nix-super/doc/manual/src/command-ref/nix-env.md

Name

nix-env - manipulate or query Nix user environments

Synopsis

nix-env [--option name value] [--arg name value] [--argstr name value] [{--file | -f} path] [{--profile | -p} *path(] [--system-filter system] [--dry-run] operation [options…] [arguments…]

Description

The command nix-env is used to manipulate Nix user environments. User environments are sets of software packages available to a user at some point in time. In other words, they are a synthesised view of the programs available in the Nix store. There may be many user environments: different users can have different environments, and individual users can switch between different environments.

nix-env takes exactly one operation flag which indicates the subcommand to be performed. These are documented below.

Selectors

Several commands, such as nix-env -q and nix-env -i, take a list of arguments that specify the packages on which to operate. These are extended regular expressions that must match the entire name of the package. (For details on regular expressions, see regex7.) The match is case-sensitive. The regular expression can optionally be followed by a dash and a version number; if omitted, any version of the package will match. Here are some examples:

• firefox
  Matches the package name firefox and any version.

• firefox-32.0
  Matches the package name firefox and version 32.0.

• gtk\\+
  Matches the package name gtk+. The + character must be escaped using a backslash to prevent it from being interpreted as a quantifier, and the backslash must be escaped in turn with another backslash to ensure that the shell passes it on.

• .\*
  Matches any package name. This is the default for most commands.

• '.*zip.*'
  Matches any package name containing the string zip. Note the dots: '*zip*' does not work, because in a regular expression, the character * is interpreted as a quantifier.

• '.*(firefox|chromium).*'
  Matches any package name containing the strings firefox or chromium.

Common options

This section lists the options that are common to all operations. These options are allowed for every subcommand, though they may not always have an effect.

• --file / -f path
  Specifies the Nix expression (designated below as the active Nix expression) used by the --install, --upgrade, and --query --available operations to obtain derivations. The default is ~/.nix-defexpr.

  If the argument starts with http:// or https://, it is interpreted as the URL of a tarball that will be downloaded and unpacked to a temporary location. The tarball must include a single top-level directory containing at least a file named default.nix.

• --profile / -p path
  Specifies the profile to be used by those operations that operate on a profile (designated below as the active profile). A profile is a sequence of user environments called generations, one of which is the current generation.

• --dry-run
  For the --install, --upgrade, --uninstall, --switch-generation, --delete-generations and --rollback operations, this flag will cause nix-env to print what would be done if this flag had not been specified, without actually doing it.

  --dry-run also prints out which paths will be substituted (i.e., downloaded) and which paths will be built from source (because no substitute is available).

• --system-filter system
  By default, operations such as --query --available show derivations matching any platform. This option allows you to use derivations for the specified platform system.

Files

• ~/.nix-defexpr
  The source for the default Nix expressions used by the --install, --upgrade, and --query --available operations to obtain derivations. The --file option may be used to override this default.

  If ~/.nix-defexpr is a file, it is loaded as a Nix expression. If the expression is a set, it is used as the default Nix expression. If the expression is a function, an empty set is passed as argument and the return value is used as the default Nix expression.

  If ~/.nix-defexpr is a directory containing a default.nix file, that file is loaded as in the above paragraph.

  If ~/.nix-defexpr is a directory without a default.nix file, then its contents (both files and subdirectories) are loaded as Nix expressions. The expressions are combined into a single set, each expression under an attribute with the same name as the original file or subdirectory.

  For example, if ~/.nix-defexpr contains two files, foo.nix and bar.nix, then the default Nix expression will essentially be

  {
    foo = import ~/.nix-defexpr/foo.nix;
    bar = import ~/.nix-defexpr/bar.nix;
  }
  

  The file manifest.nix is always ignored. Subdirectories without a default.nix file are traversed recursively in search of more Nix expressions, but the names of these intermediate directories are not added to the attribute paths of the default Nix expression.

  The command nix-channel places symlinks to the downloaded Nix expressions from each subscribed channel in this directory.

• ~/.nix-profile
  A symbolic link to the user's current profile. By default, this symlink points to prefix/var/nix/profiles/default. The PATH environment variable should include ~/.nix-profile/bin for the user environment to be visible to the user.

