extremely hot. interestingly adding likeliness annotations
to the branches does not seem to make a difference.
before:
Time (mean ± σ): 4.224 s ± 0.005 s [User: 3.711 s, System: 0.512 s]
Range (min … max): 4.218 s … 4.234 s 10 runs
after:
Time (mean ± σ): 4.140 s ± 0.009 s [User: 3.647 s, System: 0.492 s]
Range (min … max): 4.130 s … 4.152 s 10 runs
almost all uses of this are interactive, except for deepSeq. deepSeq is
going to be expensive and rare enough to not care much about, and
Value::determinePos should usually be cheap enough to not be too much of
a burden in any case.
~1% parser speedup from not using TLS indirections, less on system eval.
this could have also gone in flex yyextra data, but that's significantly
slower for some reason (albeit still faster than thread locals).
before:
Time (mean ± σ): 4.231 s ± 0.004 s [User: 3.725 s, System: 0.504 s]
Range (min … max): 4.226 s … 4.240 s 10 runs
after:
Time (mean ± σ): 4.224 s ± 0.005 s [User: 3.711 s, System: 0.512 s]
Range (min … max): 4.218 s … 4.234 s 10 runs
~2% speedup on parsing without eval, less (but still significant) on
system eval. having flex generate faster parsers leads to very strange
misparses. maybe re2c is worth investigating.
before:
Time (mean ± σ): 4.260 s ± 0.003 s [User: 3.754 s, System: 0.505 s]
Range (min … max): 4.257 s … 4.266 s 10 runs
after:
Time (mean ± σ): 4.231 s ± 0.004 s [User: 3.725 s, System: 0.504 s]
Range (min … max): 4.226 s … 4.240 s 10 runs
as written the comparisons generate copies, even though it looks as
though they shouldn't.
before:
Time (mean ± σ): 4.396 s ± 0.002 s [User: 3.894 s, System: 0.501 s]
Range (min … max): 4.393 s … 4.399 s 10 runs
after:
Time (mean ± σ): 4.260 s ± 0.003 s [User: 3.754 s, System: 0.505 s]
Range (min … max): 4.257 s … 4.266 s 10 runs
checking for isBlackhole in the forceValue hot path is rather more
expensive than necessary, and with a little bit of trickery we can move
such handling into the isApp case. small performance benefit, but under
some circumstances we've seen 2% improvement as well.
〉 nix eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
before:
Time (mean ± σ): 4.429 s ± 0.002 s [User: 3.929 s, System: 0.500 s]
Range (min … max): 4.427 s … 4.433 s 10 runs
after:
Time (mean ± σ): 4.396 s ± 0.002 s [User: 3.894 s, System: 0.501 s]
Range (min … max): 4.393 s … 4.399 s 10 runs
resizing a std::string clears the newly added bytes, which is not
necessary here and comes with a ~1.4% slowdown on our test nixos config.
〉 nix eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
before:
Time (mean ± σ): 4.486 s ± 0.003 s [User: 3.978 s, System: 0.507 s]
Range (min … max): 4.482 s … 4.492 s 10 runs
after:
Time (mean ± σ): 4.429 s ± 0.002 s [User: 3.929 s, System: 0.500 s]
Range (min … max): 4.427 s … 4.433 s 10 runs
This keeps hint messages, source location information, and source code
snippets grouped together, while making stack traces shorter (so that
more stack frames can be viewed on the same terminal).
Before:
error:
… while evaluating the attribute 'body'
at /Users/wiggles/nix/tests/functional/lang/eval-fail-assert.nix:4:3:
3|
4| body = x "x";
| ^
5| }
… from call site
at /Users/wiggles/nix/tests/functional/lang/eval-fail-assert.nix:4:10:
3|
4| body = x "x";
| ^
5| }
… while calling 'x'
at /Users/wiggles/nix/tests/functional/lang/eval-fail-assert.nix:2:7:
1| let {
2| x = arg: assert arg == "y"; 123;
| ^
3|
error: assertion '(arg == "y")' failed
at /Users/wiggles/nix/tests/functional/lang/eval-fail-assert.nix:2:12:
1| let {
2| x = arg: assert arg == "y"; 123;
| ^
3|
After:
error:
… while evaluating the attribute 'body'
at /Users/wiggles/nix/tests/functional/lang/eval-fail-assert.nix:4:3:
3|
4| body = x "x";
| ^
5| }
… from call site
at /Users/wiggles/nix/tests/functional/lang/eval-fail-assert.nix:4:10:
3|
4| body = x "x";
| ^
5| }
… while calling 'x'
at /Users/wiggles/nix/tests/functional/lang/eval-fail-assert.nix:2:7:
1| let {
2| x = arg: assert arg == "y"; 123;
| ^
3|
error: assertion '(arg == "y")' failed
at /Users/wiggles/nix/tests/functional/lang/eval-fail-assert.nix:2:12:
1| let {
2| x = arg: assert arg == "y"; 123;
| ^
3|
`eval-system` option overrides just the value of `builtins.currentSystem`.
