This further continues with the dependency inverstion. Also I just went
ahead and exposed `parseDerivation`: it seems like the more proper
building block, and not a bad thing to expose if we are trying to be
less wedded to drv files on disk anywas.
On nix-env -qa -f '<nixpkgs>', this reduces maximum RSS by 20970 KiB
and runtime by 0.8%. This is mostly because we're not parsing the hash
part as a hash anymore (just validating that it consists of base-32
characters).
Also, replace storePathToHash() by StorePath::hashPart().
This function was used in only one place, where it could easily be
replaced by readDerivation() since it's not
performance-critical. (This function appears to have been modelled
after queryDerivationOutputs(), which exists only to make the garbage
collector faster.)
This fixes an issue where lockfile generation was not idempotent:
after updating a lockfile, a "follows" node would end up pointing to a
new copy of the node, rather than to the original node.
fetchTarball, fetchTree, and fetchGit all have *optional* hash attrs.
This means that we need to be careful with what we allow to avoid
accidentally making these defaults. When ‘hash = ""’ we assume the
empty hash is wanted.
follow up of https://github.com/NixOS/nix/pull/3544
This allows hash="" so that it can be used for debugging purposes. For
instance, this gives you an error message like:
warning: found empty hash, assuming you wanted 'sha256:0000000000000000000000000000000000000000000000000000'
hash mismatch in fixed-output derivation '/nix/store/asx6qw1r1xk6iak6y6jph4n58h4hdmbm-nix':
wanted: sha256:0000000000000000000000000000000000000000000000000000
got: sha256:0fpfhipl9v1mfzw2ffmxiyyzqwlkvww22bh9wcy4qrfslb4jm429
Needed so that we can include it as a logger in loggers.cc without
adding a dependency on nix
This also requires moving names.hh to libutil to prevent a circular
dependency between libmain and libexpr
The initial contents of the flake is specified by the
'templates.<name>' or 'defaultTemplate' output of another flake. E.g.
outputs = { self }: {
templates = {
nixos-container = {
path = ./nixos-container;
description = "An example of a NixOS container";
};
};
};
allows
$ nix flake init -t templates#nixos-container
Also add a command 'nix flake new', which is identical to 'nix flake
init' except that it initializes a specified directory rather than the
current directory.
Instead, `Hash` uses `std::optional<HashType>`. In the future, we may
also make `Hash` itself require a known hash type, encoraging people to
use `std::optional<Hash>` instead.
Caches tree in addition to lockedRef, and explicitly writes out the logic for different combinations of cached/uncached flakes and indirect/resolved/locked flakes. This eliminates uneccessary calls to lookupInFlakeCache, fetchTree, maybeLookupFlake, and flakeCache.push_back
The attributes previously stored in TreeInfo (narHash, revCount,
lastModified) are now stored in Input. This makes it less arbitrary
what attributes are stored where.
As a result, the lock file format has changed. An entry like
"info": {
"lastModified": 1585405475,
"narHash": "sha256-bESW0n4KgPmZ0luxvwJ+UyATrC6iIltVCsGdLiphVeE="
},
"locked": {
"owner": "NixOS",
"repo": "nixpkgs",
"rev": "b88ff468e9850410070d4e0ccd68c7011f15b2be",
"type": "github"
},
is now stored as
"locked": {
"owner": "NixOS",
"repo": "nixpkgs",
"rev": "b88ff468e9850410070d4e0ccd68c7011f15b2be",
"type": "github",
"lastModified": 1585405475,
"narHash": "sha256-bESW0n4KgPmZ0luxvwJ+UyATrC6iIltVCsGdLiphVeE="
},
The 'Input' class is now a dumb set of attributes. All the fetcher
implementations subclass InputScheme, not Input. This simplifies the
API.
Also, fix substitution of flake inputs. This was broken since lazy
flake fetching started using fetchTree internally.
In particular, doing 'nix build /path/to/dir' now works if
/path/to/dir is not a Git tree (it only has to contain a flake.nix
file).
Also, 'nix flake init' no longer requires a Git tree (but it will do a
'git add flake.nix' if it's a Git tree)
Future editions of flakes or the Nix language can be supported by
renaming flake.nix (e.g. flake-v2.nix). This avoids a bootstrap
problem where we don't know which grammar to use to parse
flake*.nix. It also allows a project to support multiple flake
editions, in theory.
This provides a pluggable mechanism for defining new fetchers. It adds
a builtin function 'fetchTree' that generalizes existing fetchers like
'fetchGit', 'fetchMercurial' and 'fetchTarball'. 'fetchTree' takes a
set of attributes, e.g.
fetchTree {
type = "git";
url = "https://example.org/repo.git";
ref = "some-branch";
rev = "abcdef...";
}
The existing fetchers are just wrappers around this. Note that the
input attributes to fetchTree are the same as flake input
specifications and flake lock file entries.
All fetchers share a common cache stored in
~/.cache/nix/fetcher-cache-v1.sqlite. This replaces the ad hoc caching
mechanisms in fetchGit and download.cc (e.g. ~/.cache/nix/{tarballs,git-revs*}).
This also adds support for Git worktrees (c169ea5904).
This is useful for finding out what a registry lookup resolves to, e.g
$ nix flake info patchelf
Resolved URL: github:NixOS/patchelf
Locked URL: github:NixOS/patchelf/cd7955af31698c571c30b7a0f78e59fd624d0229
When we do something like 'nix flake update --override-input nixpkgs
...', the override is now kept on subsequent calls. (If you don't want
this behaviour, you can use --no-write-lock-file.)
This allows querying the location of function arguments. E.g.
builtins.unsafeGetAttrPos "x" (builtins.functionArgs ({ x }: null))
=> { column = 57; file = "/home/infinisil/src/nix/inst/test.nix"; line = 1; }
Using std::filesystem means also having to link with -lstdc++fs on
some platforms and it's hard to discover for what platforms this is
needed. As all the functionality is already implemented as utilities,
use those instead.
Due to fetchGit not checking if rev is an ancestor of ref (there is even
a FIXME comment about it in the code), the cache repo might not have the
ref even though it has the rev. This doesn't matter when submodule =
false, but the submodule = true code blows up because it tries to fetch
the (missing) ref from the cache repo.
Fix this in the simplest way possible: fetch all refs from the local
cache repo when submodules = true.
TODO: Add tests.
The .link file is used as a lock, so I think we should put the
"submodule" attribute in there since turning on submodules creates a new
.link file path.
This is now done in a single pass. Also fixes some issues when
updating flakes with circular dependencies. Finally, when using
'--recreate-lock-file --commit-lock-file', the commit message now
correctly shows the differences.
See documentattion in header and comments in implementation for details.
This is actually done in preparation for floating ca derivations, not
multi-output fixed ca derivations, but the distinction doesn't yet
mattter.
