Progress towards #10766
I thought that #10768 achieved, but when I went to use this stuff (in
Hydra), turns out it did not. (Those `using FooConfig;` lines were not
working --- they are so finicky!) This PR gets the job done, and adds
some trivial unit tests to make sure I did what I intended.
I had to add add a header to expose `SSHStoreConfig`, after which the
preexisting `ssh-store-config.*` were very confusingly named files, so I
renamed them to `common-ssh-store-config.hh` to match the type defined
therein.
They are not actually part of the store layer, but instead part of the
Nix executable infra (libraries don't need plugins, executables do).
This is part of a larger project of moving all of our legacy settings
infra to libmain, and having the underlying libraries just have plain
configuration structs detached from any settings infra / UI layer.
Progress on #5638
This makes it possible to certain discern failures from empty
snippets, which I think is an ok review comment.
Maybe it should do so for swapped column indexes too, but I'm not
sure.
I don't think it matters in the grand scheme. We don't even have
a real use case for `nullopt` now anyway.
Since we don't have a use case, I'm not applying this logic to
higher level functions yet.
Unfortunately these don't render correctly, because they go into the
markdown renderer, instead of the terminal.
```
nix-repl> :doc lib.version
Attribute '[35;1mversion[0m'
… defined at [35;1m/home/user/h/nixpkgs/lib/default.nix:73:40[0m
```
We could switch that to go direct to the terminal, but then we should
do the same for the primops, to get a consistent look.
Reverting for now.
This reverts commit 3413e0338cbee1c7734d5cb614b5325e51815cde.
fetchurl can be given a name and url aside from just the url.
Giving a name can be useful if the url has invalid characters such as
tilde for the store.
... at call sites that are may be in the hot path.
I do not know how clever the compiler gets at these sites.
My primary concern is to not regress performance and I am confident
that this achieves it the easy way.
When the separator is empty, no difference is observable.
Note that concatStringsSep has centralized definitions. This adds the
required definitions. Alternatively, `strings-inline.hh` could be
included at call sites.
Considering that `value` was probably parsed with tokenizeString
prior, it's unlikely to contain empty strings, and we have no
reason to remove them either.
Empty attributes are probably not well supported, but the least we
could do is leave a hint.
Attribute path rendering and parsing should be done according to
Nix expression syntax in my opinion.
(System) features are unlikely to be empty strings, but when they
come in through structuredAttrs, they probably can.
I don't think this means we should drop them, but most likely they
will be dropped after this because next time they'll be parsed with
tokenizeString.
TODO: We should forbid empty features.
I don't think it's completely impossible, but I can't construct
one easily as derivationStrict seems to (re)tokenize the outputs
attribute, dropping the empty output.
It's not a scenario we have to account for here.
Bug not reported in 6 years, but here you go.
Also it is safe to switch to normal concatStringsSep behavior
because tokenizeString does not produce empty items.
The empty attribute name should not be dropped from attribute paths.
Rendering attribute paths with concatStringsSep is lossy and wrong,
but this is just a first improvement while dealing with the
dropEmptyInitThenConcatStringsSep problem.
Known behavior changes:
- `MemorySourceAccessor`'s comparison operators no longer forget to
compare the `SourceAccessor` base class.
Progress on #10832
What remains for that issue is hopefully much easier!
- Fix eval cache not being persisted in `nix develop` (since #10570)
- Don't attempt to commit cache transaction if there is no active transaction, which will spew errors in edge cases
- Drive-by: trivial typo fix
Progress on #5638
There are still a global fetcher and eval settings, but they are pushed
down into `libnixcmd`, which is a lot less bad a place for this sort of
thing.
Continuing process pioneered in
52bfccf8d8.
The move assignment was implicitly generated and used in
src/libstore/build/goal.cc:90:22:
90 | this->ex = std::move(*ex);
Clang warns about this generated method being deprecated, so making
them explicit fixes the warning.
When --unpack was used the nix would add the current directory to the
nix store instead of the content of unpacked.
The reason for this is that std::distance already consumes the iterator.
To fix this we re-instantiate the directory iterator in case the
directory only contains a single entry.
