In EvalState::checkSourcePath, the path is checked against the list of
allowed paths first and later it's checked again *after* resolving
symlinks.
The resolving of the symlinks is done via canonPath, which also strips
out "../" and "./". However after the canonicalisation the error message
pointing out that the path is not allowed prints the symlink target in
the error message.
Even if we'd suppress the message, symlink targets could still be leaked
if the symlink target doesn't exist (in this case the error is thrown in
canonPath).
So instead, we now do canonPath() without symlink resolving first before
even checking against the list of allowed paths and then later do the
symlink resolving and checking the allowed paths again.
The first call to canonPath() should get rid of all the "../" and "./",
so in theory the only way to leak a symlink if the attacker is able to
put a symlink in one of the paths allowed by restricted evaluation mode.
For the latter I don't think this is part of the threat model, because
if the attacker can write to that path, the attack vector is even
larger.
Signed-off-by: aszlig <aszlig@nix.build>
This reduces the risk of object liveness misdetection. For example,
Glibc has an internal variable "mp_" that often points to a Boehm
object, keeping it alive unnecessarily. Since we don't store any
actual roots in global variables, we can just disable data segment
scanning.
With this, the max RSS doing 100 evaluations of
nixos.tests.firefox.x86_64-linux.drvPath went from 718 MiB to 455 MiB.
If the Env denotes a 'with', then values[0] may be an Expr* cast to a
Value*. For code that generically traverses Values/Envs, it's useful
to know this.
E.g. this makes
nix eval --restrict-eval -I /nix/store/foo '(builtins.readFile "/nix/store/foo/symlink/bla")'
(where /nix/store/foo/symlink is a symlink to another path in the
closure of /nix/store/foo) succeed.
This fixes a regression in Hydra compared to Nix 1.x (where there were
no restrictions at all on access to the Nix store).
builtins.path allows specifying the name of a path (which makes paths
with store-illegal names now addable), allows adding paths with flat
instead of recursive hashes, allows specifying a filter (so is a
generalization of filterSource), and allows specifying an expected
hash (enabling safe path adding in pure mode).
In this mode, the following restrictions apply:
* The builtins currentTime, currentSystem and storePath throw an
error.
* $NIX_PATH and -I are ignored.
* fetchGit and fetchMercurial require a revision hash.
* fetchurl and fetchTarball require a sha256 attribute.
* No file system access is allowed outside of the paths returned by
fetch{Git,Mercurial,url,Tarball}. Thus 'nix build -f ./foo.nix' is
not allowed.
Thus, the evaluation result is completely reproducible from the
command line arguments. E.g.
nix build --pure-eval '(
let
nix = fetchGit { url = https://github.com/NixOS/nixpkgs.git; rev = "9c927de4b179a6dd210dd88d34bda8af4b575680"; };
nixpkgs = fetchGit { url = https://github.com/NixOS/nixpkgs.git; ref = "release-17.09"; rev = "66b4de79e3841530e6d9c6baf98702aa1f7124e4"; };
in (import (nix + "/release.nix") { inherit nix nixpkgs; }).build.x86_64-linux
)'
The goal is to enable completely reproducible and traceable
evaluation. For example, a NixOS configuration could be fully
described by a single Git commit hash. 'nixos-rebuild' would do
something like
nix build --pure-eval '(
(import (fetchGit { url = file:///my-nixos-config; rev = "..."; })).system
')
where the Git repository /my-nixos-config would use further fetchGit
calls or Git externals to fetch Nixpkgs and whatever other
dependencies it has. Either way, the commit hash would uniquely
identify the NixOS configuration and allow it to reproduced.
Functions like copyClosure() had 3 bool arguments, which creates a
severe risk of mixing up arguments.
Also, implement copyClosure() using copyPaths().
Previously, the Settings class allowed other code to query for string
properties, which led to a proliferation of code all over the place making
up new options without any sort of central registry of valid options. This
commit pulls all those options back into the central Settings class and
removes the public get() methods, to discourage future abuses like that.