Thanks @cole-h for finding and fixing a bunch of typos.
If you do a fetchTree on a Git repository, whether the result contains
a revCount attribute should not depend on whether that repository
happens to be a shallow clone or not. That would complicate caching a
lot and would be semantically messy. So applying fetchTree/fetchGit to
a shallow repository is now an error unless you pass the attribute
'shallow = true'. If 'shallow = true', we don't return revCount, even
if the repository is not actually shallow.
Note that Nix itself is not doing shallow clones at the moment. But it
could do so as an optimisation if the user specifies 'shallow = true'.
Issue #2988.
This allows all supported fetchers to be used, e.g.
builtins.fetchTree {
type = "github";
owner = "NixOS";
repo = "nix";
rev = "d4df99a3349cf2228a8ee78dea320afef86eb3ba";
}
This improves reproducibility and may be faster than fetching from the
original source (especially for git/hg inputs, but probably also for
github inputs - our binary cache is probably faster than GitHub's
dynamically generated tarballs).
Unfortunately this doesn't work for the top-level flake since even if
we know the NAR hash of the tree, we don't know the other tree
attributes such as revCount and lastModified.
Fixes#3253.
Typical usage:
$ nix flake update ~/Misc/eelco-configurations/hagbard --update-input nixpkgs
to update the 'nixpkgs' input of a flake while leaving every other
input unchanged.
The argument is an input path, so you can do e.g. '--update-input
dwarffs/nixpkgs' to update an input of an input.
Fixes#2928.
Added a flag --no-update-lock-file to barf if the lock file needs any
changes. This is useful for CI systems if you're building a
checkout. Fixes#2947.
Renamed --no-save-lock-file to --no-write-lock-file. It is now a fatal
error if the lock file needs changes but --no-write-lock-file is not
given.
E.g.
$ nix flake update ~/Misc/eelco-configurations/hagbard \
--override-input 'dwarffs/nixpkgs' ../my-nixpkgs
overrides the 'nixpkgs' input of the 'dwarffs' input of the top-level
flake.
Fixes#2837.
When computing a lock file, we now respect the lock files of flake
inputs. This is important for usability / reproducibility. For
example, the 'nixops' flake depends on the 'nixops-aws' and
'nixops-hetzner' repositories. So when the 'nixops' flake is used in
another flake, we want the versions of 'nixops-aws' and
'nixops-hetzner' locked by the the 'nixops' flake because those
presumably have been tested.
This can lead to a proliferation of versions of flakes like 'nixpkgs'
(since every flake's lock file could depend on a different version of
'nixpkgs'). This is not a major issue when using Nixpkgs overlays or
NixOS modules, since then the top-level flake composes those
overlays/modules into *its* version of Nixpkgs and all other versions
are ignored. Lock file computation has been made a bit more lazy so it
won't try to fetch all those versions of 'nixpkgs'.
However, in case it's necessary to minimize flake versions, there now
are two input attributes that allow this. First, you can copy an input
from another flake, as follows:
inputs.nixpkgs.follows = "dwarffs/nixpkgs";
This states that the calling flake's 'nixpkgs' input shall be the same
as the 'nixpkgs' input of the 'dwarffs' input.
Second, you can override inputs of inputs:
inputs.nixpkgs.url = github:edolstra/nixpkgs/<hash>;
inputs.nixops.inputs.nixpkgs.url = github:edolstra/nixpkgs/<hash>;
or equivalently, using 'follows':
inputs.nixpkgs.url = github:edolstra/nixpkgs/<hash>;
inputs.nixops.inputs.nixpkgs.follows = "nixpkgs";
This states that the 'nixpkgs' input of the 'nixops' input shall be
the same as the calling flake's 'nixpkgs' input.
Finally, at '-v' Nix now prints the changes to the lock file, e.g.
$ nix flake update ~/Misc/eelco-configurations/hagbard
inputs of flake 'git+file:///home/eelco/Misc/eelco-configurations?subdir=hagbard' changed:
updated 'nixpkgs': 'github:edolstra/nixpkgs/7845bf5f4b3013df1cf036e9c9c3a55a30331db9' -> 'github:edolstra/nixpkgs/03f3def66a104a221aac8b751eeb7075374848fd'
removed 'nixops'
removed 'nixops/nixops-aws'
removed 'nixops/nixops-hetzner'
removed 'nixops/nixpkgs'
Fixes
error: derivation '/nix/store/klivma7r7h5lndb99f7xxmlh5whyayvg-zlib-1.2.11.drv' has incorrect output '/nix/store/fv98nnx5ykgbq8sqabilkgkbc4169q05-zlib-1.2.11-dev', should be '/nix/store/adm7pilzlj3z5k249s8b4wv3scprhzi1-zlib-1.2.11-dev'
Includes the expression of the condition in the assertion message if
the assertion failed, making assertions much easier to debug. eg.
error: assertion (withPython -> (python2Packages != null)) failed at pkgs/tools/security/nmap/default.nix:11:1
As fromTOML supports \u and \U escapes, bring fromJSON on par. As JSON defaults
to UTF-8 encoding (every JSON parser must support UTF-8), this change parses the
`\u hex hex hex hex` sequence (\u followed by 4 hexadecimal digits) into an
UTF-8 representation.
Add a test to verify correct parsing, using all escape sequences from json.org.
This prevents them from being inlined. On gcc 9, this reduces the
stack size needed for
nix-instantiate '<nixpkgs>' -A texlive.combined.scheme-full --dry-run
from 12.9 MiB to 4.8 MiB.
There is no termination condition for evaluation of cyclical
expression paths which can lead to infinite loops. This addresses
one spot in the parser in a similar fashion as utils.cc/canonPath
does.
This issue can be reproduced by something like:
```
ln -s a b
ln -s b a
nix-instantiate -E 'import ./a'
```
Most functions now take a StorePath argument rather than a Path (which
is just an alias for std::string). The StorePath constructor ensures
that the path is syntactically correct (i.e. it looks like
<store-dir>/<base32-hash>-<name>). Similarly, functions like
buildPaths() now take a StorePathWithOutputs, rather than abusing Path
by adding a '!<outputs>' suffix.
Note that the StorePath type is implemented in Rust. This involves
some hackery to allow Rust values to be used directly in C++, via a
helper type whose destructor calls the Rust type's drop()
function. The main issue is the dynamic nature of C++ move semantics:
after we have moved a Rust value, we should not call the drop function
on the original value. So when we move a value, we set the original
value to bitwise zero, and the destructor only calls drop() if the
value is not bitwise zero. This should be sufficient for most types.
Also lots of minor cleanups to the C++ API to make it more modern
(e.g. using std::optional and std::string_view in some places).