Operation --install

Synopsis

nix-env {--install | -i} args… [{--prebuilt-only | -b}] [{--attr | -A}] [--from-expression] [-E] [--from-profile path] [--preserve-installed | -P] [--remove-all | -r]

Description

The install operation creates a new user environment, based on the current generation of the active profile, to which a set of store paths described by args is added. The arguments args map to store paths in a number of possible ways:

• By default, args is a set of derivation names denoting derivations in the active Nix expression. These are realised, and the resulting output paths are installed. Currently installed derivations with a name equal to the name of a derivation being added are removed unless the option --preserve-installed is specified.

  If there are multiple derivations matching a name in args that have the same name (e.g., gcc-3.3.6 and gcc-4.1.1), then the derivation with the highest priority is used. A derivation can define a priority by declaring the meta.priority attribute. This attribute should be a number, with a higher value denoting a lower priority. The default priority is 0.

  If there are multiple matching derivations with the same priority, then the derivation with the highest version will be installed.

  You can force the installation of multiple derivations with the same name by being specific about the versions. For instance, nix-env -i gcc-3.3.6 gcc-4.1.1 will install both version of GCC (and will probably cause a user environment conflict!).

• If --attr (-A) is specified, the arguments are attribute paths that select attributes from the top-level Nix expression. This is faster than using derivation names and unambiguous. To find out the attribute paths of available packages, use nix-env -qaP.

• If --from-profile path is given, args is a set of names denoting installed store paths in the profile path. This is an easy way to copy user environment elements from one profile to another.

• If --from-expression is given, args are Nix functions that are called with the active Nix expression as their single argument. The derivations returned by those function calls are installed. This allows derivations to be specified in an unambiguous way, which is necessary if there are multiple derivations with the same name.

• If args are store derivations, then these are realised, and the resulting output paths are installed.

• If args are store paths that are not store derivations, then these are realised and installed.

• By default all outputs are installed for each derivation. That can be reduced by setting meta.outputsToInstall.

Flags

• --prebuilt-only / -b
  Use only derivations for which a substitute is registered, i.e., there is a pre-built binary available that can be downloaded in lieu of building the derivation. Thus, no packages will be built from source.

• --preserve-installed; -P
  Do not remove derivations with a name matching one of the derivations being installed. Usually, trying to have two versions of the same package installed in the same generation of a profile will lead to an error in building the generation, due to file name clashes between the two versions. However, this is not the case for all packages.

• --remove-all; -r
  Remove all previously installed packages first. This is equivalent to running nix-env -e '.*' first, except that everything happens in a single transaction.

Examples

To install a specific version of gcc from the active Nix expression:

$ nix-env --install gcc-3.3.2
installing `gcc-3.3.2'
uninstalling `gcc-3.1'

Note the previously installed version is removed, since --preserve-installed was not specified.

To install an arbitrary version:

$ nix-env --install gcc
installing `gcc-3.3.2'

To install using a specific attribute:

$ nix-env -i -A gcc40mips
$ nix-env -i -A xorg.xorgserver

To install all derivations in the Nix expression foo.nix:

$ nix-env -f ~/foo.nix -i '.*'

To copy the store path with symbolic name gcc from another profile:

$ nix-env -i --from-profile /nix/var/nix/profiles/foo gcc

To install a specific store derivation (typically created by nix-instantiate):

$ nix-env -i /nix/store/fibjb1bfbpm5mrsxc4mh2d8n37sxh91i-gcc-3.4.3.drv

To install a specific output path:

$ nix-env -i /nix/store/y3cgx0xj1p4iv9x0pnnmdhr8iyg741vk-gcc-3.4.3

To install from a Nix expression specified on the command-line:

$ nix-env -f ./foo.nix -i -E \
    'f: (f {system = "i686-linux";}).subversionWithJava'

I.e., this evaluates to (f: (f {system = "i686-linux";}).subversionWithJava) (import ./foo.nix), thus selecting the subversionWithJava attribute from the set returned by calling the function defined in ./foo.nix.

A dry-run tells you which paths will be downloaded or built from source:

$ nix-env -f '<nixpkgs>' -iA hello --dry-run
(dry run; not doing anything)
installing ‘hello-2.10’
this path will be fetched (0.04 MiB download, 0.19 MiB unpacked):
  /nix/store/wkhdf9jinag5750mqlax6z2zbwhqb76n-hello-2.10
  ...