Furthermore, because we know the full set of options ahead of time, we
now fail loudly if someone enters an unrecognized option, thus preventing
subtle typos. With some template fun, we could probably also dump the full
set of options (with documentation, defaults, etc.) to the command line,
but I'm not doing that yet here.
Previously, all derivation attributes had to be coerced into strings
so that they could be passed via the environment. This is lossy
(e.g. lists get flattened, necessitating configureFlags
vs. configureFlagsArray, of which the latter cannot be specified as an
attribute), doesn't support attribute sets at all, and has size
limitations (necessitating hacks like passAsFile).
This patch adds a new mode for passing attributes to builders, namely
encoded as a JSON file ".attrs.json" in the current directory of the
builder. This mode is activated via the special attribute
__structuredAttrs = true;
(The idea is that one day we can set this in stdenv.mkDerivation.)
For example,
stdenv.mkDerivation {
__structuredAttrs = true;
name = "foo";
buildInputs = [ pkgs.hello pkgs.cowsay ];
doCheck = true;
hardening.format = false;
}
results in a ".attrs.json" file containing (sans the indentation):
{
"buildInputs": [],
"builder": "/nix/store/ygl61ycpr2vjqrx775l1r2mw1g2rb754-bash-4.3-p48/bin/bash",
"configureFlags": [
"--with-foo",
"--with-bar=1 2"
],
"doCheck": true,
"hardening": {
"format": false
},
"name": "foo",
"nativeBuildInputs": [
"/nix/store/10h6li26i7g6z3mdpvra09yyf10mmzdr-hello-2.10",
"/nix/store/4jnvjin0r6wp6cv1hdm5jbkx3vinlcvk-cowsay-3.03"
],
"propagatedBuildInputs": [],
"propagatedNativeBuildInputs": [],
"stdenv": "/nix/store/f3hw3p8armnzy6xhd4h8s7anfjrs15n2-stdenv",
"system": "x86_64-linux"
}
"passAsFile" is ignored in this mode because it's not needed - large
strings are included directly in the JSON representation.
It is up to the builder to do something with the JSON
representation. For example, in bash-based builders, lists/attrsets of
string values could be mapped to bash (associative) arrays.
The implementation of "partition" in Nixpkgs is O(n^2) (because of the
use of ++), and for some reason was causing stack overflows in
multi-threaded evaluation (not sure why).
This reduces "nix-env -qa --drv-path" runtime by 0.197s and memory
usage by 298 MiB (in non-Boehm mode).
Normally it's impossible to take a reference to the function passed to
callFunction, so some callers (e.g. ExprApp::eval) allocate that value
on the stack. For functors, a reference to the functor itself may be
kept, so we need to have it on the heap.
Fixes#1045
That is, unless --file is specified, the Nix search path is
synthesized into an attribute set. Thus you can say
$ nix build nixpkgs.hello
assuming $NIX_PATH contains an entry of the form "nixpkgs=...". This
is more verbose than
$ nix build hello
but is less ambiguous.
Thus, -I / $NIX_PATH entries are now downloaded only when they are
needed for evaluation. An error to download an entry is a non-fatal
warning (just like non-existant paths).
This does change the semantics of builtins.nixPath, which now returns
the original, rather than resulting path. E.g., before we had
[ { path = "/nix/store/hgm3yxf1lrrwa3z14zpqaj5p9vs0qklk-nixexprs.tar.xz"; prefix = "nixpkgs"; } ... ]
but now
[ { path = "https://nixos.org/channels/nixos-16.03/nixexprs.tar.xz"; prefix = "nixpkgs"; } ... ]
Fixes#792.
Also, move a few free-standing functions into StoreAPI and Derivation.