The FunctionCallTrace object consumes a few hundred bytes of stack
space, even when tracing is disabled. This was causing stack overflows:
$ nix-instantiate '<nixpkgs> -A texlive.combined.scheme-full --dry-run
error: stack overflow (possible infinite recursion)
This is with the default stack size of 8 MiB.
Putting the object on the heap reduces stack usage to < 5 MiB.
Also, fetchGit now runs in O(1) memory since we pipe the output of
'git archive' directly into unpackTarball() (rather than first reading
it all into memory).
E.g.
$ nix-build '<nixpkgs>' -A hello --experimental-features no-url-literals
error: URL literals are disabled, at /nix/store/vsjamkzh15r3c779q2711az826hqgvzr-nixpkgs-20.03pre194957.bef773ed53f/nixpkgs/pkgs/top-level/all-packages.nix:1236:11
Helps with implementing https://github.com/NixOS/rfcs/pull/45.
The store path is not enough. For example, when we build a dirty tree,
commit, and build the clean tree, a re-evaluation is necessary because
the flake may depend on the lastModified or revCount attributes.
Add missing docstring on InstallableCommand. Also, some of these were wrapped
when they're right next to a line longer than the unwrapped line, so we can just
unwrap them to save vertical space.
git show seems to print the entire tag message when being called on a tag
instead of a commit. git log instead always prints the correct timestamp
in my tests.
The error nix prints is: `error: stoull`.
Fixes
error: the content hash of flake '/home/eelco/Dev/nixpkgs-flake?ref=HEAD&rev=0000000000000000000000000000000000000000' doesn't match the hash recorded in the referring lockfile
Experimental features are now opt-in. There are currently two
experimental features: "nix-command" (which enables the "nix"
command), and "flakes" (which enables support for flakes). This will
allow us to merge experimental features more quickly, without
committing to supporting them indefinitely.
Typical usage:
$ nix build --experimental-features 'nix-command flakes' nixpkgs#hello
In particular, when building a flake lock file, inputs like 'nixpkgs'
are now downloaded only once. Previously, it would fetch
https://api.github.com/repos/<owner>/<repo>/tarball/<ref> and then
later https://api.github.com/repos/<owner>/<repo>/tarball/<rev>, even
though they produce the same result.
Git and GitHub now also share a cache that maps revs to a store path
and other info.
Fixes
$ nix build
fatal: bad revision 'HEAD'
error: program 'git' failed with exit code 128
on a new flake. It is now detected as a dirty tree with revCount = 0.
For example, if the top-level flake depends on
"nixpkgs/release-19.03", and one of its dependencies depends on
"nixpkgs", then the latter will be mapped to "nixpkgs/release-19.03",
rather than whatever the default branch of "nixpkgs" is. Thus you get
only one "nixpkgs" dependency rather than two.
This currently only works in a breadth-first way, so the other way
around (i.e. if the top-level flake depends on "nixpkgs", and a
dependency depends on "nixpkgs/release-19.03") still results in two
"nixpkgs" dependencies.
If 'input.<name>.uri' changes, then the entry in the lockfile for
input <name> should be considered stale.
Also print some messages when lock file entries are added/updated.
So you now get
$ nix build
error: path '.' is not a flake (because it does not reference a Git repository)
rather than
$ nix build
error: unsupported argument '.'
Instead of a list, inputs are now an attrset like
inputs = {
nixpkgs.uri = github:NixOS/nixpkgs;
};
If 'uri' is omitted, than the flake is a lookup in the flake registry, e.g.
inputs = {
nixpkgs = {};
};
but in that case, you can also just omit the input altogether and
specify it as an argument to the 'outputs' function, as in
outputs = { self, nixpkgs }: ...
This also gets rid of 'nonFlakeInputs', which are now just a special
kind of input that have a 'flake = false' attribute, e.g.
inputs = {
someRepo = {
uri = github:example/repo;
flake = false;
};
};
With this patch, and this file I called `log.py`:
#!/usr/bin/env nix-shell
#!nix-shell -i python3 -p python3 --pure
import sys
from pprint import pprint
stack = []
timestack = []
for line in open(sys.argv[1]):
components = line.strip().split(" ", 2)
if components[0] != "function-trace":
continue
direction = components[1]
components = components[2].rsplit(" ", 2)
loc = components[0]
_at = components[1]
time = int(components[2])
if direction == "entered":
stack.append(loc)
timestack.append(time)
elif direction == "exited":
dur = time - timestack.pop()
vst = ";".join(stack)
print(f"{vst} {dur}")
stack.pop()
and:
nix-instantiate --trace-function-calls -vvvv ../nixpkgs/pkgs/top-level/release.nix -A unstable > log.matthewbauer 2>&1
./log.py ./log.matthewbauer > log.matthewbauer.folded
flamegraph.pl --title matthewbauer-post-pr log.matthewbauer.folded > log.matthewbauer.folded.svg
I can make flame graphs like: http://gsc.io/log.matthewbauer.folded.svg
---
Includes test cases around function call failures and tryEval. Uses
RAII so the finish is always called at the end of the function.
--no-net causes tarballTtl to be set to the largest 32-bit integer,
which causes comparison like 'time + tarballTtl < other_time' to
fail on 32-bit systems. So cast them to 64-bit first.
https://hydra.nixos.org/build/95076624
(cherry picked from commit 29ccb2e969)
Also, make fetchGit and fetchMercurial update allowedPaths properly.
(Maybe the evaluator, rather than the caller of the evaluator, should
apply toRealPath(), but that's a bigger change.)
(cherry picked from commit 5c34d66538)
--no-net causes tarballTtl to be set to the largest 32-bit integer,
which causes comparison like 'time + tarballTtl < other_time' to
fail on 32-bit systems. So cast them to 64-bit first.
https://hydra.nixos.org/build/95076624
This exploits the hermetic nature of flake evaluation to speed up
repeated evaluations of a flake output attribute.
For example (doing 'nix build' on an already present package):
$ time nix build nixpkgs:firefox
real 0m1.497s
user 0m1.160s
sys 0m0.139s
$ time nix build nixpkgs:firefox
real 0m0.052s
user 0m0.038s
sys 0m0.007s
The cache is ~/.cache/nix/eval-cache-v1.sqlite, which has entries like
INSERT INTO Attributes VALUES(
X'92a907d4efe933af2a46959b082cdff176aa5bfeb47a98fabd234809a67ab195',
'packages.firefox',
1,
'/nix/store/pbalzf8x19hckr8cwdv62rd6g0lqgc38-firefox-67.0.drv /nix/store/g6q0gx0v6xvdnizp8lrcw7c4gdkzana0-firefox-67.0 out');
where the hash 92a9... is a fingerprint over the flake store path and
the contents of the lockfile. Because flakes are evaluated in pure
mode, this uniquely identifies the evaluation result.
