keeping it as a simple data member means it won't be scanned by the GC, so
eventually the GC will collect a cache that is still referenced (resulting in
use-after-free of cache elements).
fixes#5962
- Make passing the position to `forceValue` mandatory,
this way we remember people that the position is
important for better error messages
- Add pos to all `forceValue` calls
if we defer the duplicate argument check for lambda formals we can use more
efficient data structures for the formals set, and we can get rid of the
duplication of formals names to boot. instead of a list of formals we've seen
and a set of names we'll keep a vector instead and run a sort+dupcheck step
before moving the parsed formals into a newly created lambda. this improves
performance on search and rebuild by ~1%, pure parsing gains more (about 4%).
this does reorder lambda arguments in the xml output, but the output is still
stable. this shouldn't be a problem since argument order is not semantically
important anyway.
before
nix search --no-eval-cache --offline ../nixpkgs hello
Time (mean ± σ): 8.550 s ± 0.060 s [User: 6.470 s, System: 1.664 s]
Range (min … max): 8.435 s … 8.666 s 20 runs
nix eval -f ../nixpkgs/pkgs/development/haskell-modules/hackage-packages.nix
Time (mean ± σ): 346.7 ms ± 2.1 ms [User: 312.4 ms, System: 34.2 ms]
Range (min … max): 343.8 ms … 353.4 ms 20 runs
nix eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
Time (mean ± σ): 2.720 s ± 0.031 s [User: 2.415 s, System: 0.231 s]
Range (min … max): 2.662 s … 2.780 s 20 runs
after
nix search --no-eval-cache --offline ../nixpkgs hello
Time (mean ± σ): 8.462 s ± 0.063 s [User: 6.398 s, System: 1.661 s]
Range (min … max): 8.339 s … 8.542 s 20 runs
nix eval -f ../nixpkgs/pkgs/development/haskell-modules/hackage-packages.nix
Time (mean ± σ): 329.1 ms ± 1.4 ms [User: 296.8 ms, System: 32.3 ms]
Range (min … max): 326.1 ms … 330.8 ms 20 runs
nix eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
Time (mean ± σ): 2.687 s ± 0.035 s [User: 2.392 s, System: 0.228 s]
Range (min … max): 2.626 s … 2.754 s 20 runs
there's a few symbols in primops we can create once and pick them out of
EvalState afterwards instead of creating them every time we need them. this
gives almost 1% speedup to an uncached nix search.
constructing an ostringstream for non-string concats (like integer addition) is
a small constant cost that we can avoid. for string concats we can keep all the
string temporaries we get from coerceToString and concatenate them in one go,
which saves a lot of intermediate temporaries and copies in ostringstream. we
can also avoid copying the concatenated string again by directly allocating it
in GC memory and moving ownership of the concatenated string into the target
value.
saves about 2% on system eval.
before:
Benchmark 1: nix eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
Time (mean ± σ): 2.837 s ± 0.031 s [User: 2.562 s, System: 0.191 s]
Range (min … max): 2.796 s … 2.892 s 20 runs
after:
Benchmark 1: nix eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
Time (mean ± σ): 2.790 s ± 0.035 s [User: 2.532 s, System: 0.187 s]
Range (min … max): 2.722 s … 2.836 s 20 runs
Previously you had to remember to call value->attrs->sort() after
populating value->attrs. Now there is a BindingsBuilder helper that
wraps Bindings and ensures that sort() is called before you can use
it.
calling GC_malloc for each value is significantly more expensive than
allocating a bunch of values at once with GC_malloc_many. "a bunch" here
is a GC block size, ie 16KiB or less.
this gives a 1.5% performance boost when evaluating our nixos system.
tested with
nix eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
# on master
Time (mean ± σ): 3.335 s ± 0.007 s [User: 2.774 s, System: 0.293 s]
Range (min … max): 3.315 s … 3.347 s 50 runs
# with this change
Time (mean ± σ): 3.288 s ± 0.006 s [User: 2.728 s, System: 0.292 s]
Range (min … max): 3.274 s … 3.307 s 50 runs
If we’re in pure eval mode, then tell that in the error message rather
than (wrongly) speaking about restricted mode.
Fix https://github.com/NixOS/nix/issues/5611
This is not really useful on its own, but it does recover the
'infinite recursion' error message for '{ __functor = x: x; } 1', and
is more efficient in conjunction with #3718.
Fixes#5515.