This improves the error message of nix-env -qa, among others, which
is crucial for understanding some ofborg eval error reports, such as
https://gist.github.com/GrahamcOfBorg/89101ca9c2c855d288178f1d3c78efef
After this change, it will report the same trace, but also start with
```
error:
… while evaluating the attribute 'devShellTools'
… while evaluating the attribute 'nixos'
… while evaluating the attribute 'docker-tools-nix-shell'
… while evaluating the attribute 'aarch64-darwin'
… from call site
at /home/user/h/nixpkgs/outpaths.nix:48:6:
47| tweak = lib.mapAttrs
48| (name: val:
| ^
49| if name == "recurseForDerivations" then true
<same>
```
The recent fix for CVE-2024-38531 broke the sandbox on macOS
completely. As it’s not practical to use `chroot(2)` on
macOS, the build takes place in the main filesystem tree, and the
world‐unreadable wrapper directory prevents the build from accessing
its `$TMPDIR` at all.
The macOS sandbox probably shouldn’t be treated as any kind of a
security boundary in its current state, but this specific vulnerability
wasn’t possible to exploit on macOS anyway, as creating `set{u,g}id`
binaries is blocked by sandbox policy.
Locking down the build sandbox further may be a good idea in future,
but it already has significant compatibility issues. For now, restore
the previous status quo on macOS.
Thanks to @alois31 for helping me come to a better understanding of
the vulnerability.
Fixes: 1d3696f0fbCloses: #11002
- use the iterator in `CanonPath` to count `level`
- use the `CanonPath::basename` method
- use `CanonPath::root` instead of `CanonPath{""}`
- remove `Path` and `PathView`, use `std::filesystem::path` directly
move together all syntactic and semantic information into one
page, and add a page on data types, which in turn links to the syntax and
semantics.
also split out the note on scoping rules into its own page.
Co-authored-by: Ryan Hendrickson <ryan.hendrickson@alum.mit.edu>
Inspired by
010ff57ebb
From the original PR:
> We do not have any of these warnings appearing at the moment, but
> it seems like a good idea to enable [[nodiscard]] checking anyway.
> Once we start introducing more functions with must-use conditions we will
> need such checking, and the rust stdlib has proven them very useful.
The code that counts the number of elided attrs incorrectly used the
per-printer "global" attribute counter instead of a counter that
was relevant only to the current attribute set.
This bug flew under the radar because often the attribute sets aren't
nested, not big enough, or we wouldn't pay attention to the numbers.
I've noticed the issue because the difference underflowed.
Although this behavior is tested by the functional test
lang/eval-fail-bad-string-interpolation-4.nix, the underflow slipped
through review. A simpler reproducer would be as follows, but I
haven't added it to the test suite to keep it simple and marginally
faster.
```
$ nix run nix/2.23.1 -- eval --expr '"" + (let v = { a = { a = 1; b = 2; c = 1; d = 1; e = 1; f = 1; g = 1; h = 1; }; b = { a = 1; b = 1; c = 1; }; }; in builtins.deepSeq v v)'
error:
… while evaluating a path segment
at «string»:1:6:
1| "" + (let v = { a = { a = 1; b = 2; c = 1; d = 1; e = 1; f = 1; g = 1; h = 1; }; b = { a = 1; b = 1; c = 1; }; }; in builtins.deepSeq v v)
| ^
error: cannot coerce a set to a string: { a = { a = 1; b = 2; c = 1; d = 1; e = 1; f = 1; g = 1; h = 1; }; b = { a = 1; «4294967289 attributes elided» }; }
```
We don't apply any patches to it, and vendoring it locks users into
bugs (it hasn't been updated since its introduction in late 2021).
Closes https://git.lix.systems/lix-project/lix/issues/164
Change-Id: Ied071c841fc30b0dfb575151afd1e7f66970fdb9
(cherry picked from commit 80405d06264f0de1c16ee2646388ab501df20628)
It was added above this conditional
Worker::Worker(LocalStore & store)
: store(store)
{
/* Debugging: prevent recursive workers. */
if (working) abort();
working = true;
However, `working` has since been removed.
Source: 7f8e805c8e/src/libstore/build.cc (L2617)
The old `std::variant` is bad because we aren't adding a new case to
`FileIngestionMethod` so much as we are defining a separate concept ---
store object content addressing rather than file system object content
addressing. As such, it is more correct to just create a fresh
enumeration.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Previously, the .chroot directory had permission 750 or 755 (depending
on the uid-range system feature) and was owned by root/nixbld. This
makes it possible for any nixbld user (if uid-range is disabled) or
any user (if uid-range is enabled) to inspect the contents of the
chroot of an active build and maybe interfere with it (e.g. via /tmp
in the chroot, which has 1777 permission).