As long as the flake input is locked, it is now only fetched when it
is evaluated (e.g. "nixpkgs" is fetched when
"inputs.nixpkgs.<something>" is evaluated).
This required adding an "id" attribute to the members of "inputs" in
lockfiles, e.g.
"inputs": {
"nixpkgs/release-19.03": {
"id": "nixpkgs",
"inputs": {},
"narHash": "sha256-eYtxncIMFVmOHaHBtTdPGcs/AnJqKqA6tHCm0UmPYQU=",
"nonFlakeInputs": {},
"uri": "github:edolstra/nixpkgs/e9d5882bb861dc48f8d46960e7c820efdbe8f9c1"
}
}
because the flake ID needs to be known beforehand to construct the
"inputs" attrset.
Fixes#2913.
This is primarily useful for version string generation, where we need
a monotonically increasing number. The revcount is the preferred thing
to use, but isn't available for GitHub flakes (since it requires
fetching the entire history). The last commit timestamp OTOH can be
extracted from GitHub tarballs.
This ensures that flakes don't get garbage-collected, which is
important to get nix-channel-like behaviour.
For example, running
$ nix build hydra:
will create a GC root
~/.cache/nix/flake-closures/hydra -> /nix/store/xarfiqcwa4w8r4qpz1a769xxs8c3phgn-flake-closure
where the contents/references of the linked file in the store are the
flake source trees used by the 'hydra' flake:
/nix/store/n6d5f5lkpfjbmkyby0nlg8y1wbkmbc7i-source
/nix/store/vbkg4zy1qd29fnhflsv9k2j9jnbqd5m2-source
/nix/store/z46xni7d47s5wk694359mq9ay353ar94-source
Note that this in itself is not enough to allow offline use; the
fetcher for the flakeref (e.g. fetchGit or downloadCached) must not
fail if it cannot fetch the latest version of the file, so long as it
knows a cached version.
Issue #2868.
It was getting confused between logical and real store paths.
Also, make fetchGit and fetchMercurial update allowedPaths properly.
(Maybe the evaluator, rather than the caller of the evaluator, should
apply toRealPath(), but that's a bigger change.)
For text files it is possible to do it like so:
`builtins.hashString "sha256" (builtins.readFile /tmp/a)`
but that doesn't work for binary files.
With builtins.hashFile any kind of file can be conveniently hashed.
This ensures that the lock file is updated *before* evaluating it, and
that it gets updated for any nix command, not just 'nix build'.
Also, while computing the lock file, allow arbitrary registry lookups,
not just at top-level.
Also, improve some error messages slightly.
Also allow "." as an installable to refer to the flake in the current
directory. E.g.
$ nix build .
will build 'provides.defaultPackage' in the flake in the current
directory.
Unlike file://<path>, this allows the path to be a dirty Git tree, so
nix build /path/to/flake:attr
is a convenient way to test building a local flake.
The general syntax for an installable is now
<flakeref>:<attrpath>. The attrpath is relative to the flake's
'provides.packages' or 'provides' if the former doesn't yield a
result. E.g.
$ nix build nixpkgs:hello
is equivalent to
$ nix build nixpkgs:packages.hello
Also, '<flakeref>:' can be omitted, in which case it defaults to
'nixpkgs', e.g.
$ nix build hello
This allows using an arbitrary "provides" attribute from the specified
flake. For example:
nix build --flake nixpkgs packages.hello
(Maybe provides.packages should be used for consistency...)
We want to encourage a brave new world of hermetic evaluation for
source-level reproducibility, so flakes should not poke around in the
filesystem outside of their explicit dependencies.
Note that the default installation source remains impure in that it
can refer to mutable flakes, so "nix build nixpkgs.hello" still works
(and fetches the latest nixpkgs, unless it has been pinned by the
user).
A problem with pure evaluation is that builtins.currentSystem is
unavailable. For the moment, I've hard-coded "x86_64-linux" in the
nixpkgs flake. Eventually, "system" should be a flake function
argument.
For example, github:edolstra/dwarffs is more-or-less equivalent to
https://github.com/edolstra/dwarffs.git. It's a much faster way to get
GitHub repositories: it fetches tarballs rather than entire Git
repositories. It also allows fetching specific revisions by hash
without specifying a ref (e.g. a branch name):
github:edolstra/dwarffs/41c0c1bf292ea3ac3858ff393b49ca1123dbd553
Previously, plain derivation paths in the string context (e.g. those
that arose from builtins.storePath on a drv file, not those that arose
from accessing .drvPath of a derivation) were treated somewhat like
derivaiton paths derived from .drvPath, except their dependencies
weren't recursively added to the input set. With this change, such
plain derivation paths are simply treated as paths and added to the
source inputs set accordingly, simplifying context handling code and
removing the inconsistency. If drvPath-like behavior is desired, the
.drv file can be imported and then .drvPath can be accessed.
This is a backwards-incompatibility, but storePath is never used on
drv files within nixpkgs and almost never used elsewhere.
Trying to fetch refs that are not in refs/heads currently fails because
it looks for refs/heads/refs/foo instead of refs/foo.
eg.
builtins.fetchGit {
url = https://github.com/NixOS/nixpkgs.git;
ref = "refs/pull/1024/head;
}
SRI hashes (https://www.w3.org/TR/SRI/) combine the hash algorithm and
a base-64 hash. This allows more concise and standard hash
specifications. For example, instead of
import <nix/fetchurl.nl> {
url = https://nixos.org/releases/nix/nix-2.1.3/nix-2.1.3.tar.xz;
sha256 = "5d22dad058d5c800d65a115f919da22938c50dd6ba98c5e3a183172d149840a4";
};
you can write
import <nix/fetchurl.nl> {
url = https://nixos.org/releases/nix/nix-2.1.3/nix-2.1.3.tar.xz;
hash = "sha256-XSLa0FjVyADWWhFfkZ2iKTjFDda6mMXjoYMXLRSYQKQ=";
};
In fixed-output derivations, the outputHashAlgo is no longer mandatory
if outputHash specifies the hash (either as an SRI or in the old
"<type>:<hash>" format).
'nix hash-{file,path}' now print hashes in SRI format by default. I
also reverted them to use SHA-256 by default because that's what we're
using most of the time in Nixpkgs.
Suggested by @zimbatm.
This is already done by coerceToString(), provided that the argument
is a path (e.g. 'fetchGit ./bla'). It fixes the handling of URLs like
git@github.com:owner/repo.git. It breaks 'fetchGit "./bla"', but that
was never intended to work anyway and is inconsistent with other
builtin functions (e.g. 'readFile "./bla"' fails).
Using a 64bit integer on 32bit systems will come with a bit of a
performance overhead, but given that Nix doesn't use a lot of integers
compared to other types, I think the overhead is negligible also
considering that 32bit systems are in decline.