To install Firefox from the latest revision in the Nixpkgs/NixOS 14.12 channel:

$ nix-env -f https://github.com/NixOS/nixpkgs/archive/nixos-14.12.tar.gz -iA firefox

Operation --upgrade

Synopsis

nix-env {--upgrade | -u} args [--lt | --leq | --eq | --always] [{--prebuilt-only | -b}] [{--attr | -A}] [--from-expression] [-E] [--from-profile path] [--preserve-installed | -P]

Description

The upgrade operation creates a new user environment, based on the current generation of the active profile, in which all store paths are replaced for which there are newer versions in the set of paths described by args. Paths for which there are no newer versions are left untouched; this is not an error. It is also not an error if an element of args matches no installed derivations.

For a description of how args is mapped to a set of store paths, see --install. If args describes multiple store paths with the same symbolic name, only the one with the highest version is installed.

Flags

• --lt
  Only upgrade a derivation to newer versions. This is the default.

• --leq
  In addition to upgrading to newer versions, also “upgrade” to derivations that have the same version. Version are not a unique identification of a derivation, so there may be many derivations that have the same version. This flag may be useful to force “synchronisation” between the installed and available derivations.

• --eq
  Only “upgrade” to derivations that have the same version. This may not seem very useful, but it actually is, e.g., when there is a new release of Nixpkgs and you want to replace installed applications with the same versions built against newer dependencies (to reduce the number of dependencies floating around on your system).

• --always
  In addition to upgrading to newer versions, also “upgrade” to derivations that have the same or a lower version. I.e., derivations may actually be downgraded depending on what is available in the active Nix expression.

For the other flags, see --install.

Examples

$ nix-env --upgrade gcc
upgrading `gcc-3.3.1' to `gcc-3.4'

$ nix-env -u gcc-3.3.2 --always (switch to a specific version)
upgrading `gcc-3.4' to `gcc-3.3.2'

$ nix-env --upgrade pan
(no upgrades available, so nothing happens)

$ nix-env -u (try to upgrade everything)
upgrading `hello-2.1.2' to `hello-2.1.3'
upgrading `mozilla-1.2' to `mozilla-1.4'

Versions

The upgrade operation determines whether a derivation y is an upgrade of a derivation x by looking at their respective name attributes. The names (e.g., gcc-3.3.1 are split into two parts: the package name (gcc), and the version (3.3.1). The version part starts after the first dash not followed by a letter. x is considered an upgrade of y if their package names match, and the version of y is higher that that of x.

The versions are compared by splitting them into contiguous components of numbers and letters. E.g., 3.3.1pre5 is split into [3, 3, 1, "pre", 5]. These lists are then compared lexicographically (from left to right). Corresponding components a and b are compared as follows. If they are both numbers, integer comparison is used. If a is an empty string and b is a number, a is considered less than b. The special string component pre (for pre-release) is considered to be less than other components. String components are considered less than number components. Otherwise, they are compared lexicographically (i.e., using case-sensitive string comparison).

This is illustrated by the following examples:

1.0 < 2.3
2.1 < 2.3
2.3 = 2.3
2.5 > 2.3
3.1 > 2.3
2.3.1 > 2.3
2.3.1 > 2.3a
2.3pre1 < 2.3
2.3pre3 < 2.3pre12
2.3a < 2.3c
2.3pre1 < 2.3c
2.3pre1 < 2.3q

Operation --uninstall

Synopsis

nix-env {--uninstall | -e} drvnames…

Description

The uninstall operation creates a new user environment, based on the current generation of the active profile, from which the store paths designated by the symbolic names drvnames are removed.

Examples

$ nix-env --uninstall gcc
$ nix-env -e '.*' (remove everything)

Operation --set

Synopsis

nix-env --set drvname

Description

The --set operation modifies the current generation of a profile so that it contains exactly the specified derivation, and nothing else.

Examples

The following updates a profile such that its current generation will contain just Firefox:

$ nix-env -p /nix/var/nix/profiles/browser --set firefox

Operation --set-flag

Synopsis

nix-env --set-flag name value drvnames

Description

The --set-flag operation allows meta attributes of installed packages to be modified. There are several attributes that can be usefully modified, because they affect the behaviour of nix-env or the user environment build script:

• priority can be changed to resolve filename clashes. The user environment build script uses the meta.priority attribute of derivations to resolve filename collisions between packages. Lower priority values denote a higher priority. For instance, the GCC wrapper package and the Binutils package in Nixpkgs both have a file bin/ld, so previously if you tried to install both you would get a collision. Now, on the other hand, the GCC wrapper declares a higher priority than Binutils, so the former’s bin/ld is symlinked in the user environment.