To prevent this, the root is now a subdirectory of .chroot, which has
permission 700 and is owned by root/root.
Instead of running the builds under
`$TMPDIR/{unique-build-directory-owned-by-the-build-user}`, run them
under `$TMPDIR/{unique-build-directory-owned-by-the-daemon}/{subdir-owned-by-the-build-user}`
where the build directory is only readable and traversable by the daemon user.
This achieves two things:
1. It prevents builders from making their build directory world-readable
(or even writeable), which would allow the outside world to interact
with them.
2. It prevents external processes running as the build user (either
because that somehow leaked, maybe as a consequence of 1., or because
`build-users` isn't in use) from gaining access to the build
directory.
the `std::filesystem::create_directories` can fail due to insufficient
permissions. We convert this error into a `SysError` and catch it
wherever required.
#2230 broadened the scope of macOS hardlink exclusion but did not change the comments. This was a little confusing for me, so I figured the comments should be updated.
The documentation is clear about the supported formats (with at least
`builtins.fetchTarball`). The way the code was written previously it
supported all the formats that libarchive supported. That is a
surprisingly large amount of formats that are likely not on the radar
of the Nix developers and users. Before people end up relying on
this (or if they do) it is better to break it now before it becomes a
widespread "feature".
Zip file support has been retained as (at least to my knowledge)
historically that has been used to fetch nixpkgs in some shell
expressions *many* years back.
Fixes https://github.com/NixOS/nix/issues/10917
The documentation "solved" this by specifying a precondition, but
let's just make it more robust, and not leak irrelevant messages
that might linger.
We don't clear the message when clearing the status, in order to
keep clearing fast; see last_err field doc.
Special thanks to everyone that has worked on a Meson port so far,
@p01arst0rm and @Qyriad in particular.
Co-Authored-By: p01arst0rm <polar@ever3st.com>
Co-Authored-By: Artemis Tosini <lix@artem.ist>
Co-Authored-By: Artemis Tosini <me@artem.ist>
Co-Authored-By: Felix Uhl <felix.uhl@outlook.com>
Co-Authored-By: Jade Lovelace <lix@jade.fyi>
Co-Authored-By: Lunaphied <lunaphied@lunaphied.me>
Co-Authored-By: Maximilian Bosch <maximilian@mbosch.me>
Co-Authored-By: Pierre Bourdon <delroth@gmail.com>
Co-Authored-By: Qyriad <qyriad@qyriad.me>
Co-Authored-By: Rebecca Turner <rbt@sent.as>
Co-Authored-By: Winter <winter@winter.cafe>
Co-Authored-By: eldritch horrors <pennae@lix.systems>
Co-Authored-By: jade <lix@jade.fyi>
Co-Authored-By: julia <midnight@trainwit.ch>
Co-Authored-By: rebecca “wiggles” turner <rbt@sent.as>
Co-Authored-By: wiggles dog <rbt@sent.as>
Co-Authored-By: fricklerhandwerk <valentin@fricklerhandwerk.de>
Co-authored-by: Eli Schwartz <eschwartz93@gmail.com>
I hope this will make it easier to maintain, and also make it easier for
others to assist with porting the rest of the build system to Meson.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Previously (in cfc18a7739), we forgot to
compare the algo at all. This means we keep the same ordering as before
by making the stuff we always have compared take priority.
The idea is two-fold:
- Replace autotools with Meson
- Build each library in its own derivation
The interaction of these two features is that Meson's "subprojects"
feature (https://mesonbuild.com/Subprojects) allows us to have single
dev shell for building all libraries still, while also building things
separately. This allows us to break up the build without a huge
productivity lost.
I tested the Linux native build, and NetBSD and Windows cross builds.
Also do some clean ups of the Flake in the process of supporting new
jobs.
Special thanks to everyone that has worked on a Meson port so far,
@p01arst0rm and @Qyriad in particular.