We now parse function applications as a vector of arguments rather
than as a chain of binary applications, e.g. 'substring 1 2 "foo"' is
parsed as
ExprCall { .fun = <substring>, .args = [ <1>, <2>, <"foo"> ] }
rather than
ExprApp (ExprApp (ExprApp <substring> <1>) <2>) <"foo">
This allows primops to be called immediately (if enough arguments are
supplied) without having to allocate intermediate tPrimOpApp values.
On
$ nix-instantiate --dry-run '<nixpkgs/nixos/release-combined.nix>' -A nixos.tests.simple.x86_64-linux
this gives a substantial performance improvement:
user CPU time: median = 0.9209 mean = 0.9218 stddev = 0.0073 min = 0.9086 max = 0.9340 [rejected, p=0.00000, Δ=-0.21433±0.00677]
elapsed time: median = 1.0585 mean = 1.0584 stddev = 0.0024 min = 1.0523 max = 1.0623 [rejected, p=0.00000, Δ=-0.20594±0.00236]
because it reduces the number of tPrimOpApp allocations from 551990 to
42534 (i.e. only small minority of primop calls are partially
applied) which in turn reduces time spent in the garbage collector.
Rather than having them plain strings scattered through the whole
codebase, create an enum containing all the known experimental features.
This means that
- Nix can now `warn` when an unkwown experimental feature is passed
(making it much nicer to spot typos and spot deprecated features)
- It’s now easy to remove a feature altogether (once the feature isn’t
experimental anymore or is dropped) by just removing the field for the
enum and letting the compiler point us to all the now invalid usages
of it.
The boolean is only used to determine if the formals are set to a
non-null pointer in all our cases. We can get rid of that allocation and
instead just compare the pointer value with NULL. Saving up to
sizeof(bool) + platform specific alignment per ExprLambda instace.
Probably not a lot of memory but perhaps a few kilobyte with nixpkgs?
This also gets rid of a potential issue with dereferencing formals based on
the value of the boolean that didn't have to be aligned with the formals
pointer but was in all our cases.
I found it somewhat confusing to have an error like
error: attribute 'getFlake' missing
if the required experimental-feature (`flakes`) is not enabled. Instead,
I'd expect Nix to throw an error just like it's the case when using e.g. `nix
flake` without `flakes` being enabled.
With this change, the error looks like this:
$ nix-instantiate -E 'builtins.getFlake "nixpkgs"'
error: Cannot call 'builtins.getFlake' because experimental Nix feature 'flakes' is disabled. You can enable it via '--extra-experimental-features flakes'.
at «string»:1:1:
1| builtins.getFlake "nixpkgs"
| ^
I didn't use `settings.requireExperimentalFeature` here on purpose
because this doesn't contain a position. Also, it doesn't seem as if we
need to catch the error and check for the missing feature here since
this already happens at evaluation time.
Previously, type or coercion errors for string interpolation, path
interpolation, and plus expressions were always reported at the
beginning of the outer expression. This leads to confusing evaluation
error messages making it hard to accurately diagnose and then fix the
error.
For example, errors were reported as follows.
```
cannot coerce an integer to a string
1| let foo = 7; in "bar" + foo
| ^
cannot add a string to an integer
1| let foo = "bar"; in 4 + foo
| ^
cannot coerce an integer to a string
1| let foo = 7; in "x${foo}"
| ^
```
This commit changes the ExprConcatStrings expression vector to store a
sequence of expressions *and* their expansion locations so that error
locations can be reported accurately. For interpolation, the error is
reported at the beginning of the entire `${foo}`, not at the beginning
of `foo` because I thought this was slightly clearer. The previous
errors are now reported as:
```
cannot coerce an integer to a string
1| let foo = 7; in "bar" + foo
| ^
cannot add a string to an integer
1| let foo = "bar"; in 4 + foo
| ^
cannot coerce an integer to a string
1| let foo = 7; in "x${foo}"
| ^
```
The error is reported at this kind of precise location even for
multi-line indented strings.
This probably helps with at least some of the cases mentioned in #561
This fixes a class of crashes and introduces ptr<T> to make the
code robust against this failure mode going forward.
Thanks regnat for the idea of a ref<T> without overhead!
Closes#4895Closes#4893Closes#5127Closes#5113
When working on some more complex Nix code, there are sometimes rather
unhelpful or misleading error messages, especially if coerce-errors are
thrown.
This patch is a first steps towards improving that. I'm happy to file
more changes after that, but I'd like to gather some feedback first.