• keep can be set to true to prevent the package from being upgraded or replaced. This is useful if you want to hang on to an older version of a package.

• active can be set to false to “disable” the package. That is, no symlinks will be generated to the files of the package, but it remains part of the profile (so it won’t be garbage-collected). It can be set back to true to re-enable the package.

Examples

To prevent the currently installed Firefox from being upgraded:

$ nix-env --set-flag keep true firefox

After this, nix-env -u will ignore Firefox.

To disable the currently installed Firefox, then install a new Firefox while the old remains part of the profile:

$ nix-env -q
firefox-2.0.0.9 (the current one)

$ nix-env --preserve-installed -i firefox-2.0.0.11
installing `firefox-2.0.0.11'
building path(s) `/nix/store/myy0y59q3ig70dgq37jqwg1j0rsapzsl-user-environment'
collision between `/nix/store/...-firefox-2.0.0.11/bin/firefox'
  and `/nix/store/...-firefox-2.0.0.9/bin/firefox'.
(i.e., can’t have two active at the same time)

$ nix-env --set-flag active false firefox
setting flag on `firefox-2.0.0.9'

$ nix-env --preserve-installed -i firefox-2.0.0.11
installing `firefox-2.0.0.11'

$ nix-env -q
firefox-2.0.0.11 (the enabled one)
firefox-2.0.0.9 (the disabled one)

To make files from binutils take precedence over files from gcc:

$ nix-env --set-flag priority 5 binutils
$ nix-env --set-flag priority 10 gcc

Operation --query

Synopsis

nix-env {--query | -q} names… [--installed | --available | -a] [{--status | -s}] [{--attr-path | -P}] [--no-name] [{--compare-versions | -c}] [--system] [--drv-path] [--out-path] [--description] [--meta] [--xml] [--json] [{--prebuilt-only | -b}] [{--attr | -A} attribute-path]

Description

The query operation displays information about either the store paths that are installed in the current generation of the active profile (--installed), or the derivations that are available for installation in the active Nix expression (--available). It only prints information about derivations whose symbolic name matches one of names.

The derivations are sorted by their name attributes.

Source selection

The following flags specify the set of things on which the query operates.

• --installed
  The query operates on the store paths that are installed in the current generation of the active profile. This is the default.

• --available; -a
  The query operates on the derivations that are available in the active Nix expression.

Queries

The following flags specify what information to display about the selected derivations. Multiple flags may be specified, in which case the information is shown in the order given here. Note that the name of the derivation is shown unless --no-name is specified.

• --xml
  Print the result in an XML representation suitable for automatic processing by other tools. The root element is called items, which contains a item element for each available or installed derivation. The fields discussed below are all stored in attributes of the item elements.

• --json
  Print the result in a JSON representation suitable for automatic processing by other tools.

• --prebuilt-only / -b
  Show only derivations for which a substitute is registered, i.e., there is a pre-built binary available that can be downloaded in lieu of building the derivation. Thus, this shows all packages that probably can be installed quickly.

• --status; -s
  Print the status of the derivation. The status consists of three characters. The first is I or -, indicating whether the derivation is currently installed in the current generation of the active profile. This is by definition the case for --installed, but not for --available. The second is P or -, indicating whether the derivation is present on the system. This indicates whether installation of an available derivation will require the derivation to be built. The third is S or -, indicating whether a substitute is available for the derivation.

• --attr-path; -P
  Print the attribute path of the derivation, which can be used to unambiguously select it using the --attr option available in commands that install derivations like nix-env --install. This option only works together with --available

• --no-name
  Suppress printing of the name attribute of each derivation.

• --compare-versions / -c
  Compare installed versions to available versions, or vice versa (if --available is given). This is useful for quickly seeing whether upgrades for installed packages are available in a Nix expression. A column is added with the following meaning:

  • < version
    A newer version of the package is available or installed.

  • = version
    At most the same version of the package is available or installed.

  • > version
    Only older versions of the package are available or installed.

  • - ?
    No version of the package is available or installed.