Co-Authored-By: p01arst0rm <polar@ever3st.com>
Co-Authored-By: Artemis Tosini <lix@artem.ist>
Co-Authored-By: Artemis Tosini <me@artem.ist>
Co-Authored-By: Felix Uhl <felix.uhl@outlook.com>
Co-Authored-By: Jade Lovelace <lix@jade.fyi>
Co-Authored-By: Lunaphied <lunaphied@lunaphied.me>
Co-Authored-By: Maximilian Bosch <maximilian@mbosch.me>
Co-Authored-By: Pierre Bourdon <delroth@gmail.com>
Co-Authored-By: Qyriad <qyriad@qyriad.me>
Co-Authored-By: Rebecca Turner <rbt@sent.as>
Co-Authored-By: Winter <winter@winter.cafe>
Co-Authored-By: eldritch horrors <pennae@lix.systems>
Co-Authored-By: jade <lix@jade.fyi>
Co-Authored-By: julia <midnight@trainwit.ch>
Co-Authored-By: rebecca “wiggles” turner <rbt@sent.as>
Co-Authored-By: wiggles dog <rbt@sent.as>
Co-Authored-By: fricklerhandwerk <valentin@fricklerhandwerk.de>
Co-authored-By: Eli Schwartz <eschwartz93@gmail.com>
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
This is not really part of the evaluator: it is just an integration
between Boehm GC and Boost coroutines usable for any purpose. The
evaluator (merely) optionally uses it.
The implementation of `nix::createDirs` allows it to be a simple wrapper
around `std::filesystem::create_directories` as its return value is not
used anywhere.
throwing exceptions is fine, but throwing exceptions during exception
handling is hard enough to do correctly that we should just forbid it
entirely out of an overabundance of caution. in cases where terminate
is the correct answer the users of Finally must call it manually now.
Source: 6c777476c9
Before, `-lnixutil` was just stuck in `nix-store.pc`, but that doesn't
seem so nice.
This prepares us to distribute `libnixutil` in a separate package if we
want, but it should be a good change either way. I suspect it wasn't
done before because libutil was an extra unstable interface, but I don't
think we need worry about that. *All* the C++ is less stable than the C
(or that's the goal at least).
For what it's worth, Lix also created this pkg-config file *en passant*
during their rename:
c97e17144e (diff-3c4f60cc44a0e35444c7f45331cfa50f76637118)
This re-enables support for older bwdgc versions without complicating
the code too much.
Coroutines generally only interfere with GC during source filtering,
so it's not too bad of a regression on older bdwgc.
This seems preferable over conditional compilation to enable the patch
etc; we've already spent a lot of complexity budget on this GC-coroutine
interaction...
Manually tested by printing to stderr in both branches (sp in os
stack, or not), and triggering a GC in a filterSource function,
e.g.:
let
generateTree = n: if n == 0 then "ha" else { left = generateTree (n - 1); right = generateTree (n - 1); };
in
builtins.deepSeq (generateTree 18) ...
Note that the darwin still uses the strategy of disabling GC, despite
having an implementation that compiles. The proper solution will be
enabled and tested later.
... so that we may perhaps later extend the interface.
Note that Nixpkgs' lib.warn already requires a string coercible
argument, so this is reasonable. Also note that string coercible
values aren't all strings, but in practice, for warn, they are.
Progress on #10832
This doesn't switch to auto-deriving the fields, but by defining `<=>`
we allow deriving `<=>` in downstream types where `Hash` is used.
Fixes assertion failure if outputsToInstall is empty by defaulting to the "out"
output. That is, behavior between the following commands should be consistent:
$ nix build --no-link --json .#nothing-to-install-no-out
error: derivation '/nix/store/eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee-nothing-to-install-no-out.drv' does not have wanted outputs 'out'
$ nix build --no-link --file default.nix --json nothing-to-install-no-out
error: derivation '/nix/store/eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee-nothing-to-install-no-out.drv' does not have wanted outputs 'out'
Real-world example of this issue:
$ nix build --json .#.legacyPackages.aarch64-linux.texlive.pkgs.iwona
error: derivation '/nix/store/dj0h6b0pnlnan5nidnhqa0bmzq4rv6sx-iwona-0.995b.drv' does not have wanted outputs 'out'
$ git rev-parse HEAD
eee33247cf6941daea8398c976bd2dda7962b125
$ nix build --json --file . texlive.pkgs.iwona
nix: src/libstore/outputs-spec.hh:46: nix::OutputsSpec::Names::Names(std::set<std::__cxx11::basic_string<char> >&&): Assertion `!empty()' failed.