To summarize, this patch does the following things:
* Attrsets (a.k.a. `Bindings` in `libexpr`) now have a `Pos`. This is
helpful e.g. to identify which attribute-set in `listToAttrs` is
invalid.
* The `Value`-struct has a new method named `determinePos` which tries
to guess the position of a value and falls back to a default if that's
not possible.
This can be used to provide better messages if a coercion fails.
* The new `determinePos`-API is used by `builtins.concatMap` now. With
that change, Nix shows the exact position in the error where a wrong
value was returned by the lambda.
To make sure it's still obvious that `concatMap` is the problem,
another stack-frame was added.
* The changes described above can be added to every other `primop`, but
first I'd like to get some feedback about the overall approach.
Changes:
* The divider lines are gone. These were in practice a bit confusing,
in particular with --show-trace or --keep-going, since then there
were multiple lines, suggesting a start/end which wasn't the case.
* Instead, multi-line error messages are now indented to align with
the prefix (e.g. "error: ").
* The 'description' field is gone since we weren't really using it.
* 'hint' is renamed to 'msg' since it really wasn't a hint.
* The error is now printed *before* the location info.
* The 'name' field is no longer printed since most of the time it
wasn't very useful since it was just the name of the exception (like
EvalError). Ideally in the future this would be a unique, easily
googleable error ID (like rustc).
* "trace:" is now just "…". This assumes error contexts start with
something like "while doing X".
Example before:
error: --- AssertionError ---------------------------------------------------------------------------------------- nix
at: (7:7) in file: /home/eelco/Dev/nixpkgs/pkgs/applications/misc/hello/default.nix
6|
7| x = assert false; 1;
| ^
8|
assertion 'false' failed
----------------------------------------------------- show-trace -----------------------------------------------------
trace: while evaluating the attribute 'x' of the derivation 'hello-2.10'
at: (192:11) in file: /home/eelco/Dev/nixpkgs/pkgs/stdenv/generic/make-derivation.nix
191| // (lib.optionalAttrs (!(attrs ? name) && attrs ? pname && attrs ? version)) {
192| name = "${attrs.pname}-${attrs.version}";
| ^
193| } // (lib.optionalAttrs (stdenv.hostPlatform != stdenv.buildPlatform && !dontAddHostSuffix && (attrs ? name || (attrs ? pname && attrs ? version)))) {
Example after:
error: assertion 'false' failed
at: (7:7) in file: /home/eelco/Dev/nixpkgs/pkgs/applications/misc/hello/default.nix
6|
7| x = assert false; 1;
| ^
8|
… while evaluating the attribute 'x' of the derivation 'hello-2.10'
at: (192:11) in file: /home/eelco/Dev/nixpkgs/pkgs/stdenv/generic/make-derivation.nix
191| // (lib.optionalAttrs (!(attrs ? name) && attrs ? pname && attrs ? version)) {
192| name = "${attrs.pname}-${attrs.version}";
| ^
193| } // (lib.optionalAttrs (stdenv.hostPlatform != stdenv.buildPlatform && !dontAddHostSuffix && (attrs ? name || (attrs ? pname && attrs ? version)))) {
Move clearValue inside Value
mkInt instead of setInt
mkBool instead of setBool
mkString instead of setString
mkPath instead of setPath
mkNull instead of setNull
mkAttrs instead of setAttrs
mkList instead of setList*
mkThunk instead of setThunk
mkApp instead of setApp
mkLambda instead of setLambda
mkBlackhole instead of setBlackhole
mkPrimOp instead of setPrimOp
mkPrimOpApp instead of setPrimOpApp
mkExternal instead of setExternal
mkFloat instead of setFloat
Add note that the static mk* function should be removed eventually
Crucially this introduces BoehmGCStackAllocator, but it also
adds a bunch of wiring to avoid making libutil depend on bdw-gc.
Part of the solutions for #4178, #4200
Otherwise the result of the printing can't be parsed back correctly by
Nix (because the unescaped `${` will be parsed as the begining of an
anti-quotation).
Fix#3989
The change in 626200713b didn't account
for when the number of auto arguments is bigger than the number of
formal arguments. This causes the following:
$ nix-instantiate --eval -E '{ ... }@args: args.foo' --argstr foo foo
nix-instantiate: src/libexpr/attr-set.hh:55: void nix::Bindings::push_back(const nix::Attr&): Assertion `size_ < capacity_' failed.