This is more useful than overriding `system` since you can build these
derivations on remote builders which can work on the given system.
Co-authored-by: John Ericson <John.Ericson@Obsidian.Systems>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
I wrote the `configure.ac` wrong, and so we just got no builds
supporting ACLs.
Also, it needs to be more precise because Darwin puts other stuff in
that same header, evidently.
I don't love the way this code looks. There are two larger problems:
- eval, build/scratch, destination stores (#5025) should have different
types to reflect the fact that they are used for different purposes
and those purposes correspond to different operations. It should be
impossible to "use the wrong store" in my cases.
- Since drvs can end up in both the eval and build/scratch store, we
should have some sort of union/layered store (not on the file sytem
level, just conceptual level) that allows accessing both. This would
get rid of the ugly "check both" boilerplate in this PR.
Still, it might be better to land this now / soon after minimal cleanup,
so we have a concrete idea of what problem better abstractions are
supposed to solve.
Below the comment added by this commit is a much longer comment
followed by a trust check, both of which have confused me on at
least two occasions. I figured it out once, forgot it, then had to
ask @Ericson2314 to explain it, at which point I understood it
again. I think this might confuse other people too, or maybe I will
just forget it a third time. So let's add a comment.
Farther down in the function is the following check:
```
if (!(drvType.isCA() || trusted))
throw Error("you are not privileged to build input-addressed derivations");
```
This seems really strange at first. A key property of Nix is that
you can compute the outpath of a derivation using the derivation
(and its references-closure) without trusting anybody!
The missing insight is that at this point in the code the builder
doesn't necessarily have the references-closure of the derivation
being built, and therefore needs to trust that the derivation's
outPath is honest. It's incredibly easy to overlook this, because
the only difference between these two cases is which of these
identically-named functions we used:
- `readDerivation(Source,Store)`
- `Store::readDerivation()`
These functions have different trust models (except in the special
case where the first function is used on the local store). We
should call the reader's attention to this fact.
Co-authored-by: Cole Helbling <cole.e.helbling@outlook.com>
In https://github.com/NixOS/nix/pull/6134#issuecomment-1079199888,
@thuffschmitt proposed exposing `LegacySSHStore` in Nix for
deduplication with Hydra, at least temporarily. I think that is a good
idea.
Note that the diff will look bad unless one ignores whitespace! Also try
this locally:
```shell-session
git diff --ignore-all-space HEAD^:src/libstore/legacy-ssh-store.cc HEAD:src/libstore/legacy-ssh-store.cc
git diff --ignore-all-space HEAD^:src/libstore/legacy-ssh-store.cc HEAD:src/libstore/legacy-ssh-store.hh
```
* document `fetchTree`
* display experimental feature note at the top
we have to enable the new `fetchTree` experimental feature to render it
at all. this was a bug introduced when adding that new feature flag.
Co-authored-by: tomberek <tomberek@users.noreply.github.com>
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: Silvan Mosberger <github@infinisil.com>
The code has already been fixed (yay!) so what is left of this commit is
just updating the API docs.
Co-authored-by: Cole Helbling <cole.e.helbling@outlook.com>
According https://en.cppreference.com/w/cpp/io/strstream, it has been
deprecated since C++98! The Clang + Linux build systems to not have it
at all, or at least be hiding it.
We can just use `std::stringstream` instead, I think.
* Print the value in `error: cannot coerce` messages
This extends the `error: cannot coerce a TYPE to a string` message
to print the value that could not be coerced. This helps with debugging
by making it easier to track down where the value is being produced
from, especially in errors with deep or unhelpful stack traces.
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
This is needed for building CA deriations with a src store / dest store
split. In particular it is needed for Hydra.
https://github.com/NixOS/hydra/issues/838 currently puts realizations,
and thus build outputs, in the local store, but it should not.
This includes position information in more places, making debugging
easier.
Before:
```
$ nix-instantiate --show-trace --eval tests/functional/lang/eval-fail-using-set-as-attr-name.nix
error:
… while evaluating an attribute name
at «none»:0: (source not available)
error: value is a set while a string was expected
```
After:
```
error:
… while evaluating an attribute name
at /pwd/lang/eval-fail-using-set-as-attr-name.nix:5:10:
4| in
5| attr.${key}
| ^
6|
error: value is a set while a string was expected
```
In the process, partially undo e89b5bd0bf
in that the ancient < 2.4 version is now supported again by the
serializer again. `LegacySSHStore`, instead of also asserting that the
version is at least 4, just checks that `narHash` is set.
This allows us to better test the serializer in isolation for both
versions (< 4 and >= 4).
AppleDouble files were extracted differently on macOS machines than on other
UNIX's.
Setting `archive_read_set_format_option(this->archive, NULL ,"mac-ext",NULL)`
fixes this problem, since it just ignores the AppleDouble file and treats it as
a normal one.