Aborted (core dumped)
1. Fix build by making the legacy SSH Storey's secret `logFD` setting
not a setting on Windows. (It doesn't make sense to specify `void *`
handles by integer cross-proccess, I don't think.)
2. Move some files that don't need to be Unix-only anymore back to their
original locations.
Before:
$ nix flake lock --override-input nixpkgs gitlab:simple-nixos-mailserver/nixos-mailserver/nonexistent
fetching git input 'git+file:///home/linus/projects/lix'
fetching gitlab input 'gitlab:simple-nixos-mailserver/nixos-mailserver/nonexistent'
error: [json.exception.type_error.302] type must be string, but is null
After:
/tmp/inst/bin/nix flake lock --override-input nixpkgs gitlab:simple-nixos-mailserver/nixos-mailserver/nonexistent
warning: unknown experimental feature 'repl-flake'
error:
… while updating the lock file of flake 'git+file:///home/joerg/git/nix?ref=refs/heads/master&rev=62693c2c37c8edd92f95114eb1387b461fc671df'
… while updating the flake input 'nixpkgs'
… while fetching the input 'gitlab:simple-nixos-mailserver/nixos-mailserver/nonexistent'
error: No commits returned by GitLab API -- does the git ref really exist?
Adapted from: 3df013597d
This turns errors like:
error: flake output attribute 'hydraJobs' is not a derivation or path
into errors like:
error: expected flake output attribute 'hydraJobs' to be a derivation or
path but found a set: { binaryTarball = «thunk»; build = «thunk»; etc> }
This change affects all InstallableFlake commands.
Source: 20981461d4
Signed-off-by: Jörg Thalheim <joerg@thalheim.io>
* docs: mention importNative/exec in allow-unsafe-native-code-during-evaluation
Both of these still needs their own actual documentation, but they are
at least now mentioned that they exist and what they're enabled by.
Co-authored-by: Qyriad <qyriad@qyriad.me>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
- Get a rump derivation goal: hook instance will come later, local
derivation goal will come after that.
- Start cleaning up the channel / waiting code with an abstraction.
By moving `host` to the config, we can do a lot further cleanups and
dedups. This anticipates a world where we always go `StoreReference` ->
`*StoreConfig` -> `Store*` rather than skipping the middle step too.
Progress on #10766
Progress on https://github.com/NixOS/hydra/issues/1164
This increases test coverage, and gets the worker protocol ready to be
used by Hydra.
Why don't we just try to use the store interface in Hydra? Well, the
problem is that the store interface works on connection pools, with each
opreation getting potentially a different connection, but the way temp
roots work requires that we keep one logical "transaction" (temp root
session) using the same connection.
The longer-term solution probably is making connections themselves
implement the store interface, but that is something that builds on
this, so I feel OK that this is not churn in the wrong direction.
Fixes#9584
We don't want to rely on how C assigns numbers for enums in the wire
format. Sure, this is totally determined by the ABI, but it obscures the
code and makes it harder to safely change the enum definition (should we
need to) without accidentally breaking the wire format.
Do this instead of an unchecked cast
I redid this to use the serialisation framework (including a unit test),
but I am keeping the reference to credit Jade for spotting the issue.
Change-Id: Icf6af7935e8f139bef36b40ad475e973aa48855c
(adapted from commit 2a7a824d83dc5fb33326b8b89625685f283a743b)
Co-Authored-By: Jade Lovelace <lix@jade.fyi>
File not found while importing is not currently caught by the tab-completion handler.
Original bug report: https://git.lix.systems/lix-project/lix/issues/340
Fix has been adapted from https://gerrit.lix.systems/c/lix/+/1189
Example crash:
$ cat /tmp/foo.nix
{
someImport = import ./this_file_does_not_exist;
}
$ ./src/nix/nix repl --file /tmp/foo.nix
warning: unknown experimental feature 'repl-flake'
Nix 2.23.0pre20240517_dirty
Type :? for help.
Loading installable ''...
Added 1 variables.
nix-repl> someImport.<TAB>
This way we can commit the same amount of stack size (64 MB) without a conditional.