Aborted (core dumped)
The command line options --arg and --argstr that are used by a bunch of
CLI commands to pass arguments to top-level functions in files go
through the same code-path as auto-calling top-level functions with
their default arguments - this, however, was only passing the arguments
that were *explicitly* mentioned in the formals of the function - in the
case of an as-pattern with an ellipsis (eg args @ { ... }) extra passed
arguments would get omitted. This fixes that to instead pass *all*
specified auto args in the case that our function has an ellipsis.
Fixes#598
This allows interactively inspecting the state of the evaluator at the
point of failure.
Example:
$ nix eval path:///home/eelco/Dev/nix/flake2#modules.hello-closure._final --start-repl-on-eval-errors
error: --- TypeError -------------------------------------------------------------------------------------------------------------------------------------------------------------------- nix
at: (20:53) in file: /nix/store/4264z41dxfdiqr95svmpnxxxwhfplhy0-source/flake.nix
19|
20| _final = builtins.foldl' (xs: mod: xs // (mod._module.config { config = _final; })) _defaults _allModules;
| ^
21| };
attempt to call something which is not a function but a set
Starting REPL to allow you to inspect the current state of the evaluator.
The following extra variables are in scope: arg, fun
Welcome to Nix version 2.4. Type :? for help.
nix-repl> fun
error: --- EvalError -------------------------------------------------------------------------------------------------------------------------------------------------------------------- nix
at: (150:28) in file: /nix/store/4264z41dxfdiqr95svmpnxxxwhfplhy0-source/flake.nix
149|
150| tarballClosure = (module {
| ^
151| extends = [ self.modules.derivation ];
attribute 'derivation' missing
nix-repl> :t fun
a set
nix-repl> builtins.attrNames fun
[ "tarballClosure" ]
nix-repl>
If you do a fetchTree on a Git repository, whether the result contains
a revCount attribute should not depend on whether that repository
happens to be a shallow clone or not. That would complicate caching a
lot and would be semantically messy. So applying fetchTree/fetchGit to
a shallow repository is now an error unless you pass the attribute
'shallow = true'. If 'shallow = true', we don't return revCount, even
if the repository is not actually shallow.
Note that Nix itself is not doing shallow clones at the moment. But it
could do so as an optimisation if the user specifies 'shallow = true'.
Issue #2988.
Includes the expression of the condition in the assertion message if
the assertion failed, making assertions much easier to debug. eg.
error: assertion (withPython -> (python2Packages != null)) failed at pkgs/tools/security/nmap/default.nix:11:1
This prevents them from being inlined. On gcc 9, this reduces the
stack size needed for
nix-instantiate '<nixpkgs>' -A texlive.combined.scheme-full --dry-run
from 12.9 MiB to 4.8 MiB.
Most functions now take a StorePath argument rather than a Path (which
is just an alias for std::string). The StorePath constructor ensures
that the path is syntactically correct (i.e. it looks like
<store-dir>/<base32-hash>-<name>). Similarly, functions like
buildPaths() now take a StorePathWithOutputs, rather than abusing Path
by adding a '!<outputs>' suffix.
Note that the StorePath type is implemented in Rust. This involves
some hackery to allow Rust values to be used directly in C++, via a
helper type whose destructor calls the Rust type's drop()
function. The main issue is the dynamic nature of C++ move semantics:
after we have moved a Rust value, we should not call the drop function
on the original value. So when we move a value, we set the original
value to bitwise zero, and the destructor only calls drop() if the
value is not bitwise zero. This should be sufficient for most types.
Also lots of minor cleanups to the C++ API to make it more modern
(e.g. using std::optional and std::string_view in some places).
The FunctionCallTrace object consumes a few hundred bytes of stack
space, even when tracing is disabled. This was causing stack overflows:
$ nix-instantiate '<nixpkgs> -A texlive.combined.scheme-full --dry-run
error: stack overflow (possible infinite recursion)
This is with the default stack size of 8 MiB.
Putting the object on the heap reduces stack usage to < 5 MiB.
With this patch, and this file I called `log.py`:
#!/usr/bin/env nix-shell
#!nix-shell -i python3 -p python3 --pure
import sys
from pprint import pprint
stack = []
timestack = []
for line in open(sys.argv[1]):
components = line.strip().split(" ", 2)
if components[0] != "function-trace":
continue
direction = components[1]
components = components[2].rsplit(" ", 2)
loc = components[0]
_at = components[1]
time = int(components[2])
if direction == "entered":
stack.append(loc)
timestack.append(time)
elif direction == "exited":
dur = time - timestack.pop()
vst = ";".join(stack)
print(f"{vst} {dur}")
stack.pop()
and:
nix-instantiate --trace-function-calls -vvvv ../nixpkgs/pkgs/top-level/release.nix -A unstable > log.matthewbauer 2>&1
./log.py ./log.matthewbauer > log.matthewbauer.folded
flamegraph.pl --title matthewbauer-post-pr log.matthewbauer.folded > log.matthewbauer.folded.svg
I can make flame graphs like: http://gsc.io/log.matthewbauer.folded.svg
---
Includes test cases around function call failures and tryEval. Uses
RAII so the finish is always called at the end of the function.