The biggest advantage however is that when we use a consistent integer
size across all platforms it's less likely that we miss things that we
break due to that. One example would be:
https://github.com/NixOS/nixpkgs/pull/44233
On Hydra it will evaluate, because the evaluator runs on a 64bit
machine, but when evaluating the same on a 32bit machine it will fail,
so using 64bit integers should make that consistent.
While the change of the type in value.hh is rather easy to do, we have a
few more options available for doing the conversion in the lexer:
* Via an #ifdef on the architecture and using strtol() or strtoll()
accordingly depending on which architecture we are. For the #ifdef
we would need another AX_COMPILE_CHECK_SIZEOF in configure.ac.
* Using istringstream, which would involve copying the value.
* As we're already using boost, lexical_cast might be a good idea.
Spoiler: I went for the latter, first of all because lexical_cast does
have an overload for const char* and second of all, because it doesn't
involve copying around the input string. Also, because istringstream
seems to come with a bigger overhead than boost::lexical_cast:
https://www.boost.org/doc/libs/release/doc/html/boost_lexical_cast/performance.html
The first method (still using strtol/strtoll) also wasn't something I
pursued further, because it is also locale-aware which I doubt is what
we want, given that the regex for int is [0-9]+.
Signed-off-by: aszlig <aszlig@nix.build>
Fixes: #2339
The current usage technically works by putting multiple different
repos in to the same git directory. However, it is very slow as
Git tries very hard to find common commits between the two
repositories. If the two repositories are large (like Nixpkgs and
another long-running project,) it is maddeningly slow.
This change busts the cache for existing deployments, but users
will be promptly repaid in per-repository performance.
In EvalState::checkSourcePath, the path is checked against the list of
allowed paths first and later it's checked again *after* resolving
symlinks.
The resolving of the symlinks is done via canonPath, which also strips
out "../" and "./". However after the canonicalisation the error message
pointing out that the path is not allowed prints the symlink target in
the error message.
Even if we'd suppress the message, symlink targets could still be leaked
if the symlink target doesn't exist (in this case the error is thrown in
canonPath).
So instead, we now do canonPath() without symlink resolving first before
even checking against the list of allowed paths and then later do the
symlink resolving and checking the allowed paths again.
The first call to canonPath() should get rid of all the "../" and "./",
so in theory the only way to leak a symlink if the attacker is able to
put a symlink in one of the paths allowed by restricted evaluation mode.
For the latter I don't think this is part of the threat model, because
if the attacker can write to that path, the attack vector is even
larger.
Signed-off-by: aszlig <aszlig@nix.build>
forceValue() were called after a value is copied effectively forcing only one of the copies keeping another copy not evaluated.
This resulted in its evaluation of the same lazy value more than once (the number of hits is not big though)
This reduces the risk of object liveness misdetection. For example,
Glibc has an internal variable "mp_" that often points to a Boehm
object, keeping it alive unnecessarily. Since we don't store any
actual roots in global variables, we can just disable data segment
scanning.
With this, the max RSS doing 100 evaluations of
nixos.tests.firefox.x86_64-linux.drvPath went from 718 MiB to 455 MiB.
If the Env denotes a 'with', then values[0] may be an Expr* cast to a
Value*. For code that generically traverses Values/Envs, it's useful
to know this.
E.g. this makes
nix eval --restrict-eval -I /nix/store/foo '(builtins.readFile "/nix/store/foo/symlink/bla")'
(where /nix/store/foo/symlink is a symlink to another path in the
closure of /nix/store/foo) succeed.
This fixes a regression in Hydra compared to Nix 1.x (where there were
no restrictions at all on access to the Nix store).
Doing so prevents emacs tags from working, as well as makes the code extremely
confusing for a newbie.
In the prior state, if someone wants to find the definition of "ExprApp" for
example, a grep through the code reveals nothing. Since the definition could be
hiding in numerous ".h" files, it's really difficult to find. This personally
took me several hours to figure out.
Flex's regexes have an annoying feature: the dot matches everything
except a newline. This causes problems for expressions like:
"${0}\
"
where the backslash-newline combination matches this rule instead of the
intended one mentioned in the comment:
<STRING>\$|\\|\$\\ {
/* This can only occur when we reach EOF, otherwise the above
(...|\$[^\{\"\\]|\\.|\$\\.)+ would have triggered.
This is technically invalid, but we leave the problem to the
parser who fails with exact location. */
return STR;
}
However, the parser actually accepts the resulting token sequence
('"' DOLLAR_CURLY 0 '}' STR '"'), which is a problem because the lexer
rule didn't assign anything to yylval. Ultimately this leads to a crash
when dereferencing a NULL pointer in ExprConcatStrings::bindVars().
The fix does change the syntax of the language in some corner cases
but I think it's only turning previously invalid (or crashing) syntax
to valid syntax. E.g.
"a\
b"
and
''a''\
b''
were previously syntax errors but now both result in "a\nb".
Found by afl-fuzz.
Otherwise, running e.g.
nix-instantiate --eval -E --strict 'builtins.replaceStrings [""] ["X"] "abc"'
would just hang in an infinite loop.
Found by afl-fuzz.
First attempt of this was reverted in e2d71bd186 because it caused
another infinite loop, which is fixed now and a test added.
Otherwise, running e.g.
nix-instantiate --eval -E --strict 'builtins.replaceStrings [""] ["X"] "abc"'
would just hang in an infinite loop.
Found by afl-fuzz.
Instead of having lexicographicOrder() create a temporary sorted array
of Attr*:s and copying attr names from that, copy the attr names
first and then sort that.
builtins.path allows specifying the name of a path (which makes paths
with store-illegal names now addable), allows adding paths with flat
instead of recursive hashes, allows specifying a filter (so is a
generalization of filterSource), and allows specifying an expected
hash (enabling safe path adding in pure mode).
In this mode, the following restrictions apply:
* The builtins currentTime, currentSystem and storePath throw an
error.
* $NIX_PATH and -I are ignored.
* fetchGit and fetchMercurial require a revision hash.
* fetchurl and fetchTarball require a sha256 attribute.
* No file system access is allowed outside of the paths returned by
fetch{Git,Mercurial,url,Tarball}. Thus 'nix build -f ./foo.nix' is
not allowed.
Thus, the evaluation result is completely reproducible from the
command line arguments. E.g.
nix build --pure-eval '(
let
nix = fetchGit { url = https://github.com/NixOS/nixpkgs.git; rev = "9c927de4b179a6dd210dd88d34bda8af4b575680"; };
nixpkgs = fetchGit { url = https://github.com/NixOS/nixpkgs.git; ref = "release-17.09"; rev = "66b4de79e3841530e6d9c6baf98702aa1f7124e4"; };
in (import (nix + "/release.nix") { inherit nix nixpkgs; }).build.x86_64-linux
)'
The goal is to enable completely reproducible and traceable
evaluation. For example, a NixOS configuration could be fully
described by a single Git commit hash. 'nixos-rebuild' would do
something like
nix build --pure-eval '(
(import (fetchGit { url = file:///my-nixos-config; rev = "..."; })).system
')
where the Git repository /my-nixos-config would use further fetchGit
calls or Git externals to fetch Nixpkgs and whatever other
dependencies it has. Either way, the commit hash would uniquely
identify the NixOS configuration and allow it to reproduced.