• --system
  Print the system attribute of the derivation.

• --drv-path
  Print the path of the store derivation.

• --out-path
  Print the output path of the derivation.

• --description
  Print a short (one-line) description of the derivation, if available. The description is taken from the meta.description attribute of the derivation.

• --meta
  Print all of the meta-attributes of the derivation. This option is only available with --xml or --json.

Examples

To show installed packages:

$ nix-env -q
bison-1.875c
docbook-xml-4.2
firefox-1.0.4
MPlayer-1.0pre7
ORBit2-2.8.3
…

To show available packages:

$ nix-env -qa
firefox-1.0.7
GConf-2.4.0.1
MPlayer-1.0pre7
ORBit2-2.8.3
…

To show the status of available packages:

$ nix-env -qas
-P- firefox-1.0.7   (not installed but present)
--S GConf-2.4.0.1   (not present, but there is a substitute for fast installation)
--S MPlayer-1.0pre3 (i.e., this is not the installed MPlayer, even though the version is the same!)
IP- ORBit2-2.8.3    (installed and by definition present)
…

To show available packages in the Nix expression foo.nix:

$ nix-env -f ./foo.nix -qa
foo-1.2.3

To compare installed versions to what’s available:

$ nix-env -qc
...
acrobat-reader-7.0 - ?      (package is not available at all)
autoconf-2.59      = 2.59   (same version)
firefox-1.0.4      < 1.0.7  (a more recent version is available)
...

To show all packages with “zip” in the name:

$ nix-env -qa '.*zip.*'
bzip2-1.0.6
gzip-1.6
zip-3.0
…

To show all packages with “firefox” or “chromium” in the name:

$ nix-env -qa '.*(firefox|chromium).*'
chromium-37.0.2062.94
chromium-beta-38.0.2125.24
firefox-32.0.3
firefox-with-plugins-13.0.1
…

To show all packages in the latest revision of the Nixpkgs repository:

$ nix-env -f https://github.com/NixOS/nixpkgs/archive/master.tar.gz -qa

Operation --switch-profile

Synopsis

nix-env {--switch-profile | -S} path

Description

This operation makes path the current profile for the user. That is, the symlink ~/.nix-profile is made to point to path.

Examples

$ nix-env -S ~/my-profile

Operation --list-generations

Synopsis

nix-env --list-generations

Description

This operation print a list of all the currently existing generations for the active profile. These may be switched to using the --switch-generation operation. It also prints the creation date of the generation, and indicates the current generation.

Examples

$ nix-env --list-generations
  95   2004-02-06 11:48:24
  96   2004-02-06 11:49:01
  97   2004-02-06 16:22:45
  98   2004-02-06 16:24:33   (current)

Operation --delete-generations

Synopsis

nix-env --delete-generations generations

Description

This operation deletes the specified generations of the current profile. The generations can be a list of generation numbers, the special value old to delete all non-current generations, a value such as 30d to delete all generations older than the specified number of days (except for the generation that was active at that point in time), or a value such as +5 to keep the last 5 generations ignoring any newer than current, e.g., if 30 is the current generation +5 will delete generation 25 and all older generations. Periodically deleting old generations is important to make garbage collection effective.

Examples

$ nix-env --delete-generations 3 4 8

$ nix-env --delete-generations +5

$ nix-env --delete-generations 30d

$ nix-env -p other_profile --delete-generations old

Operation --switch-generation

Synopsis

nix-env {--switch-generation | -G} generation

Description

This operation makes generation number generation the current generation of the active profile. That is, if the profile is the path to the active profile, then the symlink profile is made to point to profile-generation-link, which is in turn a symlink to the actual user environment in the Nix store.

Switching will fail if the specified generation does not exist.

Examples

$ nix-env -G 42
switching from generation 50 to 42

Operation --rollback

Synopsis

nix-env --rollback

Description

This operation switches to the “previous” generation of the active profile, that is, the highest numbered generation lower than the current generation, if it exists. It is just a convenience wrapper around --list-generations and --switch-generation.

Examples

$ nix-env --rollback
switching from generation 92 to 91

$ nix-env --rollback
error: no generation older than the current (91) exists

Environment variables

• NIX_PROFILE
  Location of the Nix profile. Defaults to the target of the symlink ~/.nix-profile, if it exists, or /nix/var/nix/profiles/default otherwise.