In EvalState::checkSourcePath, the path is checked against the list of
allowed paths first and later it's checked again *after* resolving
symlinks.
The resolving of the symlinks is done via canonPath, which also strips
out "../" and "./". However after the canonicalisation the error message
pointing out that the path is not allowed prints the symlink target in
the error message.
Even if we'd suppress the message, symlink targets could still be leaked
if the symlink target doesn't exist (in this case the error is thrown in
canonPath).
So instead, we now do canonPath() without symlink resolving first before
even checking against the list of allowed paths and then later do the
symlink resolving and checking the allowed paths again.
The first call to canonPath() should get rid of all the "../" and "./",
so in theory the only way to leak a symlink if the attacker is able to
put a symlink in one of the paths allowed by restricted evaluation mode.
For the latter I don't think this is part of the threat model, because
if the attacker can write to that path, the attack vector is even
larger.
Signed-off-by: aszlig <aszlig@nix.build>
This reduces the risk of object liveness misdetection. For example,
Glibc has an internal variable "mp_" that often points to a Boehm
object, keeping it alive unnecessarily. Since we don't store any
actual roots in global variables, we can just disable data segment
scanning.
With this, the max RSS doing 100 evaluations of
nixos.tests.firefox.x86_64-linux.drvPath went from 718 MiB to 455 MiB.
If the Env denotes a 'with', then values[0] may be an Expr* cast to a
Value*. For code that generically traverses Values/Envs, it's useful
to know this.
E.g. this makes
nix eval --restrict-eval -I /nix/store/foo '(builtins.readFile "/nix/store/foo/symlink/bla")'
(where /nix/store/foo/symlink is a symlink to another path in the
closure of /nix/store/foo) succeed.
This fixes a regression in Hydra compared to Nix 1.x (where there were
no restrictions at all on access to the Nix store).
builtins.path allows specifying the name of a path (which makes paths
with store-illegal names now addable), allows adding paths with flat
instead of recursive hashes, allows specifying a filter (so is a
generalization of filterSource), and allows specifying an expected
hash (enabling safe path adding in pure mode).
In this mode, the following restrictions apply:
* The builtins currentTime, currentSystem and storePath throw an
error.
* $NIX_PATH and -I are ignored.
* fetchGit and fetchMercurial require a revision hash.
* fetchurl and fetchTarball require a sha256 attribute.
* No file system access is allowed outside of the paths returned by
fetch{Git,Mercurial,url,Tarball}. Thus 'nix build -f ./foo.nix' is
not allowed.
Thus, the evaluation result is completely reproducible from the
command line arguments. E.g.
nix build --pure-eval '(
let
nix = fetchGit { url = https://github.com/NixOS/nixpkgs.git; rev = "9c927de4b179a6dd210dd88d34bda8af4b575680"; };
nixpkgs = fetchGit { url = https://github.com/NixOS/nixpkgs.git; ref = "release-17.09"; rev = "66b4de79e3841530e6d9c6baf98702aa1f7124e4"; };
in (import (nix + "/release.nix") { inherit nix nixpkgs; }).build.x86_64-linux
)'
The goal is to enable completely reproducible and traceable
evaluation. For example, a NixOS configuration could be fully
described by a single Git commit hash. 'nixos-rebuild' would do
something like
nix build --pure-eval '(
(import (fetchGit { url = file:///my-nixos-config; rev = "..."; })).system
')
where the Git repository /my-nixos-config would use further fetchGit
calls or Git externals to fetch Nixpkgs and whatever other
dependencies it has. Either way, the commit hash would uniquely
identify the NixOS configuration and allow it to reproduced.
Functions like copyClosure() had 3 bool arguments, which creates a
severe risk of mixing up arguments.
Also, implement copyClosure() using copyPaths().
Previously, the Settings class allowed other code to query for string
properties, which led to a proliferation of code all over the place making
up new options without any sort of central registry of valid options. This
commit pulls all those options back into the central Settings class and
removes the public get() methods, to discourage future abuses like that.
