mirror of
https://github.com/privatevoid-net/nix-super.git
synced 2024-11-15 18:56:16 +02:00
f34b8de5b2
This requires `--substitute-on-destination` if you want the remote side to substitute instead of copying if possible. For completeness sake, document it here. Also, the stable Nix from nixpkgs is still 2.18, so more folks may stumble upon this when this is bumped, so I'd expect this to be actually useful. Closes #10182
207 lines
9 KiB
Markdown
207 lines
9 KiB
Markdown
# Release 2.20.0 (2024-01-29)
|
|
|
|
- Option `allowed-uris` can now match whole schemes in URIs without slashes [#9547](https://github.com/NixOS/nix/pull/9547)
|
|
|
|
If a scheme, such as `github:` is specified in the `allowed-uris` option, all URIs starting with `github:` are allowed.
|
|
Previously this only worked for schemes whose URIs used the `://` syntax.
|
|
|
|
- Include cgroup stats when building through the daemon [#9598](https://github.com/NixOS/nix/pull/9598)
|
|
|
|
Nix now also reports cgroup statistics when building through the Nix daemon and when doing remote builds using `ssh-ng`,
|
|
if both sides of the connection are using Nix 2.20 or newer.
|
|
|
|
- Disallow empty search regex in `nix search` [#9481](https://github.com/NixOS/nix/pull/9481)
|
|
|
|
[`nix search`](@docroot@/command-ref/new-cli/nix3-search.md) now requires a search regex to be passed. To show all packages, use `^`.
|
|
|
|
- Add new `eval-system` setting [#4093](https://github.com/NixOS/nix/pull/4093)
|
|
|
|
Add a new `eval-system` option.
|
|
Unlike `system`, it just overrides the value of `builtins.currentSystem`.
|
|
This is more useful than overriding `system`, because you can build these derivations on remote builders which can work on the given system.
|
|
In contrast, `system` also affects scheduling which will cause Nix to build those derivations locally even if that doesn't make sense.
|
|
|
|
`eval-system` only takes effect if it is non-empty.
|
|
If empty (the default) `system` is used as before, so there is no breakage.
|
|
|
|
- Import-from-derivation builds the derivation in the build store [#9661](https://github.com/NixOS/nix/pull/9661)
|
|
|
|
When using `--eval-store`, `import`ing from a derivation will now result in the derivation being built on the build store, i.e. the store specified in the `store` Nix option.
|
|
|
|
Because the resulting Nix expression must be copied back to the evaluation store in order to be imported, this requires the evaluation store to trust the build store's signatures.
|
|
|
|
- Mounted SSH Store [#7890](https://github.com/NixOS/nix/issues/7890) [#7912](https://github.com/NixOS/nix/pull/7912)
|
|
|
|
Introduced the store [`mounted-ssh-ng://`](@docroot@/command-ref/new-cli/nix3-help-stores.md).
|
|
This store allows full access to a Nix store on a remote machine and additionally requires that the store be mounted in the local filesystem.
|
|
|
|
- Rename `nix show-config` to `nix config show` [#7672](https://github.com/NixOS/nix/issues/7672) [#9477](https://github.com/NixOS/nix/pull/9477)
|
|
|
|
`nix show-config` was renamed to `nix config show`, and `nix doctor` was renamed to `nix config check`, to be more consistent with the rest of the command line interface.
|
|
|
|
- Add command `nix hash convert` [#9452](https://github.com/NixOS/nix/pull/9452)
|
|
|
|
This replaces the old `nix hash to-*` commands, which are still available but will emit a deprecation warning. Please convert as follows:
|
|
|
|
- `nix hash to-base16 $hash1 $hash2`: Use `nix hash convert --to base16 $hash1 $hash2` instead.
|
|
- `nix hash to-base32 $hash1 $hash2`: Use `nix hash convert --to nix32 $hash1 $hash2` instead.
|
|
- `nix hash to-base64 $hash1 $hash2`: Use `nix hash convert --to base64 $hash1 $hash2` instead.
|
|
- `nix hash to-sri $hash1 $hash2`: : Use `nix hash convert --to sri $hash1 $hash2` or even just `nix hash convert $hash1 $hash2` instead.
|
|
|
|
- Rename hash format `base32` to `nix32` [#9452](https://github.com/NixOS/nix/pull/9452)
|
|
|
|
Hash format `base32` was renamed to `nix32` since it used a special Nix-specific character set for
|
|
[Base32](https://en.wikipedia.org/wiki/Base32).
|
|
|
|
- `nix profile` now allows referring to elements by human-readable names [#8678](https://github.com/NixOS/nix/pull/8678)
|
|
|
|
[`nix profile`](@docroot@/command-ref/new-cli/nix3-profile.md) now uses names to refer to installed packages when running [`list`](@docroot@/command-ref/new-cli/nix3-profile-list.md), [`remove`](@docroot@/command-ref/new-cli/nix3-profile-remove.md) or [`upgrade`](@docroot@/command-ref/new-cli/nix3-profile-upgrade.md) as opposed to indices. Profile element names are generated when a package is installed and remain the same until the package is removed.
|
|
|
|
**Warning**: The `manifest.nix` file used to record the contents of profiles has changed. Nix will automatically upgrade profiles to the new version when you modify the profile. After that, the profile can no longer be used by older versions of Nix.
|
|
|
|
- Give `nix store add` a `--hash-algo` flag [#9809](https://github.com/NixOS/nix/pull/9809)
|
|
|
|
Adds a missing feature that was present in the old CLI, and matches our
|
|
plans to have similar flags for `nix hash convert` and `nix hash path`.