Also, introduce a non-nullable smart pointer, ref<T>, which is just a
wrapper around std::shared_ptr ensuring that the pointer is never
null. (For reference-counted values, this is better than passing a
"T&", because the latter doesn't maintain the refcount. Usually, the
caller will have a shared_ptr keeping the value alive, but that's not
always the case, e.g., when passing a reference to a std::thread via
std::bind.)
For example, "${{ foo = "bar"; __toString = x: x.foo; }}" evaluates
to "bar".
With this, we can delay calling functions like mkDerivation,
buildPythonPackage, etc. until we actually need a derivation, enabling
overrides and other modifications to happen by simple attribute set
update.
The value pointers of lists with 1 or 2 elements are now stored in the
list value itself. In particular, this makes the "concatMap (x: if
cond then [(f x)] else [])" idiom cheaper.
This modification moves Attr and Bindings structures into their own header
file which is dedicated to the attribute set representation. The goal of to
isolate pieces of code which are related to the attribute set
representation. Thus future modifications of the attribute set
representation will only have to modify these files, and not every other
file across the evaluator.
This relaxes restricted mode to allow access to anything in the
store. In the future, it would be better to allow access to only paths
that have been constructed in the current evaluation (so a hard-coded
/nix/store/blabla in a Nix expression would still be
rejected). However, note that reading /nix/store itself is still
rejected, so you can't use this so get access to things you don't know
about.
If ‘--option restrict-eval true’ is given, the evaluator will throw an
exception if an attempt is made to access any file outside of the Nix
search path. This is primarily intended for Hydra, where we don't want
people doing ‘builtins.readFile ~/.ssh/id_dsa’ or stuff like that.
Code that links to libnixexpr (e.g. plugins loaded with importNative, or
nix-exec) may want to provide custom value types and operations on
values of those types. For example, nix-exec is currently using sets
where a custom IO value type would be more appropriate. This commit
provides a generic hook for such types in the form of tExternal and the
ExternalBase virtual class, which contains all functions necessary for
libnixexpr's type-polymorphic functions (e.g. `showType`) to be
implemented.
With this, attribute sets with a `__functor` attribute can be applied
just like normal functions. This can be used to attach arbitrary
metadata to a function without callers needing to treat it specially.
Clearing v.app.right was not enough, because the length field of a
list only takes 32 bits, so the most significant 32 bits of v.app.left
(a.k.a. v.thunk.env) would remain. This could cause Boehm GC to
interpret it as a valid pointer.
This change reduces maximum RSS for evaluating the ‘tested’ job in
nixos/release-small.nix from 1.33 GiB to 0.80 GiB, and runtime by
about 8%.
It's slower than ExprVar since it doesn't compute a static
displacement. Since we're not using the throw primop in the
implementation of <...> anymore, it's also not really needed.
This allows error messages like:
error: the anonymous function at `/etc/nixos/configuration.nix:1:1'
called without required argument `foo', at
`/nix/var/nix/profiles/per-user/root/channels/nixos/nixpkgs/lib/modules.nix:77:59'
If we're evaluating some application ‘v = f x’, we can't store ‘f’
temporarily in ‘v’, because if ‘f x’ refers to ‘v’, it will get ‘f’
rather than an infinite recursion error.
Unfortunately, this breaks the tail call optimisation introduced in
c897bac549.
Fixes#217.
This doesn't change any functionality but moves some behavior out of the
parser and into the evaluator in order to simplify the code.
Signed-off-by: Shea Levy <shea@shealevy.com>
This adds new syntax for attribute names:
* attrs."${name}" => getAttr name attrs
* attrs ? "${name}" => isAttrs attrs && hasAttr attrs name
* attrs."${name}" or def => if attrs ? "${name}" then attrs."${name}" else def
* { "${name}" = value; } => listToAttrs [{ inherit name value; }]
Of course, it's a bit more complicated than that. The attribute chains
can be arbitrarily long and contain combinations of static and dynamic
parts (e.g. attrs."${foo}".bar."${baz}" or qux), which is relatively
straightforward for the getAttrs/hasAttrs cases but is more complex for
the listToAttrs case due to rules about duplicate attribute definitions.