Furthermore, because we know the full set of options ahead of time, we
now fail loudly if someone enters an unrecognized option, thus preventing
subtle typos. With some template fun, we could probably also dump the full
set of options (with documentation, defaults, etc.) to the command line,
but I'm not doing that yet here.
Previously, all derivation attributes had to be coerced into strings
so that they could be passed via the environment. This is lossy
(e.g. lists get flattened, necessitating configureFlags
vs. configureFlagsArray, of which the latter cannot be specified as an
attribute), doesn't support attribute sets at all, and has size
limitations (necessitating hacks like passAsFile).
This patch adds a new mode for passing attributes to builders, namely
encoded as a JSON file ".attrs.json" in the current directory of the
builder. This mode is activated via the special attribute
__structuredAttrs = true;
(The idea is that one day we can set this in stdenv.mkDerivation.)
For example,
stdenv.mkDerivation {
__structuredAttrs = true;
name = "foo";
buildInputs = [ pkgs.hello pkgs.cowsay ];
doCheck = true;
hardening.format = false;
}
results in a ".attrs.json" file containing (sans the indentation):
{
"buildInputs": [],
"builder": "/nix/store/ygl61ycpr2vjqrx775l1r2mw1g2rb754-bash-4.3-p48/bin/bash",
"configureFlags": [
"--with-foo",
"--with-bar=1 2"
],
"doCheck": true,
"hardening": {
"format": false
},
"name": "foo",
"nativeBuildInputs": [
"/nix/store/10h6li26i7g6z3mdpvra09yyf10mmzdr-hello-2.10",
"/nix/store/4jnvjin0r6wp6cv1hdm5jbkx3vinlcvk-cowsay-3.03"
],
"propagatedBuildInputs": [],
"propagatedNativeBuildInputs": [],
"stdenv": "/nix/store/f3hw3p8armnzy6xhd4h8s7anfjrs15n2-stdenv",
"system": "x86_64-linux"
}
"passAsFile" is ignored in this mode because it's not needed - large
strings are included directly in the JSON representation.
It is up to the builder to do something with the JSON
representation. For example, in bash-based builders, lists/attrsets of
string values could be mapped to bash (associative) arrays.
The implementation of "partition" in Nixpkgs is O(n^2) (because of the
use of ++), and for some reason was causing stack overflows in
multi-threaded evaluation (not sure why).
This reduces "nix-env -qa --drv-path" runtime by 0.197s and memory
usage by 298 MiB (in non-Boehm mode).
Normally it's impossible to take a reference to the function passed to
callFunction, so some callers (e.g. ExprApp::eval) allocate that value
on the stack. For functors, a reference to the functor itself may be
kept, so we need to have it on the heap.
Fixes#1045
That is, unless --file is specified, the Nix search path is
synthesized into an attribute set. Thus you can say
$ nix build nixpkgs.hello
assuming $NIX_PATH contains an entry of the form "nixpkgs=...". This
is more verbose than
$ nix build hello
but is less ambiguous.
Thus, -I / $NIX_PATH entries are now downloaded only when they are
needed for evaluation. An error to download an entry is a non-fatal
warning (just like non-existant paths).
This does change the semantics of builtins.nixPath, which now returns
the original, rather than resulting path. E.g., before we had
[ { path = "/nix/store/hgm3yxf1lrrwa3z14zpqaj5p9vs0qklk-nixexprs.tar.xz"; prefix = "nixpkgs"; } ... ]
but now
[ { path = "https://nixos.org/channels/nixos-16.03/nixexprs.tar.xz"; prefix = "nixpkgs"; } ... ]
Fixes#792.
Also, move a few free-standing functions into StoreAPI and Derivation.
Also, introduce a non-nullable smart pointer, ref<T>, which is just a
wrapper around std::shared_ptr ensuring that the pointer is never
null. (For reference-counted values, this is better than passing a
"T&", because the latter doesn't maintain the refcount. Usually, the
caller will have a shared_ptr keeping the value alive, but that's not
always the case, e.g., when passing a reference to a std::thread via
std::bind.)
For example, "${{ foo = "bar"; __toString = x: x.foo; }}" evaluates
to "bar".
With this, we can delay calling functions like mkDerivation,
buildPythonPackage, etc. until we actually need a derivation, enabling
overrides and other modifications to happen by simple attribute set
update.
The value pointers of lists with 1 or 2 elements are now stored in the
list value itself. In particular, this makes the "concatMap (x: if
cond then [(f x)] else [])" idiom cheaper.