|
|
|
|
- Coercion errors include the failing value
|
|
|
|
The `error: cannot coerce a <TYPE> to a string` message now includes the value
|
|
which caused the error.
|
|
|
|
Before:
|
|
|
|
```
|
|
error: cannot coerce a set to a string
|
|
```
|
|
|
|
After:
|
|
|
|
```
|
|
error: cannot coerce a set to a string: { aesSupport = «thunk»;
|
|
avx2Support = «thunk»; avx512Support = «thunk»; avxSupport = «thunk»;
|
|
canExecute = «thunk»; config = «thunk»; darwinArch = «thunk»; darwinMinVersion
|
|
= «thunk»; darwinMinVersionVariable = «thunk»; darwinPlatform = «thunk»; «84
|
|
attributes elided»}
|
|
```
|
|
|
|
- Type errors include the failing value
|
|
|
|
In errors like `value is an integer while a list was expected`, the message now
|
|
includes the failing value.
|
|
|
|
Before:
|
|
|
|
```
|
|
error: value is a set while a string was expected
|
|
```
|
|
|
|
After:
|
|
|
|
```
|
|
error: expected a string but found a set: { ghc810 = «thunk»;
|
|
ghc8102Binary = «thunk»; ghc8107 = «thunk»; ghc8107Binary = «thunk»;
|
|
ghc865Binary = «thunk»; ghc90 = «thunk»; ghc902 = «thunk»; ghc92 = «thunk»;
|
|
ghc924Binary = «thunk»; ghc925 = «thunk»; «17 attributes elided»}
|
|
```
|
|
|
|
- Source locations are printed more consistently in errors [#561](https://github.com/NixOS/nix/issues/561) [#9555](https://github.com/NixOS/nix/pull/9555)
|
|
|
|
Source location information is now included in error messages more
|
|
consistently. Given this code:
|
|
|
|
```nix
|
|
let
|
|
attr = {foo = "bar";};
|
|
key = {};
|
|
in
|
|
attr.${key}
|
|
```
|
|
|
|
Previously, Nix would show this unhelpful message when attempting to evaluate
|
|
it:
|
|
|
|
```
|
|
error:
|
|
… while evaluating an attribute name
|
|
|
|
error: value is a set while a string was expected
|
|
```
|
|
|
|
Now, the error message displays where the problematic value was found:
|
|
|
|
```
|
|
error:
|
|
… while evaluating an attribute name
|
|
|
|
at bad.nix:4:11:
|
|
|
|
3| key = {};
|
|
4| in attr.${key}
|
|
| ^
|
|
5|
|
|
|
|
error: expected a string but found a set
|
|
```
|
|
|
|
- Some stack overflow segfaults are fixed [#9616](https://github.com/NixOS/nix/issues/9616) [#9617](https://github.com/NixOS/nix/pull/9617)
|
|
|
|
The number of nested function calls has been restricted, to detect and report
|
|
infinite function call recursions. The default maximum call depth is 10,000 and
|
|
can be set with [the `max-call-depth`
|
|
option](@docroot@/command-ref/conf-file.md#conf-max-call-depth).
|
|
|
|
This replaces the `stack overflow (possible infinite recursion)` message.
|
|
|
|
- Better error reporting for `with` expressions [#9658](https://github.com/NixOS/nix/pull/9658)
|
|
|
|
`with` expressions using non-attrset values to resolve variables are now reported with proper positions, e.g.
|
|
|
|
```
|
|
nix-repl> with 1; a
|
|
error:
|
|
… while evaluating the first subexpression of a with expression
|
|
at «string»:1:1:
|
|
1| with 1; a
|
|
| ^
|
|
|
|
error: expected a set but found an integer
|
|
```
|
|
|
|
- Functions are printed with more detail [#7145](https://github.com/NixOS/nix/issues/7145) [#9606](https://github.com/NixOS/nix/pull/9606)
|
|
|
|
`nix repl`, `nix eval`, `builtins.trace`, and most other places values are
|
|
printed will now include function names and source location information:
|
|
|
|
```
|
|
$ nix repl nixpkgs
|
|
nix-repl> builtins.map
|
|
«primop map»
|
|
|
|
nix-repl> builtins.map lib.id
|
|
«partially applied primop map»
|
|
|
|
nix-repl> builtins.trace lib.id "my-value"
|
|
trace: «lambda id @ /nix/store/8rrzq23h2zq7sv5l2vhw44kls5w0f654-source/lib/trivial.nix:26:5»
|
|
"my-value"
|
|
```
|
|
|
|
- Flake operations like `nix develop` will no longer fail when run in a Git
|
|
repository where the `flake.lock` file is `.gitignore`d
|
|
[#8854](https://github.com/NixOS/nix/issues/8854)
|
|
[#9324](https://github.com/NixOS/nix/pull/9324)
|
|
|
|
- Nix commands will now respect Ctrl-C
|
|
[#7145](https://github.com/NixOS/nix/issues/7145)
|
|
[#6995](https://github.com/NixOS/nix/pull/6995)
|
|
[#9687](https://github.com/NixOS/nix/pull/9687)
|
|
|
|
Previously, many Nix commands would hang indefinitely if Ctrl-C was pressed
|
|
while performing various operations (including `nix develop`, `nix flake
|
|
update`, and so on). With several fixes to Nix's signal handlers, Nix
|
|
commands will now exit quickly after Ctrl-C is pressed.
|
|
|
|
- `nix copy` to a `ssh-ng` store now needs `--substitute-on-destination` (a.k.a. `-s`)
|
|
in order to substitute paths on the remote store instead of copying them.
|
|
The behavior is consistent with `nix copy` to a different kind of remote store.
|
|
Previously this behavior was controlled by `--builders-use-substitutes`.
|