For example, you can write
src = fetchgit ./.;
and if ./. refers to an unclean working tree, that tree will be copied
to the Nix store. This removes the need for "cleanSource".
The computation of urlHash didn't take the name into account, so
subsequent fetchurl calls with the same URL but a different name would
resolve to the same cached store path.
The "name" attribute defaults to "source", which we should use for all
similar functions (e.g. fetchTarball and in Hydra) to ensure that we
get a consistent store path regardless of how the tree is fetched.
"source" is not necessarily a correct label, but using an empty name
is problematic: you get an ugly store path ending in a dash, and it's
impossible to have a fixed-output derivation that produces that path
because ".drv" is not a valid store name.
Fixes#904.
This check spuriously fails for e.g. git@github.com:NixOS/nixpkgs.git,
and even for ssh://git@github.com/NixOS/nixpkgs.git, and is made
redundant by the checks git itself will do when fetching the repo. We
instead pass a -- before passing the URI to git to avoid injection.
This adds an argument "rev" specififying the Git commit hash. The
existing argument "rev" is renamed to "ref". The default value for
"ref" is "master". When specifying a hash, it's necessary to specify a
ref since we're not cloning the entire repository but only fetching a
specific ref.
Example usage:
builtins.fetchgit {
url = https://github.com/NixOS/nixpkgs.git;
ref = "release-16.03";
rev = "c1c0484041ab6f9c6858c8ade80a8477c9ae4442";
};
Functions like copyClosure() had 3 bool arguments, which creates a
severe risk of mixing up arguments.
Also, implement copyClosure() using copyPaths().
There's no reason to restrict this to Error exceptions. This shouldn't
matter to #1407 since the repl doesn't catch non-Error exceptions
anyway, but you never know...
With catch-all rules, we hide potential errors.
It turns out that a4744254 made one cath-all useless. Flex detected that
is was impossible to reach.
The other is more subtle, as it can only trigger on unfinished escapes
in unfinished strings, which only occurs at EOF.
In particular, this disallows attribute names containing dots or
starting with dots. Hydra already disallowed these. This affects the
following packages in Nixpkgs master:
2048-in-terminal
2bwm
389-ds-base
90secondportraits
lispPackages.3bmd
lispPackages.hu.dwim.asdf
lispPackages.hu.dwim.def
Closes#1342.
Execute a given program with the (optional) given arguments as the
user running the evaluation, parsing stdout as an expression to be
evaluated.
There are many use cases for nix that would benefit from being able to
run arbitrary code during evaluation, including but not limited to:
* Automatic git fetching to get a sha256 from a git revision
* git rev-parse HEAD
* Automatic extraction of information from build specifications from
other tools, particularly language-specific package managers like
cabal or npm
* Secrets decryption (e.g. with nixops)
* Private repository fetching
Ideally, we would add this functionality in a more principled way to
nix, but in the mean time 'builtins.exec' can be used to get these
tasks done.
The primop is only available when the
'allow-unsafe-native-code-during-evaluation' nix option is true. That
flag also enables the 'importNative' primop, which is strictly more
powerful but less convenient (since it requires compiling a plugin
against the running version of nix).
Previously, the Settings class allowed other code to query for string
properties, which led to a proliferation of code all over the place making
up new options without any sort of central registry of valid options. This
commit pulls all those options back into the central Settings class and
removes the public get() methods, to discourage future abuses like that.
Furthermore, because we know the full set of options ahead of time, we
now fail loudly if someone enters an unrecognized option, thus preventing
subtle typos. With some template fun, we could probably also dump the full
set of options (with documentation, defaults, etc.) to the command line,
but I'm not doing that yet here.
Because config.h can #define things like _FILE_OFFSET_BITS=64 and not
every compilation unit includes config.h, we currently compile half of
Nix with _FILE_OFFSET_BITS=64 and other half with _FILE_OFFSET_BITS
unset. This causes major havoc with the Settings class on e.g. 32-bit ARM,
where different compilation units disagree with the struct layout.
E.g.:
diff --git a/src/libstore/globals.cc b/src/libstore/globals.cc
@@ -166,6 +166,8 @@ void Settings::update()
_get(useSubstitutes, "build-use-substitutes");
+ fprintf(stderr, "at Settings::update(): &useSubstitutes = %p\n", &nix::settings.useSubstitutes);
_get(buildUsersGroup, "build-users-group");
diff --git a/src/libstore/remote-store.cc b/src/libstore/remote-store.cc
+++ b/src/libstore/remote-store.cc
@@ -138,6 +138,8 @@ void RemoteStore::initConnection(Connection & conn)
void RemoteStore::setOptions(Connection & conn)
{
+ fprintf(stderr, "at RemoteStore::setOptions(): &useSubstitutes = %p\n", &nix::settings.useSubstitutes);
conn.to << wopSetOptions
Gave me:
at Settings::update(): &useSubstitutes = 0xb6e5c5cb
at RemoteStore::setOptions(): &useSubstitutes = 0xb6e5c5c7
That was not a fun one to debug!
Previously, all derivation attributes had to be coerced into strings
so that they could be passed via the environment. This is lossy
(e.g. lists get flattened, necessitating configureFlags
vs. configureFlagsArray, of which the latter cannot be specified as an
attribute), doesn't support attribute sets at all, and has size
limitations (necessitating hacks like passAsFile).
This patch adds a new mode for passing attributes to builders, namely
encoded as a JSON file ".attrs.json" in the current directory of the
builder. This mode is activated via the special attribute
__structuredAttrs = true;
(The idea is that one day we can set this in stdenv.mkDerivation.)
For example,
stdenv.mkDerivation {
__structuredAttrs = true;
name = "foo";
buildInputs = [ pkgs.hello pkgs.cowsay ];
doCheck = true;
hardening.format = false;
}
results in a ".attrs.json" file containing (sans the indentation):
{
"buildInputs": [],
"builder": "/nix/store/ygl61ycpr2vjqrx775l1r2mw1g2rb754-bash-4.3-p48/bin/bash",
"configureFlags": [
"--with-foo",
"--with-bar=1 2"
],
"doCheck": true,
"hardening": {
"format": false
},
"name": "foo",
"nativeBuildInputs": [
"/nix/store/10h6li26i7g6z3mdpvra09yyf10mmzdr-hello-2.10",
"/nix/store/4jnvjin0r6wp6cv1hdm5jbkx3vinlcvk-cowsay-3.03"
],
"propagatedBuildInputs": [],
"propagatedNativeBuildInputs": [],
"stdenv": "/nix/store/f3hw3p8armnzy6xhd4h8s7anfjrs15n2-stdenv",
"system": "x86_64-linux"
}
"passAsFile" is ignored in this mode because it's not needed - large
strings are included directly in the JSON representation.