This modification moves Attr and Bindings structures into their own header
file which is dedicated to the attribute set representation. The goal of to
isolate pieces of code which are related to the attribute set
representation. Thus future modifications of the attribute set
representation will only have to modify these files, and not every other
file across the evaluator.
This relaxes restricted mode to allow access to anything in the
store. In the future, it would be better to allow access to only paths
that have been constructed in the current evaluation (so a hard-coded
/nix/store/blabla in a Nix expression would still be
rejected). However, note that reading /nix/store itself is still
rejected, so you can't use this so get access to things you don't know
about.
If ‘--option restrict-eval true’ is given, the evaluator will throw an
exception if an attempt is made to access any file outside of the Nix
search path. This is primarily intended for Hydra, where we don't want
people doing ‘builtins.readFile ~/.ssh/id_dsa’ or stuff like that.
Code that links to libnixexpr (e.g. plugins loaded with importNative, or
nix-exec) may want to provide custom value types and operations on
values of those types. For example, nix-exec is currently using sets
where a custom IO value type would be more appropriate. This commit
provides a generic hook for such types in the form of tExternal and the
ExternalBase virtual class, which contains all functions necessary for
libnixexpr's type-polymorphic functions (e.g. `showType`) to be
implemented.
With this, attribute sets with a `__functor` attribute can be applied
just like normal functions. This can be used to attach arbitrary
metadata to a function without callers needing to treat it specially.
Clearing v.app.right was not enough, because the length field of a
list only takes 32 bits, so the most significant 32 bits of v.app.left
(a.k.a. v.thunk.env) would remain. This could cause Boehm GC to
interpret it as a valid pointer.
This change reduces maximum RSS for evaluating the ‘tested’ job in
nixos/release-small.nix from 1.33 GiB to 0.80 GiB, and runtime by
about 8%.
It's slower than ExprVar since it doesn't compute a static
displacement. Since we're not using the throw primop in the
implementation of <...> anymore, it's also not really needed.
This allows error messages like:
error: the anonymous function at `/etc/nixos/configuration.nix:1:1'
called without required argument `foo', at
`/nix/var/nix/profiles/per-user/root/channels/nixos/nixpkgs/lib/modules.nix:77:59'
If we're evaluating some application ‘v = f x’, we can't store ‘f’
temporarily in ‘v’, because if ‘f x’ refers to ‘v’, it will get ‘f’
rather than an infinite recursion error.
Unfortunately, this breaks the tail call optimisation introduced in
c897bac549.
Fixes#217.
This doesn't change any functionality but moves some behavior out of the
parser and into the evaluator in order to simplify the code.
Signed-off-by: Shea Levy <shea@shealevy.com>
This adds new syntax for attribute names:
* attrs."${name}" => getAttr name attrs
* attrs ? "${name}" => isAttrs attrs && hasAttr attrs name
* attrs."${name}" or def => if attrs ? "${name}" then attrs."${name}" else def
* { "${name}" = value; } => listToAttrs [{ inherit name value; }]
Of course, it's a bit more complicated than that. The attribute chains
can be arbitrarily long and contain combinations of static and dynamic
parts (e.g. attrs."${foo}".bar."${baz}" or qux), which is relatively
straightforward for the getAttrs/hasAttrs cases but is more complex for
the listToAttrs case due to rules about duplicate attribute definitions.
For attribute sets with dynamic attribute names, duplicate static
attributes are detected at parse time while duplicate dynamic attributes
are detected when the attribute set is forced. So, for example, { a =
null; a.b = null; "${"c"}" = true; } will be a parse-time error, while
{ a = {}; "${"a"}".b = null; c = true; } will be an eval-time error
(technically that case could theoretically be detected at parse time,
but the general case would require full evaluation). Moreover, duplicate
dynamic attributes are not allowed even in cases where they would be
with static attributes ({ a.b.d = true; a.b.c = false; } is legal, but {
a."${"b"}".d = true; a."${"b"}".c = false; } is not). This restriction
might be relaxed in the future in cases where the static variant would
not be an error, but it is not obvious that that is desirable.
Finally, recursive attribute sets with dynamic attributes have the
static attributes in scope but not the dynamic ones. So rec { a = true;
"${"b"}" = a; } is equivalent to { a = true; b = true; } but rec {
"${"a"}" = true; b = a; } would be an error or use a from the
surrounding scope if it exists.
Note that the getAttr, getAttr or default, and hasAttr are all
implemented purely in the parser as syntactic sugar, while attribute
sets with dynamic attribute names required changes to the AST to be
implemented cleanly.