For attribute sets with dynamic attribute names, duplicate static
attributes are detected at parse time while duplicate dynamic attributes
are detected when the attribute set is forced. So, for example, { a =
null; a.b = null; "${"c"}" = true; } will be a parse-time error, while
{ a = {}; "${"a"}".b = null; c = true; } will be an eval-time error
(technically that case could theoretically be detected at parse time,
but the general case would require full evaluation). Moreover, duplicate
dynamic attributes are not allowed even in cases where they would be
with static attributes ({ a.b.d = true; a.b.c = false; } is legal, but {
a."${"b"}".d = true; a."${"b"}".c = false; } is not). This restriction
might be relaxed in the future in cases where the static variant would
not be an error, but it is not obvious that that is desirable.
Finally, recursive attribute sets with dynamic attributes have the
static attributes in scope but not the dynamic ones. So rec { a = true;
"${"b"}" = a; } is equivalent to { a = true; b = true; } but rec {
"${"a"}" = true; b = a; } would be an error or use a from the
surrounding scope if it exists.
Note that the getAttr, getAttr or default, and hasAttr are all
implemented purely in the parser as syntactic sugar, while attribute
sets with dynamic attribute names required changes to the AST to be
implemented cleanly.
This is an alternative solution to and closes#167
Signed-off-by: Shea Levy <shea@shealevy.com>
Certain desugaring schemes may require the parser to use some builtin
function to do some of the work (e.g. currently `throw` is used to
lazily cause an error if a `<>`-style path is not in the search path)
Unfortunately, these names are not reserved keywords, so an expression
that uses such a syntactic sugar will not see the expected behavior
(see tests/lang/eval-okay-redefine-builtin.nix for an example).
This adds the ExprBuiltin AST type, which when evaluated uses the value
from the rootmost variable scope (which of course is initialized
internally and can't shadow any of the builtins).
Signed-off-by: Shea Levy <shea@shealevy.com>
Note that adding --show-trace prevents functions calls from being
tail-recursive, so an expression that evaluates without --show-trace
may fail with a stack overflow if --show-trace is given.
Messages like
while evaluating the attribute `outPath' at `/nix/store/212ngf4ph63mp6p1np2bapkfikpakfv7-nix-1.6/share/nix/corepkgs/derivation.nix:18:9':
are redundant, because Nix already shows that it's evaluating a derivation:
while instantiating the derivation named `firefox-24.0' at `/home/eelco/Dev/nixpkgs/pkgs/applications/networking/browsers/firefox/default.nix:131:5':
while evaluating the derivation attribute `nativeBuildInputs' at `/home/eelco/Dev/nixpkgs/pkgs/stdenv/generic/default.nix:76:17':
Commit 159e621d1a accidentally changed
the behaviour of antiquoted paths, e.g.
"${/foo}/bar"
used to evaluate to "/nix/store/<hash>-foo/bar" (where /foo gets
copied to the store), but in Nix 1.6 it evaluates to "/foo/bar". This
is inconsistent, since
" ${/foo}/bar"
evaluates to " /nix/store/<hash>-foo/bar". So revert to the old
behaviour.
Previously, a undefined variable inside a "with" caused an EvalError
(which can be caught), while outside, it caused a ParseError (which
cannot be caught). Now both cause an UndefinedVarError (which cannot
be caught).
Since they don't have location information, they just give you crap
like:
while evaluating the builtin function `getAttr':
while evaluating the builtin function `derivationStrict':
...
If a "with" attribute set fails to evaluate, we have to make sure its
Env record remains unchanged. Otherwise, repeated evaluation gives a
segfault:
nix-repl> :a with 0; { a = x; b = x; }
Added 2 variables.
nix-repl> a
error: value is an integer while an attribute set was expected
nix-repl> b
Segmentation fault
Since we already cache files in normal form (fileEvalCache), caching
parse trees is redundant.