It is up to the builder to do something with the JSON
representation. For example, in bash-based builders, lists/attrsets of
string values could be mapped to bash (associative) arrays.
On some architectures (like x86_64 or i686, but not ARM for example)
overflow during integer division causes a crash due to SIGFPE.
Reproduces on a 64-bit system with:
nix-instantiate --eval -E '(-9223372036854775807 - 1) / -1'
The only way this can happen is when the smallest possible integer is
divided by -1, so just special-case that.
The binary cache store can now use HTTP/2 to do lookups. This is much
more efficient than HTTP/1.1 due to multiplexing: we can issue many
requests in parallel over a single TCP connection. Thus it's no longer
necessary to use a bunch of concurrent TCP connections (25 by
default).
For example, downloading 802 .narinfo files from
https://cache.nixos.org/, using a single TCP connection, takes 11.8s
with HTTP/1.1, but only 0.61s with HTTP/2.
This did require a fairly substantial rewrite of the Downloader class
to use the curl multi interface, because otherwise curl wouldn't be
able to do multiplexing for us. As a bonus, we get connection reuse
even with HTTP/1.1. All downloads are now handled by a single worker
thread. Clients call Downloader::enqueueDownload() to tell the worker
thread to start the download, getting a std::future to the result.
The implementation of "partition" in Nixpkgs is O(n^2) (because of the
use of ++), and for some reason was causing stack overflows in
multi-threaded evaluation (not sure why).
This reduces "nix-env -qa --drv-path" runtime by 0.197s and memory
usage by 298 MiB (in non-Boehm mode).
Normally it's impossible to take a reference to the function passed to
callFunction, so some callers (e.g. ExprApp::eval) allocate that value
on the stack. For functors, a reference to the functor itself may be
kept, so we need to have it on the heap.
Fixes#1045
That is, unless --file is specified, the Nix search path is
synthesized into an attribute set. Thus you can say
$ nix build nixpkgs.hello
assuming $NIX_PATH contains an entry of the form "nixpkgs=...". This
is more verbose than
$ nix build hello
but is less ambiguous.
For example, you can now say:
configureFlags = "--prefix=${placeholder "out"} --includedir=${placeholder "dev"}";
The strings returned by the ‘placeholder’ builtin are replaced at
build time by the actual store paths corresponding to the specified
outputs.
Previously, you had to work around the inability to self-reference by doing stuff like:
preConfigure = ''
configureFlags+=" --prefix $out --includedir=$dev"
'';
or rely on ad-hoc variable interpolation semantics in Autoconf or Make
(e.g. --prefix=\$(out)), which doesn't always work.
E.g.
$ nix-build -I nixpkgs=git://github.com/NixOS/nixpkgs '<nixpkgs>' -A hello
This is not extremely useful yet because you can't specify a
branch/revision.
The function builtins.fetchgit fetches Git repositories at evaluation
time, similar to builtins.fetchTarball. (Perhaps the name should be
changed, being confusing with respect to Nixpkgs's fetchgit function,
with works at build time.)
Example:
(import (builtins.fetchgit git://github.com/NixOS/nixpkgs) {}).hello
or
(import (builtins.fetchgit {
url = git://github.com/NixOS/nixpkgs-channels;
rev = "nixos-16.03";
}) {}).hello
Note that the result does not contain a .git directory.
Thus, -I / $NIX_PATH entries are now downloaded only when they are
needed for evaluation. An error to download an entry is a non-fatal
warning (just like non-existant paths).
This does change the semantics of builtins.nixPath, which now returns
the original, rather than resulting path. E.g., before we had
[ { path = "/nix/store/hgm3yxf1lrrwa3z14zpqaj5p9vs0qklk-nixexprs.tar.xz"; prefix = "nixpkgs"; } ... ]
but now
[ { path = "https://nixos.org/channels/nixos-16.03/nixexprs.tar.xz"; prefix = "nixpkgs"; } ... ]
Fixes#792.
Also, move a few free-standing functions into StoreAPI and Derivation.
Also, introduce a non-nullable smart pointer, ref<T>, which is just a
wrapper around std::shared_ptr ensuring that the pointer is never
null. (For reference-counted values, this is better than passing a
"T&", because the latter doesn't maintain the refcount. Usually, the
caller will have a shared_ptr keeping the value alive, but that's not
always the case, e.g., when passing a reference to a std::thread via
std::bind.)
Also show types when nix cannot compare values of different types.
This is also more consistent since types are already shown when comparing values of the same not comparable type.
For example, "${{ foo = "bar"; __toString = x: x.foo; }}" evaluates
to "bar".
With this, we can delay calling functions like mkDerivation,
buildPythonPackage, etc. until we actually need a derivation, enabling
overrides and other modifications to happen by simple attribute set
update.
The value pointers of lists with 1 or 2 elements are now stored in the
list value itself. In particular, this makes the "concatMap (x: if
cond then [(f x)] else [])" idiom cheaper.
This ensures that 1) the derivation doesn't change when Nix changes;
2) the derivation closure doesn't contain Nix and its dependencies; 3)
we don't have to rely on ugly chroot hacks.
This modification moves Attr and Bindings structures into their own header
file which is dedicated to the attribute set representation. The goal of to
isolate pieces of code which are related to the attribute set
representation. Thus future modifications of the attribute set
representation will only have to modify these files, and not every other
file across the evaluator.
This relaxes restricted mode to allow access to anything in the
store. In the future, it would be better to allow access to only paths
that have been constructed in the current evaluation (so a hard-coded
/nix/store/blabla in a Nix expression would still be
rejected). However, note that reading /nix/store itself is still
rejected, so you can't use this so get access to things you don't know
about.
This is because we don't want to do HTTP requests on every evaluation,
even though we can prevent a full redownload via the cached ETag. The
default is one hour.
This function downloads and unpacks the given URL at evaluation
time. This is primarily intended to make it easier to deal with Nix
expressions that have external dependencies. For instance, to fetch
Nixpkgs 14.12:
with import (fetchTarball https://github.com/NixOS/nixpkgs-channels/archive/nixos-14.12.tar.gz) {};
Or to fetch a specific revision:
with import (fetchTarball 2766a4b44e.tar.gz) {};
This patch also adds a ‘fetchurl’ builtin that downloads but doesn't
unpack its argument. Not sure if it's useful though.
This doesn't work anymore if the "strict" chroot mode is
enabled. Instead, add Nix's store path as a dependency. This ensures
that its closure is present in the chroot.