This is an alternative solution to and closes#167
Signed-off-by: Shea Levy <shea@shealevy.com>
Certain desugaring schemes may require the parser to use some builtin
function to do some of the work (e.g. currently `throw` is used to
lazily cause an error if a `<>`-style path is not in the search path)
Unfortunately, these names are not reserved keywords, so an expression
that uses such a syntactic sugar will not see the expected behavior
(see tests/lang/eval-okay-redefine-builtin.nix for an example).
This adds the ExprBuiltin AST type, which when evaluated uses the value
from the rootmost variable scope (which of course is initialized
internally and can't shadow any of the builtins).
Signed-off-by: Shea Levy <shea@shealevy.com>
Note that adding --show-trace prevents functions calls from being
tail-recursive, so an expression that evaluates without --show-trace
may fail with a stack overflow if --show-trace is given.
Messages like
while evaluating the attribute `outPath' at `/nix/store/212ngf4ph63mp6p1np2bapkfikpakfv7-nix-1.6/share/nix/corepkgs/derivation.nix:18:9':
are redundant, because Nix already shows that it's evaluating a derivation:
while instantiating the derivation named `firefox-24.0' at `/home/eelco/Dev/nixpkgs/pkgs/applications/networking/browsers/firefox/default.nix:131:5':
while evaluating the derivation attribute `nativeBuildInputs' at `/home/eelco/Dev/nixpkgs/pkgs/stdenv/generic/default.nix:76:17':
Commit 159e621d1a accidentally changed
the behaviour of antiquoted paths, e.g.
"${/foo}/bar"
used to evaluate to "/nix/store/<hash>-foo/bar" (where /foo gets
copied to the store), but in Nix 1.6 it evaluates to "/foo/bar". This
is inconsistent, since
" ${/foo}/bar"
evaluates to " /nix/store/<hash>-foo/bar". So revert to the old
behaviour.
Previously, a undefined variable inside a "with" caused an EvalError
(which can be caught), while outside, it caused a ParseError (which
cannot be caught). Now both cause an UndefinedVarError (which cannot
be caught).
Since they don't have location information, they just give you crap
like:
while evaluating the builtin function `getAttr':
while evaluating the builtin function `derivationStrict':
...
If a "with" attribute set fails to evaluate, we have to make sure its
Env record remains unchanged. Otherwise, repeated evaluation gives a
segfault:
nix-repl> :a with 0; { a = x; b = x; }
Added 2 variables.
nix-repl> a
error: value is an integer while an attribute set was expected
nix-repl> b
Segmentation fault
Since we already cache files in normal form (fileEvalCache), caching
parse trees is redundant.
Note that getting rid of this cache doesn't actually save much memory
at the moment, because parse trees are currently not freed / GC'ed.
This reduces the difference between inherited and non-inherited
attribute handling to the choice of which env to use (in recs and lets)
by setting the AttrDef::e to a new ExprVar in the parser rather than
carrying a separate AttrDef::v VarRef member.
As an added bonus, this allows inherited attributes that inherit from a
with to delay forcing evaluation of the with's attributes.
Signed-off-by: Shea Levy <shea@shealevy.com>
Commit 20866a7031 added a ‘withAttrs’
field to Env, which is annoying because it makes every Env structure
bigger and we allocate millions of them. E.g. NixOS evaluation took
18 MiB more. So this commit squeezes ‘withAttrs’ into values[0].
Probably should use a union...
Evaluation of attribute sets is strict in the attribute names, which
means immediate evaluation of `with` attribute sets rules out some
potentially interesting use cases (e.g. where the attribute names of one
set depend in some way on another but we want to bring those names into
scope for some values in the second set).
The major example of this is overridable self-referential package sets
(e.g. all-packages.nix). With immediate `with` evaluation, the only
options for such sets are to either make them non-recursive and
explicitly use the name of the overridden set in non-overridden one
every time you want to reference another package, or make the set
recursive and use the `__overrides` hack. As shown in the test case that
comes with this commit, though, delayed `with` evaluation allows a nicer
third alternative.
Signed-off-by: Shea Levy <shea@shealevy.com>
Functions in Nix are anonymous, but if they're assigned to a
variable/attribute, we can use the variable/attribute name in error
messages, e.g.
while evaluating `concatMapStrings' at `/nix/var/nix/profiles/per-user/root/channels/nixos/nixpkgs/pkgs/lib/strings.nix:18:25':
...