Note that getting rid of this cache doesn't actually save much memory
at the moment, because parse trees are currently not freed / GC'ed.
This reduces the difference between inherited and non-inherited
attribute handling to the choice of which env to use (in recs and lets)
by setting the AttrDef::e to a new ExprVar in the parser rather than
carrying a separate AttrDef::v VarRef member.
As an added bonus, this allows inherited attributes that inherit from a
with to delay forcing evaluation of the with's attributes.
Signed-off-by: Shea Levy <shea@shealevy.com>
Commit 20866a7031 added a ‘withAttrs’
field to Env, which is annoying because it makes every Env structure
bigger and we allocate millions of them. E.g. NixOS evaluation took
18 MiB more. So this commit squeezes ‘withAttrs’ into values[0].
Probably should use a union...
Evaluation of attribute sets is strict in the attribute names, which
means immediate evaluation of `with` attribute sets rules out some
potentially interesting use cases (e.g. where the attribute names of one
set depend in some way on another but we want to bring those names into
scope for some values in the second set).
The major example of this is overridable self-referential package sets
(e.g. all-packages.nix). With immediate `with` evaluation, the only
options for such sets are to either make them non-recursive and
explicitly use the name of the overridden set in non-overridden one
every time you want to reference another package, or make the set
recursive and use the `__overrides` hack. As shown in the test case that
comes with this commit, though, delayed `with` evaluation allows a nicer
third alternative.
Signed-off-by: Shea Levy <shea@shealevy.com>
Functions in Nix are anonymous, but if they're assigned to a
variable/attribute, we can use the variable/attribute name in error
messages, e.g.
while evaluating `concatMapStrings' at `/nix/var/nix/profiles/per-user/root/channels/nixos/nixpkgs/pkgs/lib/strings.nix:18:25':
...
Wacky string coercion semantics caused expressions like
exec = "${./my-script} params...";
to evaluate to a path (‘/path/my-script params’), because
anti-quotations are desuged to string concatenation:
exec = ./my-script + " params...";
By constrast, adding a space at the start would yield a string as
expected:
exec = " ${./my-script} params...";
Now the first example also evaluates to a string.
We now print all output paths of a package, e.g.
openssl-1.0.0i bin=/nix/store/gq2mvh0wb9l90djvsagln3aqywqmr6vl-openssl-1.0.0i-bin;man=/nix/store/7zwf5r5hsdarl3n86dasvb4chm2xzw9n-openssl-1.0.0i-man;/nix/store/cj7xvk7fjp9q887359j75pw3pzjfmqf1-openssl-1.0.0i
or (in XML mode)
<item attrPath="openssl" name="openssl-1.0.0i" system="x86_64-linux">
<output name="bin" path="/nix/store/gq2mvh0wb9l90djvsagln3aqywqmr6vl-openssl-1.0.0i-bin" />
<output name="man" path="/nix/store/7zwf5r5hsdarl3n86dasvb4chm2xzw9n-openssl-1.0.0i-man" />
<output name="out" path="/nix/store/cj7xvk7fjp9q887359j75pw3pzjfmqf1-openssl-1.0.0i" />
</item>
This allows adding attributes like
attr = if stdenv.system == "bla" then something else null;
without changing the resulting derivation on non-<bla> platforms.
We once considered adding a special "ignore" value for this purpose,
but using null seems more elegant.
More precisely, in concatLists, if all lists except one are empty,
then just return the non-empty list. This reduces the number of list
element allocations by 32% when evaluating a NixOS system
configuration.