Includes nix, libnixexpr-tests, libnixfetchers-tests, libnixstore-tests, libnixutil-tests.
https://github.com/NixOS/nix/pull/10555 added a check requiring
that output parameters always have an uninitialized Value as argument.
Unfortunately the output parameter of the primop callback received
a thunk instead.
See the comment for implementation considerations.
This was accidentally removed in
e989c83b44. I restored it and also did a
few other cleanups:
- Make a static method for namespacing purposes
- Put the test files in the data dir with the other test data
- Avoid mutating globals in the machine config tests
This will be used by Hydra.
Need to decouple parsing from actually opening a store for Machine
configs.
Co-authored-by: Théophane Hufschmitt <7226587+thufschmitt@users.noreply.github.com>
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
In particular `local://<path>` and `unix://` (without any path) now
work, and mean the same things as `local` and `daemon`, respectively. We
thus now have the opportunity to desguar `local` and `daemon` early.
This will allow me to make a change to
https://github.com/NixOS/nix/pull/9839 requested during review to
desugar those earlier.
Co-authored-by: Théophane Hufschmitt <7226587+thufschmitt@users.noreply.github.com>
1. Hydra currently queries for multiple path infos at once, so let us
make a connection item for that.
2. The minimum of the two versions should always be used, see #9584.
(The issue remains open because the daemon protocol needs to be
likewise updated.)
The JSON format no longer uses the legacy ATerm `r:` prefixing nonsese,
but separate fields.
Progress on #9866
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Basically I'd expect the same behavior as with `nix-build`, i.e.
with `--keep-going` the hash-mismatch error of each failing
fixed-output derivation is shown.
The approach is derived from `Store::buildPaths` (`entry-point.cc`):
instead of throwing the first build-result, check if there are any build
errors and if so, display all of them and throw after that.
Unfortunately, the BuildResult struct doesn't have an `ErrorInfo`
(there's a FIXME for that at least), so I have to construct my own here.
This is a rather cheap bugfix and I decided against touching too many
parts of libstore for that (also I don't know if that's in line with the
ongoing refactoring work).
Closes https://git.lix.systems/lix-project/lix/issues/302
Change-Id: I378ab984fa271e6808c6897c45e0f070eb4c6fac
Signed-off-by: Jörg Thalheim <joerg@thalheim.io>
On several occasions I've found myself confused when trying to delete
a store path, because I am told it's still alive, but
nix-store --query --roots doesn't show anything. Let's save future
users this confusion by mentioning that a path might be alive due to
having referrers, not just roots.
In addition:
- Take the opportunity to add a bunch more missing hyperlinks, too.
- Remove some glossary entries that are now subsumed by dedicated pages.
We used to not be able to do this without breaking link fragments, but
now we can, so pick up where we left off.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
This is useful for diagnosing whether an evaluation is copying large
paths to the store. Example:
$ nix build .#packages.x86_64-linux.default --large-path-warning-threshold 1000000
warning: copied large path '/home/eelco/Dev/nix-master/' to the store (6271792 bytes)
warning: copied large path '«github:NixOS/nixpkgs/b550fe4b4776908ac2a861124307045f8e717c8e?narHash=sha256-7kkJQd4rZ%2BvFrzWu8sTRtta5D1kBG0LSRYAfhtmMlSo%3D»/' to the store (155263768 bytes)
warning: copied large path '«github:libgit2/libgit2/45fd9ed7ae1a9b74b957ef4f337bc3c8b3df01b5?narHash=sha256-oX4Z3S9WtJlwvj0uH9HlYcWv%2Bx1hqp8mhXl7HsLu2f0%3D»/' to the store (22175416 bytes)
warning: copied large path '/nix/store/z985088mcd6w23qwdlirsinnyzayagki-source' to the store (5885872 bytes)
This fixes https://github.com/NixOS/nixpkgs/pull/290775 by not expanding aliases
when sourcing the stdenv setup script. The way bash handles aliases is to expand
them when a function is defined, not when it is used. I.e.:
$ alias echo="echo bar "
$ echo foo
bar foo
$ xyzzy() { echo foo; }
$ shopt -u expand_aliases
$ xyzzy
bar foo
$ xyzzy2() { echo foo; }
$ xyzzy2
foo
The problem is that ~/.bashrc is sourced before the stdenv setup, and bashrc
commonly sets aliases for ‘cp’, ‘mv’ and ‘rm’ which you don’t want to take
effect in the stdenv derivation builders. The original commit introducing this
feature (5fd8cf7667) even mentioned this very
alias.