If ‘--option restrict-eval true’ is given, the evaluator will throw an
exception if an attempt is made to access any file outside of the Nix
search path. This is primarily intended for Hydra, where we don't want
people doing ‘builtins.readFile ~/.ssh/id_dsa’ or stuff like that.
The DT_UNKNOWN fallback code was getting the type of the wrong path,
causing readDir to report "directory" as the type of every file.
Reported by deepfire on IRC.
Code that links to libnixexpr (e.g. plugins loaded with importNative, or
nix-exec) may want to provide custom value types and operations on
values of those types. For example, nix-exec is currently using sets
where a custom IO value type would be more appropriate. This commit
provides a generic hook for such types in the form of tExternal and the
ExternalBase virtual class, which contains all functions necessary for
libnixexpr's type-polymorphic functions (e.g. `showType`) to be
implemented.
The function ‘builtins.match’ takes a POSIX extended regular
expression and an arbitrary string. It returns ‘null’ if the string
does not match the regular expression. Otherwise, it returns a list
containing substring matches corresponding to parenthesis groups in
the regex. The regex must match the entire string (i.e. there is an
implied "^<pat>$" around the regex). For example:
match "foo" "foobar" => null
match "foo" "foo" => []
match "f(o+)(.*)" "foooobar" => ["oooo" "bar"]
match "(.*/)?([^/]*)" "/dir/file.nix" => ["/dir/" "file.nix"]
match "(.*/)?([^/]*)" "file.nix" => [null "file.nix"]
The following example finds all regular files with extension .nix or
.patch underneath the current directory:
let
findFiles = pat: dir: concatLists (mapAttrsToList (name: type:
if type == "directory" then
findFiles pat (dir + "/" + name)
else if type == "regular" && match pat name != null then
[(dir + "/" + name)]
else []) (readDir dir));
in findFiles ".*\\.(nix|patch)" (toString ./.)
Before this there was a bug where a `find` was being called on a
not-yet-sorted set. The code was just a mess before anyway, so I cleaned
it up while fixing it.
With this, attribute sets with a `__functor` attribute can be applied
just like normal functions. This can be used to attach arbitrary
metadata to a function without callers needing to treat it specially.
Clearing v.app.right was not enough, because the length field of a
list only takes 32 bits, so the most significant 32 bits of v.app.left
(a.k.a. v.thunk.env) would remain. This could cause Boehm GC to
interpret it as a valid pointer.
This change reduces maximum RSS for evaluating the ‘tested’ job in
nixos/release-small.nix from 1.33 GiB to 0.80 GiB, and runtime by
about 8%.
This can be used to import a dynamic shared object and return an
arbitrary value, including new primops. This can be used both to test
new primops without having to recompile nix every time, and to build
specialized primops that probably don't belong upstream (e.g. a function
that calls out to gpg to decrypt a nixops secret as-needed).
The imported function should initialize the Value & as needed. A single
import can define multiple values by creating an attrset or list, of
course.
An example initialization function might look like:
extern "C" void initialize(nix::EvalState & state, nix::Value & v)
{
v.type = nix::tPrimOp;
v.primOp = NEW nix::PrimOp(myFun, 1, state.symbols.create("myFun"));
}
Then `builtins.importNative ./example.so "initialize"` will evaluate to
the primop defined in the myFun function.
It's slower than ExprVar since it doesn't compute a static
displacement. Since we're not using the throw primop in the
implementation of <...> anymore, it's also not really needed.
Nix search path lookups like <nixpkgs> are now desugared to ‘findFile
nixPath <nixpkgs>’, where ‘findFile’ is a new primop. Thus you can
override the search path simply by saying
let
nixPath = [ { prefix = "nixpkgs"; path = "/my-nixpkgs"; } ];
in ... <nixpkgs> ...
In conjunction with ‘scopedImport’ (commit
c273c15cb1), the Nix search path can be
propagated across imports, e.g.
let
overrides = {
nixPath = [ ... ] ++ builtins.nixPath;
import = fn: scopedImport overrides fn;
scopedImport = attrs: fn: scopedImport (overrides // attrs) fn;
builtins = builtins // overrides;
};
in scopedImport overrides ./nixos
‘scopedImport’ works like ‘import’, except that it takes a set of
attributes to be added to the lexical scope of the expression,
essentially extending or overriding the builtin variables. For
instance, the expression
scopedImport { x = 1; } ./foo.nix
where foo.nix contains ‘x’, will evaluate to 1.
This has a few applications:
* It allows getting rid of function argument specifications in package
expressions. For instance, a package expression like:
{ stdenv, fetchurl, libfoo }:
stdenv.mkDerivation { ... buildInputs = [ libfoo ]; }
can now we written as just
stdenv.mkDerivation { ... buildInputs = [ libfoo ]; }
and imported in all-packages.nix as:
bar = scopedImport pkgs ./bar.nix;
So whereas we once had dependencies listed in three places
(buildInputs, the function, and the call site), they now only need
to appear in one place.
* It allows overriding builtin functions. For instance, to trace all
calls to ‘map’:
let
overrides = {
map = f: xs: builtins.trace "map called!" (map f xs);
# Ensure that our override gets propagated by calls to
# import/scopedImport.
import = fn: scopedImport overrides fn;
scopedImport = attrs: fn: scopedImport (overrides // attrs) fn;
# Also update ‘builtins’.
builtins = builtins // overrides;
};
in scopedImport overrides ./bla.nix
* Similarly, it allows extending the set of builtin functions. For
instance, during Nixpkgs/NixOS evaluation, the Nixpkgs library
functions could be added to the default scope.
There is a downside: calls to scopedImport are not memoized, unlike
import. So importing a file multiple times leads to multiple parsings
/ evaluations. It would be possible to construct the AST only once,
but that would require careful handling of variables/environments.
This allows error messages like:
error: the anonymous function at `/etc/nixos/configuration.nix:1:1'
called without required argument `foo', at
`/nix/var/nix/profiles/per-user/root/channels/nixos/nixpkgs/lib/modules.nix:77:59'
If we're evaluating some application ‘v = f x’, we can't store ‘f’
temporarily in ‘v’, because if ‘f x’ refers to ‘v’, it will get ‘f’
rather than an infinite recursion error.
Unfortunately, this breaks the tail call optimisation introduced in
c897bac549.
Fixes#217.
Fixes#121. Note that we don't warn about missing $NIX_PATH entries
because it's intended that some may be missing (cf. the default
$NIX_PATH on NixOS, which includes paths like /etc/nixos/nixpkgs for
backward compatibility).
Now, in addition to a."${b}".c, you can write a.${b}.c (applicable
wherever dynamic attributes are valid).
Signed-off-by: Shea Levy <shea@shealevy.com>