This can serve as a generic efficient list builder. For instance, the
function ‘catAttrs’ in Nixpkgs can be rewritten from
attr: l: fold (s: l: if hasAttr attr s then [(getAttr attr s)] ++ l else l) [] l
to
attr: l: builtins.concatLists (map (s: if hasAttr attr s then [(getAttr attr s)] else []) l)
Statistics before:
time elapsed: 1.08683
size of a value: 24
environments allocated: 1384376 (35809568 bytes)
list elements: 6946783 (55574264 bytes)
list concatenations: 37434
values allocated: 1760440 (42250560 bytes)
attribute sets allocated: 392040
right-biased unions: 186334
values copied in right-biased unions: 591137
symbols in symbol table: 18273
number of thunks: 1297673
number of thunks avoided: 1380759
number of attr lookups: 430802
number of primop calls: 628912
number of function calls: 1333544
Statistics after (including new catAttrs):
time elapsed: 0.959854
size of a value: 24
environments allocated: 1010198 (26829296 bytes)
list elements: 1984878 (15879024 bytes)
list concatenations: 30488
values allocated: 1589760 (38154240 bytes)
attribute sets allocated: 392040
right-biased unions: 186334
values copied in right-biased unions: 591137
symbols in symbol table: 18274
number of thunks: 1040925
number of thunks avoided: 1038428
number of attr lookups: 438419
number of primop calls: 474844
number of function calls: 959366
Evaluation of a NixOS configuration spends quite a lot of time in the
"filter" function in Nixpkgs. As implemented in Nixpkgs, this is a
O(n^2) operation, so it's a good candidate for providing a more
efficient (i.e. primop) implementation. Using it gives a ~10% speed
increase and a significant reduction in the number of evaluations.
Statistics before (on a NixOS system config):
time elapsed: 1.3258
size of a value: 24
environments allocated: 1980939 (50127080 bytes)
list elements: 14679308 (117434464 bytes)
list concatenations: 50828
values allocated: 2098938 (50374512 bytes)
attribute sets allocated: 392040
right-biased unions: 186334
values copied in right-biased unions: 591137
symbols in symbol table: 18271
number of thunks: 1645752
number of thunks avoided: 1921196
number of attr lookups: 430798
number of primop calls: 838807
number of function calls: 1930107
Statistics after:
time elapsed: 1.17982
size of a value: 24
environments allocated: 1543334 (39624560 bytes)
list elements: 9612638 (76901104 bytes)
list concatenations: 37434
values allocated: 1854933 (44518392 bytes)
attribute sets allocated: 392040
right-biased unions: 186334
values copied in right-biased unions: 591137
symbols in symbol table: 18272
number of thunks: 1392467
number of thunks avoided: 1507311
number of attr lookups: 430801
number of primop calls: 691600
number of function calls: 1492502
Setting the environment variable NIX_COUNT_CALLS to 1 enables some
basic profiling in the evaluator. It will count calls to functions
and primops as well as evaluations of attributes.
For example, to see where evaluation of a NixOS configuration spends
its time:
$ NIX_SHOW_STATS=1 NIX_COUNT_CALLS=1 ./src/nix-instantiate/nix-instantiate '<nixos>' -A system --readonly-mode
...
calls to 39 primops:
239532 head
233962 tail
191252 hasAttr
...
calls to 1595 functions:
224157 `/nix/var/nix/profiles/per-user/root/channels/nixos/nixpkgs/pkgs/lib/lists.nix:17:19'
221767 `/nix/var/nix/profiles/per-user/root/channels/nixos/nixpkgs/pkgs/lib/lists.nix:17:14'
221767 `/nix/var/nix/profiles/per-user/root/channels/nixos/nixpkgs/pkgs/lib/lists.nix:17:10'
...
evaluations of 7088 attributes:
167377 undefined position
132459 `/nix/var/nix/profiles/per-user/root/channels/nixos/nixpkgs/pkgs/lib/attrsets.nix:119:41'
47322 `/nix/var/nix/profiles/per-user/root/channels/nixos/nixpkgs/pkgs/lib/attrsets.nix:13:21'
...