The only way to avoid this is to disable aliases entirely while sourcing the
stdenv setup, and reenable them afterwards.
Passing the commit message as an argument causes update failures on repositories with lots of flake inputs. In some cases, the commit message is over 250,000 bytes.
the old `copyFile` was just a wrapper that was calling the `copy`
function. This wrapper function is removed and the `copy` function is
renamed to `copyFile`.
Building derivations is a lot harder, but the downloading goals is
portable enough.
The "common channel" code is due to Volth. I wonder if there is a way we
can factor it out into separate functions / files to avoid some
within-function CPP.
Co-authored-by: volth <volth@volth.com>
In streaming mode, libarchive doesn't handle symlinks in zip files
correctly. So write the entire file to disk so libarchive can access
it in random-access mode.
Fixes#10649. This was broken in cabee98152.
* Document string context
Now what we have enough primops, we can document how string contexts
work.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: Théophane Hufschmitt <7226587+thufschmitt@users.noreply.github.com>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
Co-authored-by: Felix Uhl <iFreilicht@users.noreply.github.com>
builtins.strictDerivation returns an attribute set with drvPath and
output paths. For some reason, current implementation forbids drv
instead of drvPath.
Sometimes we read a directory with children we cannot stat. It's a pitty
we even try to stat at all (wasteful) in the `DT_UNKNOWN` case, but at
least this should get rid of the failure.
This was changed in #10611, which caused the derivation paths of
anything using builtin:fetchurl to change (i.e. all of
Nixpkgs). However, impureEnvVars doesn't actually do anything for
builtin:fetchurl, so we can just set it to its historical value.
This makes for shorter and more portable code.
The only tricky part is catching exceptions: I just searched for near by
`catch (Error &)` or `catch (SysError &)` and adjusted them to `catch
(std::filesystem::filesystem_error &)` according to my human judgement.
Good for windows portability; will help @siddhantk232 with his GSOC
project.
Different parts of the project honor different sets of proxy environment
variables. With this commit all parts of the project will honor the same
set of proxy environment variables.
---------
Co-authored-by: Your Name <you@example.com>
Co-authored-by: John Ericson <John.Ericson@Obsidian.Systems>
Now that SourcePath uses a SourceAccessor instead of an InputAccessor,
we can use it in function signatures instead of passing a
SourceAccessor and CanonPath separately.
Make sure that `extraSandboxProfile` is set before we check whether it's
empty or not (in the `sandbox=true` case).
Also adds a test case for this.
Co-Authored-By: Artemis Tosini <lix@artem.ist>
Co-Authored-By: Eelco Dolstra <edolstra@gmail.com>
After the removal of the InputAccessor::fetchToStore() method, the
only remaining functionality in InputAccessor was `fingerprint` and
`getLastModified()`, and there is no reason to keep those in a
separate class.
Fix formatting violations, update blacklist to reflect moved files.
PR #10556 passed CI before the new formating rules were added, and our
CI has the race condition of allowing old results, resulting in master
getting broken.
This missing GC root wasn't much of a problem before, because the
heap would end up with a reference to the `baseEnv` pretty soon,
but when unit testing, the construction of `EvalState` doesn't
necessarily happen well before GC runs for the first time.
Found while unit testing the Rust bindings that currently reside
at https://github.com/nixops4/nixops4/tree/main/rust
Having a narHash doesn't mean that we have the other attributes
returned by the fetcher (such as lastModified or rev). For instance,
$ nix flake metadata github:NixOS/patchelf/7c2f768bf9601268a4e71c2ebe91e2011918a70f
Last modified: 2024-01-15 10:51:22
but
$ nix flake metadata github:NixOS/patchelf/7c2f768bf9601268a4e71c2ebe91e2011918a70f?narHash=sha256-PPXqKY2hJng4DBVE0I4xshv/vGLUskL7jl53roB8UdU%3D
(does not print a "Last modified")
The latter only happens if the store path already exists or is
substitutable, which made this impure behaviour unpredictable.
Fixes#10601.