This was a problem since it caused source archives to be different between macOS
and Linux.
Ref: nixos/nix#9290
* Factor out the default `MultiCommand` behavior
All the `MultiCommand`s had (nearly) the same behavior when called
without a subcommand.
Factor out this behavior into the `NixMultiCommand` class.
* Display the list of available subcommands when none is specified
Whenever a user runs a command that excepts a subcommand, add the list
of available subcommands to the error message.
* Print the multi-command lists as Markdown lists
This takes more screen real estate, but is also much more readable than
a comma-separated list
without knowing a lot of context, it's not clear who "we" are in that
text. I'm also strongly opposed to adding procedural notes into
a reference manual; it just won't age well.
this change leaves a factual description of the experimental feature and
its purpose.
- remove prose for the default value, which is shown programmatically
- add note on how this relates to `cores`
- add link to mentioned derivation attribute
Today, with the tests inside a `tests` intermingled with the
corresponding library's source code, we have a few problems:
- We have to be careful that wildcards don't end up with tests being
built as part of Nix proper, or test headers being installed as part
of Nix proper.
- Tests in libraries but not executables is not right:
- It means each executable runs the previous unit tests again, because
it needs the libraries.
- It doesn't work right on Windows, which doesn't want you to load a
DLL just for the side global variable . It could be made to work
with the dlopen equivalent, but that's gross!
This reorg solves these problems.
There is a remaining problem which is that sibbling headers (like
`hash.hh` the test header vs `hash.hh` the main `libnixutil` header) end
up shadowing each other. This PR doesn't solve that. That is left as
future work for a future PR.
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
This makes for more useful manual table of contents, that displays the
information at a glance.
The `nix help-stores` command is kept as-is, even though it will show up
in the manual with the same information as these pages due to the way it
is written as a "`--help`-style" command. Deciding what to do with that
command is left for a later PR.
This change also lists all store types at the top of the respective overview page.
Co-authored-by: John Ericson <John.Ericson@Obsidian.Systems
- helps navigating the code as it highlights which files are generated
- makes it less error prone when working incrementally
(although this should be just fixed by building out of tree)
This uses `git check-ignore` to determine if files are ignored before
attempting to add them in `putFile`.
We also add a condition to the `fetchFromWorkdir` filter to always add
the `flake.lock` file, even if it's not tracked. This is necessary to
resolve inputs.
This fixes#8854 without `git add --force`.
The problem was that f880469173 forgot
that the `#include <sys/xattr.h>` was guarded by an `#ifdef __linux__`.
However, the build failure was only on FreeBSD --- turns out other
platforms have this header too!
The fix therefore uses a new configure check so we properly clear ACLs
on more platforms.
This allows templates such as `NLOHMANN_DEFINE_TYPE_*` templates and other generators with things like `std::vector<std::optional<T>>`.
Co-authored-by: John Ericson <John.Ericson@Obsidian.Systems>
`installcheck` doesn't yet work, but the rest of the build can now
happen mostly inside a separate build directory.
Progress on #9342
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
GitArchiveInputScheme now streams tarballs into a Git repository. This
deduplicates data a lot, e.g. when you're fetching different revisions
of the Nixpkgs repo. It also warns if the tree hash returned by GitHub
doesn't match the tree hash of the imported tarball.
When writing a shebang script, you expect your path to be relative to
the script, not the cwd. We previously handled this correctly for
relative file paths, but not for expressions.
This handles both -p & -E args. My understanding is this should be
what we want in any cases I can think of - people run scripts from
many different working directories. @edolstra is there any reason to
handle -p args differently in this case?
Fixes#4232
In commit 0d2163c6dc, the progress bar was hidden
in nix repl because of a regression that caused it to interfere with user
input. Several users like(d) seeing the progress bar in the repl during builds.
Only hiding it while waiting for user input gives us the best of both worlds,
so do just that.
Without the change build for `eval.o` fails occasionally as:
$ make src/libexpr/eval.o
GEN Makefile.config
GEN src/libexpr/primops/derivation.nix.gen.hh
GEN src/libexpr/fetchurl.nix.gen.hh
GEN src/libexpr/parser-tab.cc
GEN src/libexpr/lexer-tab.cc
src/libexpr/lexer.l:314: warning, -s option given but default rule can be matched
CXX src/libexpr/eval.o
src/libexpr/eval.cc:519:18: fatal error: flake/call-flake.nix.gen.hh: No such file or directory
519 | #include "flake/call-flake.nix.gen.hh"
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make: *** [mk/patterns.mk:3: src/libexpr/eval.o] Error 1
Noticed in https://github.com/NixOS/nixpkgs/pull/269439
This builds on #8817, to add additional UX help for people with existing
muscle memory (or shell history) with --update-input and tries to gently
guide them towards the newly evolved CLI UI.
Co-authored-by: Cole Helbling <cole.e.helbling@outlook.com>
